![Sample our Engineering & Technology journals, sign in here to start your access, latest two full volumes FREE to you for 14 days]({"type":"image" , "src" : "/sda/5933/TOC-Subject-Sample-2021-Engineering-Tech.jpg"})
Abstract
This study investigates the material removal mechanisms and machining damage in drilling of carbon fiber epoxy composite by electrical discharge machining (EDM). Detailed investigation of the morphology of the machined surfaces and elemental analysis were conducted inside a scanning electron microscope. Machining damage was characterized by the extent of delamination, hole taper, and the average width of the heat-affected zone (HAZ). The effect of pulse-on time and gap current on machining damage was also investigated. It was found that material removal occurred mainly in the form of decomposition of the polymer matrix and thermally induced fracture of the carbon fibers. Vaporization of the carbon fibers due to spark and Joule heating is also a possible mechanism. The width of HAZ was found to be influenced the most by pulse-on time where the minimum HAZ occurred for intermediate pulse-on time. Furthermore, the width of HAZ and hole taper in EDM were found to be comparable to or less than those obtained by laser cutting.