![Sample our Physical Sciences journals, sign in here to start your FREE access for 14 days]({"type":"image" , "src" : "/sda/110819/TOC-Subject-Sample-2021-Physical-Sciences.jpg"})
ABSTRACT
In this research, an efficient fabrication process of conducting polypyrrole (PPy)/silicon nitride (Si3N4) hybrid materials were developed in order to be employed as transducers in electrochemical sensors used in various environmental and biomedical applications. The fabrication process was assisted by oxidative polymerization of pyrrole (Py) monomer on the surface of Si/SiO2/Si3N4 substrate in presence of FeCl3 as oxidant. To improve the adhesion of PPy layer to Si3N4 surface, a pyrrole-silane (SPy) was chemically bonded through silanization process onto the Si3N4 surface before deposition of PPy layer. After Py polymerization, Si/SiO2/Si3N4-(SPy-PPy) substrate was formed. The influence of SPy concentration and temperature of silanization process on chemical composition and surface morphology of the prepared Si/SiO2/Si3N4-(SPy-PPy) substrates was studied by FTIR and SEM. In addition, the electrical properties of the prepared substrates were characterized by cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS). It was found that the best silanization reaction conditions to get Si/SiO2/Si3N4-(SPy-PPy) substrate with high PPy adhesion and good electrical conductivity were obtained by using SPy at low concentration (4.3 mM) at 90°C. These promising findings open the way for fabrication of new hybrid materials which can be used as transducers in miniaturized sensing devices for various environmental and biomedical applications.
Acknowledgements
We acknowledge the funding through the European Communities Seventh Framework Programme entitled Sea-on-a-Chip (FP7-OCEAN-2013) (No.614168), and the European Union's Horizon 2020 research and innovation program entitled HEARTEN under grant agreement No 643694, and FP7-PEOPLE-2012-IRSES under the grant agreement No. 318053 (SMARTCANCERSENS).