339
Views
0
CrossRef citations to date
0
Altmetric
Index

Index

Subject Index

Abatement Technologies

Understanding selected trace elements behavior in a coal-fired power plant in Malaysia for assessment of abatement technologies, 867

Acidic Electrolyzed Water

Slightly acidic electrolyzed water for reducing airborne microorganisms in a layer breeding house, 494

Acid Leaching

An effective utilization of the slag from acid leaching of coal-waste: Preparation of water glass with a low-temperature co-melting reaction, 887

Activated Acid Clays

Decomposition of organochlorine compounds in flue gas from municipal solid waste incinerators using natural and activated acid clays, 1021

Activated Carbon Fibers

Simultaneous removal of sulfur dioxide and polycyclic aromatic hydrocarbons from incineration flue gas using activated carbon fibers, 1038

Adsorption

Application of magnetically modified sewage sludge ash (SSA) in ionic dye adsorption, 141

Carbon dioxide adsorption on amine-impregnated mesoporous materials prepared from spent quartz sand, 827

AERMOD

AERMOD performance evaluation for three coal-fired electrical generating units in Southwest Indiana, 280

Statistical evaluation of a new air dispersion model against AERMOD using the Prairie Grass data set, 219

Aerosol-to-Liquid Particle Extraction System (ALPXS)/ICP-MS

Evaluating the capabilities of Aerosol-to-Liquid Particle Extraction System (ALPXS)/ICP-MS for monitoring trace metals in indoor air, 1028

Airborne Carbonyls

Evaluation of hazardous airborne carbonyls on a university campus in southern China, 903

Airborne Microorganisms

Slightly acidic electrolyzed water for reducing airborne microorganisms in a layer breeding house, 494

Airborne Particulate Matter

Difference in concentration trends of airborne particulate matter during rush hour on weekdays and Sundays in Tokyo, Japan, 1045

Airborne Polycyclic Aromatic Hydrocarbons

Airborne polycyclic aromatic hydrocarbons in a medium-sized city affected by preharvest sugarcane burning and inhalation risk for human health, 1130

Air Dispersion Model

Statistical evaluation of a new air dispersion model against AERMOD using the Prairie Grass data set, 219

Air Emissions

An exploratory study of air emissions associated with shale gas development and production in the Barnett Shale, 61

Air Pollutants

Air pollutant emissions from the development, production, and processing of Marcellus Shale natural gas, 19

Concentrations of mobile source air pollutants in urban microenvironments, 743

Air Pollution

A model for interprovincial air pollution control based on futures prices, 552

Process analysis of a regional air pollution episode over Pearl River Delta Region, China, using the MM5-CMAQ model, 406

Air Quality

Changes in air quality at near-roadway schools after a major freeway expansion in Las Vegas, Nevada, 1003

Changes in weather and climate extremes: State of knowledge relevant to air and water quality in the United States, 184

Characterization of indoor air quality and resident health in an Arizona senior housing apartment building, 1251

Implementation and application of sub-grid-scale plume treatment in the latest version of EPA’s third-generation air quality model, CMAQ 5.01, 453

Installation of platform screen doors and their impact on indoor air quality: Seoul subway trains, 1054

A laboratory study of microalgae-based ammonia gas mitigation with potential application for improving air quality in animal production operations, 330

Space-time analysis of the Air Quality Model Evaluation International Initiative (AQMEII) Phase 1 air quality simulations, 388

Trends in on-road vehicle emissions and ambient air quality in Atlanta, Georgia, USA, from the late 1990s through 2009, 808

Air Quality Model Evaluation International Initiative (AQMEII)

Space-time analysis of the Air Quality Model Evaluation International Initiative (AQMEII) Phase 1 air quality simulations, 388

Air Quality Models

Introduction to a special grouping of papers from the 2013 A&WMA International Specialty Conference, Guideline on Air Quality Models: The Path Forward, 247

Air Quality Monitoring Network

A multi-objective assessment of an air quality monitoring network using environmental, economic, and social indicators and GIS-based models, 721

Air Sampler PM2.5 Measurements

A two-step approach for relating tapered element oscillating microbalance and dichotomous air sampler PM2.5 measurements, 1195

Air Treatment

A hybrid biological process of indoor air treatment for toluene removal, 1402

Ambient Air Quality

Impact of emissions from natural gas production facilities on ambient air quality in the Barnett Shale area: A pilot study, 1368

