Radial Field Detector to Improve Sensitivity of Localized Defects in Remote Field Eddy Current Technique

ABSTRACT

This paper presents the development of a cone-shaped radial magnetic-field-detector–based remote field eddy current (RFEC) probe for enhanced detection of localized defects in ferritic steel tubes. The performance of the radial coil detector has been evaluated for the detection of different types of defects such as through holes, flat bottom holes and notches of different sizes and orientations. The RFEC signals are observed to be corrupted by heavy noise due to spatial variations in material permeability. To remove the random noise from the nonstationary time series RFEC signals, empirical mode decomposition (EMD) processing has been adopted and has been found to significantly improve the signal-to-noise (SNR) ratio. Furthermore, the effect of the circumferential extent of defects on the signal amplitude is analyzed through experimental and finite-element-model–based studies. The linear resolution of the designed radial coil detector and its repeatability behavior are also scrutinized. Studies demonstrate that the developed radial field detector is a promising configuration in remote field eddy current technique for enhanced defect detection and also in designing an array probe.

KEYWORDS:

• Remote field eddy current
• radial field detector
• defects
• EMD
• probe design

Disclosure statement

No potential conflict of interest was reported by the author.