Article title: Results of surface hot-in place recycling (remix) of modified and alternative asphalt mixtures in Finland. Part I: Mixture scale
Authors: Castillo, D., Falchetto, A. C., & Korkiala-Tanttu, L.
Journal: International Journal of Pavement Engineering
DOI: http://dx.doi.org/10.1080/10298436.2022.2134568
When the above article was first published online, the left and right ends of the Figure 7 were cut off.
The correct figure can be found below:
Figure 7. Layer thickness of all cores from the project, before and after remix/rut-remix. Up to four layers were identified. (a) Ylöjärvi, (b) Kilvakkala, (c) Riihimäki, (d) Oulu.
Notes: Notice the AV/RV distinction when applicable. Vertical axes are shown to scale. 100-mm and 150-mm diameter cores are presented together in Riihimäki RUT-REM and Oulu REM. Notice the spatial correlation in Oulu REM.
![Figure 7. Layer thickness of all cores from the project, before and after remix/rut-remix. Up to four layers were identified. (a) Ylöjärvi, (b) Kilvakkala, (c) Riihimäki, (d) Oulu.Notes: Notice the AV/RV distinction when applicable. Vertical axes are shown to scale. 100-mm and 150-mm diameter cores are presented together in Riihimäki RUT-REM and Oulu REM. Notice the spatial correlation in Oulu REM.](/cms/asset/ec15a3c2-39e8-4a8a-9a76-84c86a9d2089/gpav_a_2150431_f0001_oc.jpg)
This article is available both online and in print. The online version has been corrected.