Ambient Particulate Matter

Trivalent chromium solubility and its influence on quantification of hexavalent chromium in ambient particulate matter using EPA method 6800, 1438

Ambient Tapered Element

Improving the correlations of ambient tapered element oscillating microbalance PM2.5 data and SHARP 5030 Federal Equivalent Method in Ontario: A multiple linear regression analysis, 104

Ammonia

A laboratory study of microalgae-based ammonia gas mitigation with potential application for improving air quality in animal production operations, 330

Animal Feeding Operation Facility

Major ionic compositions of fine particulate matter in an animal feeding operation facility and its vicinity, 1279

Animal Production Operations

A laboratory study of microalgae-based ammonia gas mitigation with potential application for improving air quality in animal production operations, 330

Antimony Waste

Immobilization of antimony waste slag by applying geopolymerization and stabilization/solidification technologies, 1288

Aromatic Hydrocarbons

Airborne polycyclic aromatic hydrocarbons in a medium-sized city affected by preharvest sugarcane burning and inhalation risk for human health, 1130

Artificial Neural Network

Modeling of methane oxidation in landfill cover soil using an artificial neural network, 150

Asthma

Childhood asthma acute primary care visits, traffic, and traffic-related pollutants, 561

Atmospheric Aerosol (PM2.5)

Analysis of atmospheric aerosol (PM2.5) in Recife city, Brazil, 519

Atmospheric Distillation

Recovery of elemental sulfur from zinc concentrate direct leaching residue using atmospheric distillation: A pilot-scale experimental study, 95

Atmospheric Nitrous Acid

Sources of atmospheric nitrous acid: State of the science, current research needs, and future prospects, 1232

Atmospheric Pollutants

An integrated simulation and optimization approach for managing human health risks of atmospheric pollutants by coal-fired power plants, 704

Measurement of atmospheric pollutants associated with oil and natural gas exploration and production activity in Pennsylvania’s Allegheny National Forest, 1062

Attainment Demonstrations

Modeled and observed fine particulate matter reductions from state attainment demonstrations, 995

A&WMA International Specialty Conference

Introduction to a special grouping of papers from the 2013 A&WMA International Specialty Conference, Guideline on Air Quality Models: The Path Forward, 247

Barnett Shale

An exploratory study of air emissions associated with shale gas development and production in the Barnett Shale, 61

Impact of emissions from natural gas production facilities on ambient air quality in the Barnett Shale area: A pilot study, 1368

Bed Air Biofilter

Treatment of hydrophobic VOCs in trickling bed air biofilter: Emphasis on long-term effect of initial alternate use of hydrophilic VOCs and microbial species evolution, 1102

Biochar

Effect of biochar on nitrous oxide emission and its potential mechanisms, 894

Biomass

Investigation of time-resolved atmospheric conditions and indoor/outdoor particulate matter concentrations in homes with gas and biomass cook stoves in Nogales, Sonora, Mexico, 759

Biosolids

Development of a chemical kinetic model for a biosolids fluidized-bed gasifier and the effects of operating parameters on syngas quality, 160

Black Carbon

Particle size distribution and its relationship to black carbon in two urban and one rural site in Santiago de Chile, 785

Public Health and Components of Particulate Matter: The Changing Assessment of Black Carbon, 617, 620, 1221

Burning Practices

Indoor pollution and burning practices in wood stove management, 1309

Carbon

Laccase production by Phomopsis liquidambari B3 cultured with food waste and wheat straw as the main nitrogen and carbon sources, 1154

Particle size distribution and its relationship to black carbon in two urban and one rural site in Santiago de Chile, 785

Production of granular activated carbon from food-processing wastes (walnut shells and jujube seeds) and its adsorptive properties, 879

Carbon Dioxide

Carbon dioxide adsorption on amine-impregnated mesoporous materials prepared from spent quartz sand, 827

Photocatalytic reduction of carbon dioxide to methanol and formic acid by graphene-TiO2, 578

Toward verifying fossil fuel CO2 emissions with the CMAQ model: Motivation, model description and initial simulation, 419

Carbonyl

Analysis of mobile source air toxics (MSATs)—Near-road VOC and carbonyl concentrations, 349

Chemical Kinetic Model

Development of a chemical kinetic model for a biosolids fluidized-bed gasifier and the effects of operating parameters on syngas quality, 160

Childhood Asthma

Childhood asthma acute primary care visits, traffic, and traffic-related pollutants, 561

