The Preparation of a Fatigue-Free Bi₄Ti₃O₁₂ Thin Film With Controlling Bi-Excess Using Sol-Gel Coating

Abstract

A polycrystalline Bi₄Ti₃O₁₂ (BIT) thin film of ∼150 nm was fabricated by sol-gel process on Pt/Ti/SiO₂/Si substrate. We observed that excess Bi concentration for precursor could influence the microstructure of the BIT film and thereby change the fatigue behavior. A high fatigue endurance of the BIT thin film was obtained, when the Bi excess was 1.0 mole %. This film exhibited enhanced a(b)-axis orientation and highly smooth surface consisted of grains of ∼30 nm in size. The remanent polarization and the coercive field were 8 μC/cm² and 129 kV/cm at 8 V, respectively. The leakage current density was ∼1.5 × 10⁻⁷ A/cm² at 4.5 V. An excellent fatigue endurance was observed up to 1 × 10¹⁰ switching cycles.

Keywords:

• Bismuth titanate
• ferroelectric film
• sol-gel
• fatigue

ACKNOWLEDGEMENTS

This work was supported by the Ministry of Information & Communication in the Republic of Korea through University Program.