Degradation of gas-phase organic contaminants via nitrogen-embedded one-dimensional rod-shaped titania in a plug-flow reactor

Abstract

In this study, one-dimensional rod-shaped titania (RST) and nitrogen-doped RST (N-RST) with different ratios of N to Ti were prepared using a hydrothermal method and their applications for purification of indoor toxic organic contaminants in a plug-flow reactor were examined under visible or ultraviolet (UV) irradiation. The surface characteristics of as-prepared photocatalysts were investigated by transmission electron microscopy (TEM), X-ray diffraction (XRD), and UV–visible spectroscopy. The TEM images revealed that both pure RSTs and N-RSTs displayed uniform and nanorod-shaped structures. XRD revealed that the photocatalysts had crystalline TiO₂. The UV–visible spectra demonstrated that the N-RSTs could be activated in the visible region. In most cases, N-RSTs showed higher degradation efficiencies than pure RSTs under visible-light and UV irradiation. N-RSTs with a N-to-Ti ratio of 0.5 exhibited the highest degradation efficiencies of benzene, toluene, ethyl benzene, and o-xylene (BTEX), suggesting the presence of an optimal N-to-Ti ratio for preparation of N-RSTs. In addition, the average degradation efficiencies of BTEX determined for the N-RSTs with a N-to-Ti ratio of 0.5 under visible-light irradiation for the lowest initial concentration (IC, 0.1 ppm) were 19%, 53%, 85%, and 92%, respectively, while the degradation efficiencies for the highest IC (2.0 ppm) were 2%, 8%, 17%, and 33%. These values decreased as the stream flow rate increased. Overall, the as-prepared N-RSTs could be effectively applied for degradation of toxic gas-phase organic contaminants under visible-light as well as UV irradiation.

Keywords:

• indoor toxic organic pollutant
• nitrogen-to-titanium ratio
• nanorod-shaped
• visible-light
• operational condition