Chromium Solubility

Trivalent chromium solubility and its influence on quantification of hexavalent chromium in ambient particulate matter using EPA method 6800, 1438

Climate Change

Global climate change: The quantifiable sustainability challenge, 979

CMAQ

Sensitivity analyses of factors influencing CMAQ performance for fine particulate nitrate, 374

Toward verifying fossil fuel CO2 emissions with the CMAQ model: Motivation, model description and initial simulation, 419

CMAQ 5.01

Implementation and application of sub-grid-scale plume treatment in the latest version of EPA’s third-generation air quality model, CMAQ 5.01, 453

Coal-Fired Electrical Generating Units

AERMOD performance evaluation for three coal-fired electrical generating units in Southwest Indiana, 280

Coal-Fired Power Plant

Understanding selected trace elements behavior in a coal-fired power plant in Malaysia for assessment of abatement technologies, 867

Analysis and discussion on formation and control of primary particulate matter generated from coal-fired power plants, 1341

An integrated simulation and optimization approach for managing human health risks of atmospheric pollutants by coal-fired power plants, 704

Carbon dioxide emission tallies for 210 U.S. coal-fired power plants: A comparison of two accounting methods, 73

Coal-Waste

An effective utilization of the slag from acid leaching of coal-waste: Preparation of water glass with a low-temperature co-melting reaction, 887

Collection Mechanisms

Preparation of electrospun polyurethane filter media and their collection mechanisms for ultrafine particles, 322

Co-Melting Reaction

An effective utilization of the slag from acid leaching of coal-waste: Preparation of water glass with a low-temperature co-melting reaction, 887

Community Modeling and Analysis System (CMAS) Conference

Introduction to a special grouping of papers from the 2012 Community Modeling and Analysis System (CMAS) Conference, 373

Comparative Statistical Study

Comparative statistical study of hourly precipitation determined by radar-based Stage IV and ground-based methods in the North Central United States, 291

Complex Smelting Facility

Combined analysis of modeled and monitored SO2 concentrations at a complex smelting facility, 272

Computational Fluid Dynamics Modeling

Computational fluid dynamics modeling of laboratory flames and an industrial flare, 1328

Continuous Emissions Monitor

Laboratory testing of a continuous emissions monitor for hydrochloric acid, 670

Copper Biosorption Efficiency

Evaluation of different isotherm models, kinetic, thermodynamic, and copper biosorption efficiency of Lobaria pulmonaria (L.) Hoffm., 115

Depolymerization

Role of sodium ions in the vitrification process: Glass matrix modification, slag structure depolymerization, and influence of metal immobilization, 774

Diesel Engine Generator

Effects of water-emulsified fuel on a diesel engine generator’s thermal efficiency and exhaust, 970

Diesel Soot

Low emission zones reduce PM10 mass concentrations and diesel soot in German cities, 481

Diffusion-Controlled Toluene Reference Material

Diffusion-controlled toluene reference material for VOC emissions testing: International interlaboratory study, 468

Dioxin

Comparison of variability in dioxin and furan data acquired using single train and simultaneous multiple train stack sampling methods, 1093

Direct N2O Decomposition

Direct N2O decomposition over La2NiO4-based perovskite-type oxides, 1260

Dispersion Model Evaluation

A suggested method for dispersion model evaluation, 255

Dispersion Models

Minimum turbulence assumptions and u* and L estimation for dispersion models during low-wind stable conditions, 309

Dust Storms

Contribution of dust storms to PM10 levels in an urban arid environment, 89

PM10 concentration levels at an urban and background site in Cyprus: The impact of urban sources and dust storms, 1351

Dye Adsorption

Application of magnetically modified sewage sludge ash (SSA) in ionic dye adsorption, 141

Electric-Vaporizing Sources

Preparation of needle trap samplers to extract air compounds from indoor electric-vaporizing sources, 488

Electrospinning

Study on particulates and volatile organic compounds removal with TiO2 nonwoven filter prepared by electrospinning, 738

Electrospun Polyurethane Filter Media

Preparation of electrospun polyurethane filter media and their collection mechanisms for ultrafine particles, 322

Elemental Sulfur Recovery

Recovery of elemental sulfur from zinc concentrate direct leaching residue using atmospheric distillation: A pilot-scale experimental study, 95

Emission Control

Planning of methane emission control from hoggery using an inexact two-stage optimization model, 1140

