Abstract
Research on chemical modification of pineapple peel fibre with succinic anhydride was carried out to create a novel adsorbent for Cu2+, Cd2+ and Pb2+ removal from aqueous solution. After pretreatment with iso‐propyl alcohol and NaOH, pineapple peel fibre was modified via reaction with succinic anhydride for introduction of carboxylic functional groups. The modified pineapple peel fibre was characterized with Fourier transform infrared (FTIR) spectroscopy and evaluated for its adsorptive ability for Cu2+, Cd2+ and Pb2+ from synthetic metal solutions. The FTIR analysis proved the introduction of carboxylic functional groups in the backbone of the modified pineapple peel fibre. The modified pineapple peel fibre showed higher adsorptive capacity for Cu2+, Cd2+ and Pb2+ compared with raw pineapple peel and pineapple peel fibre pretreated with iso‐propyl alcohol. The adsorption of Cu2+, Cd2+ and Pb2+ on the modified pineapple peel fibre depended on solution pH value, adsorption time and initial metal concentration. The maximum adsorption capacities of the modified fibre were observed at pH 5.4 for Cu2+ (27.68 ± 0.83 mg g−1 or 0.44 mmol g−1), at pH 7.5 for Cd2+ (34.18 ± 1.02 mg g−1 or 0.30 mmol g−1) and at pH 5.6 for Pb2+ (70.29 ± 2.11 mg g−1 or 0.34 mmol g−1) respectively. The adsorption followed the pseudo‐second‐order kinetics model and the experimental data coincided well with the Langmuir model.
Acknowledgement
The authors are grateful for the financial support from the Department of Science and Technology of Guangdong Province, China (Grant No. 2007A020901003, 2007B090100009, 2008A024200003) and the Ministry of Science and Technology of PRC (Grant No. 2007EA780005).