Performance of a combined system of biotrickling filter and photocatalytic reactor in treating waste gases from a paint-manufacturing plant

Abstract

A pilot-scale biotrickling filter (BTF) was established in treating the waste gases that are intermittently produced from an automobile paint-manufacturing workshop. Results showed that the BTF required longer time to adapt to the aromatic compounds. The removal efficiencies (REs) for all aliphatic compounds reached more than 95% on day 80. Aromatic compounds were not easily removed by the BTF. The REs obtained by the BTF for toluene, ethylbenzene, m-xylene, o-xylene and p-xylene on day 80 were 72.7%, 77.2%, 71.9%, 74.8% and 60.0%, respectively. A maximum elimination capacity (EC) of 13.8 g-C m⁻³ h⁻¹ of the BTF was achieved at an inlet loading rate of 19.4 g-C m⁻³ h⁻¹ with an RE of 72%. Glucose addition promoted the biomass accumulation despite the fact that temporal decrease of REs for aromatic compounds occurred. When the inlet loading rates exceed 11.1 g-C m⁻³ h⁻¹, the REs of the aromatic compounds decreased by 10% to 15%. This negative effect of shock loads on the performance of the BTF can be attenuated by the pre-treatment of the photocatalytic reactor. Nearly all components were removed by the combined system with REs of 99%.

Keywords:

• biotrickling filter
• volatile organic compounds
• biofilm
• shock loads
• photocatalytic reactor

Disclosure statement

No potential conflict of interest was reported by the authors.

Additional information

Funding

This work was supported by the Scientific and Technology project of Guangdong Province [2012B09100160, 2013B030600002] and the Natural Science Foundation of China [31270169].