Emissions

An uncertainty analysis of mean flow velocity measurements used to quantify emissions from stationary sources, 679

Assessment of nitrous oxide emission from cement plants: Real data measured with both Fourier transform infrared and nondispersive infrared techniques, 1270

Carbon dioxide emission tallies for 210 U.S. coal-fired power plants: A comparison of two accounting methods, 73

Effect of biochar on nitrous oxide emission and its potential mechanisms, 894

Effect of low-density polyethylene on smoke emissions from burning of simulated debris piles, 690

Estimating and comparing greenhouse gas emissions with their uncertainties using different methods: A case study for an energy supply utility, 1164

Heavy-duty, off-road diesel engine low-load particle number emissions and particle control, 1186

Impact of emissions from natural gas production facilities on ambient air quality in the Barnett Shale area: A pilot study, 1368

Laboratory testing of a continuous emissions monitor for hydrochloric acid, 670

Low emission zones reduce PM10 mass concentrations and diesel soot in German cities, 481

Open burning and open detonation PM10 mass emission factor measurements with optical remote sensing, 227

Toward verifying fossil fuel CO2 emissions with the CMAQ model: Motivation, model description and initial simulation, 419

Trends in on-road vehicle emissions and ambient air quality in Atlanta, Georgia, USA, from the late 1990s through 2009, 808

Emissions Testing

Diffusion-controlled toluene reference material for VOC emissions testing: International interlaboratory study, 468

Emissions Variability Processor (EMVAP)

Emissions Variability Processor (EMVAP): Design, evaluation, and application, 1389

Energy Supply Utility

Estimating and comparing greenhouse gas emissions with their uncertainties using different methods: A case study for an energy supply utility, 1164

Enterococcus faecalis

Inactivation of airborne Enterococcus faecalis and infectious bursal disease virus using a pilot-scale ultraviolet photocatalytic oxidation scrubber, 38

Environmental Impacts

Freight shipment modal split and its environmental impacts: An exploratory study, 2

EPA Method

Trivalent chromium solubility and its influence on quantification of hexavalent chromium in ambient particulate matter using EPA method 6800, 1438

Fine Particulate Matter

Composition and secondary formation of fine particulate matter in the Salt Lake Valley: Winter 2009, 957

Fine Particulate Matter Reduction

Modeled and observed fine particulate matter reductions from state attainment demonstrations, 995

Flue Gas From Municipal Solid Waste Incinerators

Decomposition of organochlorine compounds in flue gas from municipal solid waste incinerators using natural and activated acid clays, 1021

Fluorescent Lamps

Recycling research on spent fluorescent lamps on the basis of extended producer responsibility in China, 1299

Food-Processing Wastes

Production of granular activated carbon from food-processing wastes (walnut shells and jujube seeds) and its adsorptive properties, 879

Food Waste

Laccase production by Phomopsis liquidambari B3 cultured with food waste and wheat straw as the main nitrogen and carbon sources, 1154

Formic Acid

Photocatalytic reduction of carbon dioxide to methanol and formic acid by graphene-TiO2, 578

Fossil Fuel

Toward verifying fossil fuel CO2 emissions with the CMAQ model: Motivation, model description and initial simulation, 419

Fourier Transform

Assessment of nitrous oxide emission from cement plants: Real data measured with both Fourier transform infrared and nondispersive infrared techniques, 1270

Freeway Expansion

Changes in air quality at near-roadway schools after a major freeway expansion in Las Vegas, Nevada, 1003

Freight Shipment Modal Split

Freight shipment modal split and its environmental impacts: An exploratory study, 2

Gas

Investigation of time-resolved atmospheric conditions and indoor/outdoor particulate matter concentrations in homes with gas and biomass cook stoves in Nogales, Sonora, Mexico, 759

Gas Emissions

Estimating and comparing greenhouse gas emissions with their uncertainties using different methods: A case study for an energy supply utility, 1164

Gas Mitigation

A laboratory study of microalgae-based ammonia gas mitigation with potential application for improving air quality in animal production operations, 330

Gasoline Vehicles

Particulate matter speciation profiles for light-duty gasoline vehicles in the United States, 529

Geopolymerization

Immobilization of antimony waste slag by applying geopolymerization and stabilization/solidification technologies, 1288

GIS-Based Models

A multi-objective assessment of an air quality monitoring network using environmental, economic, and social indicators and GIS-based models, 721

