Color Changes of Birch Wood During High-Temperature Drying

Abstract

In low-temperature drying, a high drying rate has been found to be adequate for silver birch (Betula pendula) and European white birch (B. pubescens) timber as far as wood colour is concerned. During high-temperature drying, however, birch timber darkens significantly if steam is used as the drying medium. The objective of this research was to study the effects of drying force (wet-bulb depression), timber thickness, and initial moisture content on the color of high-temperature-dried birch wood. The reflectance spectrum of wood was measured and transformed to the CIEL∗a∗b∗ color scale.

The increase in drying force increased the lightness and decreased the redness and the yellowness of wood. At the same time, the difference in color between the surface layer and the interior of boards increased. Increase in thickness and in initial moisture content increased the difference in color between the surface and the interior of boards. Pretreatment of timber with water soaking decreased the difference in color between the surface layer and the interior of boards when low drying force was used, but this difference was increased when high drying force was used.

Keywords:

• Birch
• Discoloration of wood
• Drying force
• High-temperature drying
• Moisture content

Notes

ΔE_ab∗ is the color difference between the surface layer and the core of boards. p-Values printed in bold mean significant difference in color variables between drying forces (α = 0.05).

ΔE_ab∗ is the color difference between the surface layer and the core of boards. p-Values printed in bold mean significant difference in color variables between MC_i levels (α = 0.05).

ΔE_ab∗ is the color difference between the surface layer and the core of boards. p-Values printed in bold mean significant difference in color variables between MC_i levels (α = 0.05).