Abstract
Previous research has revealed that thermal barrier coatings with cryomilled bond coats exhibit improved thermal cycling lifetime by growing a continuous and uniform oxide layer at a slower rate; yet the mechanism controlling the ultimate failure remains unclear. In an effort to provide a foundation for understanding the improved behavior, the influence of cryomilling on the microstructure of the NiCrAlY bond coat material is investigated in this article. Rather than focusing on the alumina scale formation, the microstructural features and their evolution within the high-velocity oxy-fuel (HVOF)-sprayed NiCrAlY bond coats themselves, prepared from conventional powder and cryomilled powder, were carefully compared through extensive scanning electron microscope/energy-dispersive X-ray spectroscopy characterization. In addition, the as-cryomilled NiCrAlY powder is characterized to provide evidence of the direct influence of cryomilling and to exclude the impact from the HVOF spraying. It is found that the essential change in microstructural features resulting from the cryomilling is the creation of a homogeneous distribution of ultrafine (nanoscale) Al-rich oxide/nitride dispersoids, which remain thermally stable even after exposure at 1100°C for 100 h. The TEM study on the as-cryomilled powder, prior to the HVOF spraying, indicates that some Al and Y-rich oxides are already present within the material as a direct result of the cryomilling process.
Acknowledgements
Financial support was provided by the US Office of Naval Research (ONR) through Grant No. N00014-06-1-0506. The authors are also grateful to General Electric Energy Systems for the assistance provided with the HVOF spraying.