GIS Technology

Identifying problems for choosing suitable areas for installation of a new landfill through GIS technology: A case study, 80

Glass Matrix Modification

Role of sodium ions in the vitrification process: Glass matrix modification, slag structure depolymerization, and influence of metal immobilization, 774

Global Climate Change

Global climate change: The quantifiable sustainability challenge, 979

Grand Mare tunnel

Transverse approach between tunnel environment and corrosion: Particulate matter in the Grand Mare tunnel, 198

Granular Activated Carbon

Production of granular activated carbon from food-processing wastes (walnut shells and jujube seeds) and its adsorptive properties, 879

Graphene-TiO2

Photocatalytic reduction of carbon dioxide to methanol and formic acid by graphene-TiO2, 578

Greenhouse Gas Emissions

Estimating and comparing greenhouse gas emissions with their uncertainties using different methods: A case study for an energy supply utility, 1164

Ground-Based Methods

Comparative statistical study of hourly precipitation determined by radar-based Stage IV and ground-based methods in the North Central United States, 291

Hazardous Airborne Carbonyls

Evaluation of hazardous airborne carbonyls on a university campus in southern China, 903

Heavy Metal-Contaminated Soil

Effects of remediation train sequence on decontamination of heavy metal-contaminated soil containing mercury, 1013

Hexavalent Chromium

Trivalent chromium solubility and its influence on quantification of hexavalent chromium in ambient particulate matter using EPA method 6800, 1438

High-Strength Landfill Leachate

A comparative examination of MBR and SBR performance for the treatment of high-strength landfill leachate, 1073

Hoggery

Planning of methane emission control from hoggery using an inexact two-stage optimization model, 1140

Human Health Risks

Airborne polycyclic aromatic hydrocarbons in a medium-sized city affected by preharvest sugarcane burning and inhalation risk for human health, 1130

An integrated simulation and optimization approach for managing human health risks of atmospheric pollutants by coal-fired power plants, 704

Hybrid Biological Process

A hybrid biological process of indoor air treatment for toluene removal, 1402

Hydrochloric Acid

Laboratory testing of a continuous emissions monitor for hydrochloric acid, 670

Hydrogen Sulfide

Mobile measurement of methane and hydrogen sulfide at natural gas production site fence lines in the Texas Barnett Shale, 927

Hydrophobic VOCs

Treatment of hydrophobic VOCs in trickling bed air biofilter: Emphasis on long-term effect of initial alternate use of hydrophilic VOCs and microbial species evolution, 1102

Incineration Flue Gas

Simultaneous removal of sulfur dioxide and polycyclic aromatic hydrocarbons from incineration flue gas using activated carbon fibers, 1038

Indoor Air

Evaluating the capabilities of Aerosol-to-Liquid Particle Extraction System (ALPXS)/ICP-MS for monitoring trace metals in indoor air, 1028

Indoor Air Quality

Characterization of indoor air quality and resident health in an Arizona senior housing apartment building, 1251

Improving the indoor air quality of respiratory type of medical facility by zeolite filtering, 13

Installation of platform screen doors and their impact on indoor air quality: Seoul subway trains, 1054

Indoor Air Treatment

A hybrid biological process of indoor air treatment for toluene removal, 1402

Indoor Electric-Vaporizing Sources

Preparation of needle trap samplers to extract air compounds from indoor electric-vaporizing sources, 488

Indoor Pollution

Indoor pollution and burning practices in wood stove management, 1309

Industrial Flare

Computational fluid dynamics modeling of laboratory flames and an industrial flare, 1328

Infectious Bursal Disease Virus

Inactivation of airborne Enterococcus faecalis and infectious bursal disease virus using a pilot-scale ultraviolet photocatalytic oxidation scrubber, 38

Infrared Techniques

Assessment of nitrous oxide emission from cement plants: Real data measured with both Fourier transform infrared and nondispersive infrared techniques, 1270

Interprovincial Air Pollution Control

A model for interprovincial air pollution control based on futures prices, 552

Ionic Compositions

Major ionic compositions of fine particulate matter in an animal feeding operation facility and its vicinity, 1279

Ionic Dye Adsorption

Application of magnetically modified sewage sludge ash (SSA) in ionic dye adsorption, 141

Isotherm Models

Evaluation of different isotherm models, kinetic, thermodynamic, and copper biosorption efficiency of Lobaria pulmonaria (L.) Hoffm., 115

