![Sample our Physical Sciences journals, sign in here to start your FREE access for 14 days]({"type":"image" , "src" : "/sda/110819/TOC-Subject-Sample-2021-Physical-Sciences.jpg"})
Abstract
A previously developed deterministic elastohydrodynamic (EHD) numerical model for small fluid film bearings functioning in the mixed lubrication regime is extended in this work by considering the rough contact. Several simplifying hypotheses are made: the shaft is considered rigid and smooth, turning at low speeds (isothermal regime), and the pad is assumed to have an elastic-perfectly-plastic behavior. The Reynolds equation is solved on a very fine mesh and the elasto-plastic pad deformation caused by the hydrodynamic pressure is taken into account. A deterministic active set-based method is used for determining the contact pressure, the contact extent, and the corresponding deformation. The results are presented for a partial journal bearing configuration, with a linear shaft velocity of 0.47 m/s under specific pressures varying up to 50 MPa. Two pad materials are considered, and the lubricant is either isoviscous or piezoviscous oil. The simulation results, presented as a function of the bearing specific pressure, include eccentricity, the film thickness, the friction torques, the contact extent, etc. Stribeck curves showing the evolution of the friction coefficient in the hydrodynamic and mixed lubrication regimes are also discussed.
Acknowledgments
Review led by Gita Talmage