Properties of Fly Ash as Hydraulic Barrier

Abstract

This study examines the suitability of pozzolanic fly ash as a hydraulic barrier and the use of bentonite to enhance geotechnical properties of fly ash. The behavior of fly ash is studied not only with water but also with different pore fluids, such as acid, alkali, salts, and neutral organic fluid to assess its chemical compatibility. While some geotechnical properties of fly ash meet the requirements of liner material, the disadvantage of using of fly ash alone is that it has a low cation exchange capacity and high hydraulic conductivity. The compressibility of fly ash reduces with alkaline solution but increases with acidic solutions. While alkaline or neutral inorganic solutions do not affect the hydraulic conductivity of fly ash, the addition of dilute acid increases the hydraulic conductivity. Addition of bentonite improves the geotechnical properties of fly ash such as cation exchange capacity, shrinkage and volume change behavior, etc. Fly ash-bentonite mixtures possess low shrinkage and hence do not crack. Compacted fly ash-bentonite mixtures undergo very little volume changes under various stress conditions. The hydraulic conductivity of fly ash is reduced after amendment with bentonite. Though the unconfined compressive strength of the mixture is lower than that of fly ash alone, the fly ash-bentonite mixture still possesses good strength. The compressibility of fly ash bentonite mixtures are lower with different pore fluids studied than with water. The hydraulic conductivity of fly ash-bentonite mixtures are slightly higher in different pore fluids studied than with water.

Keywords:

• Fly ash
• land fills
• hydraulic conductivity
• hydraulic barrier.