Laccase Production

Laccase production by Phomopsis liquidambari B3 cultured with food waste and wheat straw as the main nitrogen and carbon sources, 1154

Landfill Cover Soil

Modeling of methane oxidation in landfill cover soil using an artificial neural network, 150

Landfill Installation

Identifying problems for choosing suitable areas for installation of a new landfill through GIS technology: A case study, 80

Landfill Site Selection

A comprehensive study on landfill site selection for Kolkata City, India, 846

La2NiO4-Based Perovskite-Type Oxides

Direct N2O decomposition over La2NiO4-based perovskite-type oxides, 1260

Layer Breeding

Slightly acidic electrolyzed water for reducing airborne microorganisms in a layer breeding house, 494

Levoglucosan

Characterization and seasonal variations of levoglucosan in fine particulate matter in Xi’an, China, 1317

Light-Duty Gasoline Vehicles

Particulate matter speciation profiles for light-duty gasoline vehicles in the United States, 529

Light-Duty Vehicle Mobile Source Regulations

Evaluation of light-duty vehicle mobile source regulations on ozone concentration trends in 2018 and 2030 in the western and eastern United States, 175

Lobaria pulmonaria (L.)

Evaluation of different isotherm models, kinetic, thermodynamic, and copper biosorption efficiency of Lobaria pulmonaria (L.) Hoffm., 115

Marcellus Shale Natural Gas

Air pollutant emissions from the development, production, and processing of Marcellus Shale natural gas, 19

Mass Emission

Open burning and open detonation PM10 mass emission factor measurements with optical remote sensing, 227

Matrix Factorization

The accuracy of two- and three-way positive matrix factorization models: Applying simulated multisite data sets, 1122

Identification of the sources of PM10 in a subway tunnel using positive matrix factorization, 1360

MBR

A comparative examination of MBR and SBR performance for the treatment of high-strength landfill leachate, 1073

Mean Flow Velocity

An uncertainty analysis of mean flow velocity measurements used to quantify emissions from stationary sources, 679

Medical Facility

Improving the indoor air quality of respiratory type of medical facility by zeolite filtering, 13

Mercury

Effects of remediation train sequence on decontamination of heavy metal-contaminated soil containing mercury, 1013

Metal-Contaminated Soil

Effects of remediation train sequence on decontamination of heavy metal-contaminated soil containing mercury, 1013

Metal Immobilization

Role of sodium ions in the vitrification process: Glass matrix modification, slag structure depolymerization, and influence of metal immobilization, 774

Methane

Mobile measurement of methane and hydrogen sulfide at natural gas production site fence lines in the Texas Barnett Shale, 927

Methane Emission Control

Planning of methane emission control from hoggery using an inexact two-stage optimization model, 1140

Methane Oxidation

Modeling of methane oxidation in landfill cover soil using an artificial neural network, 150

Methanol

Photocatalytic reduction of carbon dioxide to methanol and formic acid by graphene-TiO2, 578

Microalgae-Based Ammonia

A laboratory study of microalgae-based ammonia gas mitigation with potential application for improving air quality in animal production operations, 330

Microbial Species Evolution

Treatment of hydrophobic VOCs in trickling bed air biofilter: Emphasis on long-term effect of initial alternate use of hydrophilic VOCs and microbial species evolution, 1102

Microenvironmental Ozone Concentrations

Measurement of microenvironmental ozone concentrations in Durham, North Carolina, using a 2B Technologies 205 Federal Equivalent Method monitor and an interference-free 2B Technologies 211 monitor, 360

MM5-CMAQ model

Process analysis of a regional air pollution episode over Pearl River Delta Region, China, using the MM5-CMAQ model, 406

Mobile Source Air Pollutants

Concentrations of mobile source air pollutants in urban microenvironments, 743

Modeled SO2 Concentrations

Combined analysis of modeled and monitored SO2 concentrations at a complex smelting facility, 272

Model Grid Resolution

Influence of model grid resolution on NO2 vertical column densities over East Asia, 436

Model-Predicted Concentrations

Probability analyses of combining background concentrations with model-predicted concentrations, 248

Monitored SO2 Concentrations

Combined analysis of modeled and monitored SO2 concentrations at a complex smelting facility, 272

Multiple Linear Regression Analysis

Improving the correlations of ambient tapered element oscillating microbalance PM2.5 data and SHARP 5030 Federal Equivalent Method in Ontario: A multiple linear regression analysis, 104

