![Sample our Engineering & Technology journals, sign in here to start your access, latest two full volumes FREE to you for 14 days]({"type":"image" , "src" : "/sda/5933/TOC-Subject-Sample-2021-Engineering-Tech.jpg"})
Abstract
Physical and chemical characterizations of soot in diesel engine oils are conducted to investigate the impact of soot properties on friction coefficient between reciprocating rubbing metal surfaces. In SRV friction tests, soot in an engine oil categorized in API CC-4 appeared to act as friction modifiers, since a higher content of soot in the oil caused lower friction, especially in the low temperature range between 40° and 90°C. In contrast, there is no significant difference obtained in friction coefficient between the presence and absence of soot in other CD and CG-4 oils. Distribution of soot particle sizes was measured with the DLS (Dynamic Light Scattering) technique to examine the correlation between lower frictional characteristics and fraction of soot particle sizes less than the estimated oil film thickness. Soot aggregates dispersed in the oils were also observed with the TEM-FFR (Freeze Fracture Replica) technique to investigate the impact of the actual state of soot in oils on frictional behavior.
