![Sample our Health and Social Care journals, sign in here to start your FREE access for 14 days]({"type":"image" , "src" : "/sda/5938/TOC-Subject-Sample-2021-Health-Social-Care.jpg"})
ABSTRACT
Two-wheeled wheelchairs are considered highly nonlinear and complex systems. The systems mimic a double-inverted pendulum scenario and will provide better maneuverability in confined spaces and also to reach higher level of height for pick and place tasks. The challenge resides in modeling and control of the two-wheeled wheelchair to perform comparably to a normal four-wheeled wheelchair. Most common modeling techniques have been accomplished by researchers utilizing the basic Newton’s Laws of motion and some have used 3D tools to model the system where the models are much more theoretical and quite far from the practical implementation. This article is aimed at closing the gap between the conventional mathematical modeling approaches where the integrated 3D modeling approach with validation on the actual hardware implementation was conducted. To achieve this, both nonlinear and a linearized model in terms of state space model were obtained from the mathematical model of the system for analysis and, thereafter, a 3D virtual prototype of the wheelchair was developed, simulated, and analyzed. This has increased the confidence level for the proposed platform and facilitated the actual hardware implementation of the two-wheeled wheelchair. Results show that the prototype developed and tested has successfully worked within the specific requirements established.
Acknowledgments
The authors would like to express their gratitude to International Islamic University Malaysia for providing facilities to conduct this research.
Funding
This research was funded by the Ministry of Science, Technology, and Innovations (MOSTI), Malaysia under the E-Science Fund.