Analysis of plastic flow of the Al alloy joint produced by friction stir spot welding

Abstract

This study examined development of the stir zone and plastic flow of the material during friction stir spot joining of aluminium alloys. The development of the stir zone was discussed through the observation of macro sections of the joints produced at various process times. The friction stir spot joining trial with insert of Au foil to lap surface and the dissimilar lap friction stir spot joining showed that the movement of the lap surface was attributed to the downward plastic flow from the upper plate to the lower plate around the probe. Additionally, it was clarified that the direction of the plastic flow was roughly the same as the direction of the tool rotation. The dissimilar butt friction stir spot joining suggested that the plastic flow occurred not only within the stir zone but also in a larger area below the tool shoulder. The present study revealed that the threads on the probe surface were important for producing the plastic flow of thickness direction during friction stir spot joining.

Keywords:

• friction stir spot welding
• aluminium alloy
• stir zone
• plastic flow
• insert material
• thread