Effect of intervertebral translational flexibilities on estimations of trunk muscle forces, kinematics, loads, and stability

Abstract

Due to the complexity of the human spinal motion segments, the intervertebral joints are often simulated in the musculoskeletal trunk models as pivots thus allowing no translational degrees of freedom (DOFs). This work aims to investigate, for the first time, the effect of such widely used assumption on trunk muscle forces, spinal loads, kinematics, and stability during a number of static activities. To address this, the shear deformable beam elements used in our nonlinear finite element (OFE) musculoskeletal model of the trunk were either substantially stiffened in translational directions (SFE model) or replaced by hinge joints interconnected through rotational springs (HFE model). Results indicated that ignoring intervertebral translational DOFs had in general low to moderate impact on model predictions. Compared with the OFE model, the SFE and HFE models predicted generally larger L4–L5 and L5–S1 compression and shear loads, especially for tasks with greater trunk angles; differences reached ∼15% for the L4–L5 compression, ∼36% for the L4–L5 shear and ∼18% for the L5–S1 shear loads. Such differences increased, as location of the hinge joints in the HFE model moved from the mid-disc height to either the lower or upper endplates. Stability analyses of these models for some select activities revealed small changes in predicted margin of stability. Model studies dealing exclusively with the estimation of spinal loads and/or stability may, hence with small loss of accuracy, neglect intervertebral translational DOFs at smaller trunk flexion angles for the sake of computational simplicity.

Keywords::

• spine
• model
• optimization
• intervertebral joint
• degrees of freedom

Notes

^1. Email: [email protected]

^2. Email: [email protected]

Additional information

Funding

This work is supported by grants from Sharif University of Technology (Tehran, Iran) and Institut de recherche Robert-Sauvé en santé etensécurité du travail, IRSST (Montréal, Canada).