123
Views
1
CrossRef citations to date
0
Altmetric
Articles

Unequal termination impedance parallel-coupled lines band-pass filter with arbitrary image impedance

ORCID Icon, ORCID Icon & ORCID Icon
Pages 984-996 | Received 03 Jul 2017, Accepted 25 Nov 2017, Published online: 18 Dec 2017
 

Abstract

This paper presents an analytical design for a microstrip parallel-coupled line bandpass filter (BPF) with arbitrary termination and image impedances. Using the proposed design formulas, multistage arbitrary termination impedance BPFs can be designed with a very high impedance transforming ratio (r). The fractional bandwidth and return losses are maintained even though the r and image impedance are varied. To validate the design formulas, two- and three-stage BPFs are fabricated and measure at the center frequency (f0) of 2.6 GHz. The filter 1 and filter 2 are designed with termination impedances of 50–300 Ω and 20–50 Ω, respectively. The measured results of both filters show a good agreement with the simulations. The measured passband insertion and return losses of filter 1 are better than 0.8 and 19.6 dB, respectively. Similarly, the measured passband insertion and return losses of filter 2 are better than 1.5 and 19 dB, respectively.

Log in via your institution

Log in to Taylor & Francis Online

PDF download + Online access

  • 48 hours access to article PDF & online version
  • Article PDF can be downloaded
  • Article PDF can be printed
USD 61.00 Add to cart

Issue Purchase

  • 30 days online access to complete issue
  • Article PDFs can be downloaded
  • Article PDFs can be printed
USD 561.00 Add to cart

* Local tax will be added as applicable

Related Research

People also read lists articles that other readers of this article have read.

Recommended articles lists articles that we recommend and is powered by our AI driven recommendation engine.

Cited by lists all citing articles based on Crossref citations.
Articles with the Crossref icon will open in a new tab.