Development of an Efficient Process for the Separation of Co(ii), Mn(ii), and Ni(ii) from Chloride Solution by Precipitation

ABSTRACT

The demand for nickel, cobalt, and manganese is increasing owing to their critical role in the performance of lithium-ion batteries. Precipitation is simpler to operate than solvent extraction in the separation of metal ions. In this work, precipitation-based procedures were developed to separate Co(II), Mn(II) and Ni(II) from synthetic chloride solutions. Dimethylglyoxime (DMG) was effective in selectively precipitating Ni(II) from the chloride solutions containing Co(II) and Mn(II). Solution pH greatly affected the precipitation of Ni(II) by DMG. In the first procedure, Ni(II) was first precipitated using DMG from solution with initial pH 6 at a DMG/Ni(II) molar ratio of 3, a reaction time of 30 min and then Co(II) was separated from the filtrate by precipitation with Na₂S, with optimal conditions being an initial pH of 6, a Na₂S/Co(II) molar ratio of 2 and a reaction time of 15 min. In the second procedure, both Ni(II) and Co(II) was simultaneously precipitated with Na₂S, leaving Mn(II) in the filtrate. Then the mixed sulfides of Co(II) and Ni(II) were dissolved by using HCl solution containing NaClO as an oxidizing agent. From the leaching solution, Ni(II) was separated by precipitation with DMG. Optimum conditions for the separation conditions were obtained. In both procedures, the separation degree among the three metal ions was higher than 99%. The developed procedures were simple and effective for the separation of the three metal ions compared to solvent extraction.

KEYWORDS:

• Precipitation
• dimethylglyoxime
• Sodium sulfide
• nickel
• cobalt
• manganese

Disclosure statement

No potential conflict of interest was reported by the author(s).

Supplementary material

Supplemental data for this article can be accessed online at https://doi.org/10.1080/08827508.2024.2376626

Additional information

Funding

This work was supported by the Technology Innovation Program (Development of Material Component Technology) [Project number: 20011183] funded by the Ministry of Trade, Industry & Energy (MOTIE, Korea).