Power attenuation and focus shift of solid state laser beam caused by laser-induced plume

Abstract

Currently, remote laser welding using solid-sate lasers is widespread in industry. Meanwhile, it is well known that the laser-induced plume blown up from the processing point affects penetration in laser welding, through the attenuation and the refraction of the laser beam. These phenomena in carbon dioxide laser welding have been investigated well and it is widely recognized that using the shielding gas flow to blow away the laser-induced plume is very important. However, in remote laser welding it is not easy to maintain the shielding gas flow to the processing point. By the way, these phenomena depend on the wavelength of the laser. So, quantitative knowledge of the attenuation and refraction of the solid state laser beam are necessary in achieving stable penetration in remote laser welding with this laser. This study was made to determine the attenuation coefficient and the amount of the effective focus shift caused by refraction of the laser beam in the plume, through melt run experiments with a YAG laser. The attenuation coefficient of the laser beam was estimated to be 0.00090 mm⁻¹ from the dependence of the cross-sectional area of weld metal on the laser power and the plume length. This value is about one twentieth of the attenuation coefficient of a carbon dioxide laser beam at welding found in the literature. The amount of focus shift was estimated to be 0.67 mm per 100 mm plume length, from the dependency of penetration depth on the defocusing distance and the plume length. Comparing the 3 mm of plume length, this value is centesimal of the estimated value by Beck et al. [The effect of plasma formation on beam focusing in deep penetration welding with CO₂ lasers. J. Phys. D: Appl. Phys. 1995;28:2430–2442] in CO₂ laser welding. Therefore, a solid-state laser such as a YAG laser is considered to be a suitable laser source for remote laser welding.

Keywords:

• Power attenuation
• focus shift
• solid state laser
• laser-induced plume
• solid-state laser
• refraction
• attenuation coefficient
• YAG laser
• CO₂ laser

Notes

Selected from Quarterly Journal of the Japan Welding Society 2014 32(3) 180–190.