Multiple Train Stack Sampling Methods

Comparison of variability in dioxin and furan data acquired using single train and simultaneous multiple train stack sampling methods, 1093

Municipal Solid Waste

Classification and comparison of municipal solid waste based on thermochemical characteristics, 597

Siting a municipal solid waste disposal facility, Part II: The effects of external criteria on the final decision, 131

Municipal Waste

Characterization of municipal waste in Kampala, Uganda, 340

Na-A zeolite

Synthesis of high-purity Na-A and Na-X zeolite from coal fly ash, 586

National Ambient Air Quality Standards

An extended approach to calculate the ozone relative response factors used in the attainment demonstration for the National Ambient Air Quality Standards, 1204

Natural Acid Clays

Decomposition of organochlorine compounds in flue gas from municipal solid waste incinerators using natural and activated acid clays, 1021

Natural Gas

Air pollutant emissions from the development, production, and processing of Marcellus Shale natural gas, 19

Impact of emissions from natural gas production facilities on ambient air quality in the Barnett Shale area: A pilot study, 1368

Measurement of atmospheric pollutants associated with oil and natural gas exploration and production activity in Pennsylvania’s Allegheny National Forest, 1062

Mobile measurement of methane and hydrogen sulfide at natural gas production site fence lines in the Texas Barnett Shale, 927

Na-X zeolite

Synthesis of high-purity Na-A and Na-X zeolite from coal fly ash, 586

Needle Trap Samplers

Preparation of needle trap samplers to extract air compounds from indoor electric-vaporizing sources, 488

Nitrate

Sensitivity analyses of factors influencing CMAQ performance for fine particulate nitrate, 374

Nitrogen

Laccase production by Phomopsis liquidambari B3 cultured with food waste and wheat straw as the main nitrogen and carbon sources, 1154

Nitrous Acid

Sources of atmospheric nitrous acid: State of the science, current research needs, and future prospects, 1232

Nitrous Oxide

Assessment of nitrous oxide emission from cement plants: Real data measured with both Fourier transform infrared and nondispersive infrared techniques, 1270

Direct N2O decomposition over La2NiO4-based perovskite-type oxides, 1260

Effect of biochar on nitrous oxide emission and its potential mechanisms, 894

NO2

Influence of model grid resolution on NO2 vertical column densities over East Asia, 436

Nonmetallic Fractions

Encapsulation of nonmetallic fractions recovered from printed circuit boards waste with thermoplastic, 1085

Non-Methane Volatile Organic Compounds

Emission, speciation, and evaluation of impacts of non-methane volatile organic compounds from open dump site, 834

NOX

Evaluation of the SO2 and NOX offset ratio method to account for secondary PM2.5 formation, 265

Oil

Measurement of atmospheric pollutants associated with oil and natural gas exploration and production activity in Pennsylvania’s Allegheny National Forest, 1062

On-Road Vehicle Emissions

Trends in on-road vehicle emissions and ambient air quality in Atlanta, Georgia, USA, from the late 1990s through 2009, 808

Operating Parameters

Development of a chemical kinetic model for a biosolids fluidized-bed gasifier and the effects of operating parameters on syngas quality, 160

Optical Remote Sensing

Open burning and open detonation PM10 mass emission factor measurements with optical remote sensing, 227

Optimization Approach

An integrated simulation and optimization approach for managing human health risks of atmospheric pollutants by coal-fired power plants, 704

Organic Compounds

Nonvolatile, semivolatile, or volatile: Redefining volatile for volatile organic compounds, 661

Organochlorine Compounds

Decomposition of organochlorine compounds in flue gas from municipal solid waste incinerators using natural and activated acid clays, 1021

Outdoor Fine Particle Measurements

Outdoor fine and ultrafine particle measurements at six bus stops with smoking on two California arterial highways—Results of a pilot study, 47

Ozone

An extended approach to calculate the ozone relative response factors used in the attainment demonstration for the National Ambient Air Quality Standards, 1204

Annual and weekly patterns of ozone and particulate matter in Jeddah, Saudi Arabia, 817

Evaluation of light-duty vehicle mobile source regulations on ozone concentration trends in 2018 and 2030 in the western and eastern United States, 175

Future year ozone source attribution modeling studies for the eastern and western United States, 1174

Measurement of microenvironmental ozone concentrations in Durham, North Carolina, using a 2B Technologies 205 Federal Equivalent Method monitor and an interference-free 2B Technologies 211 monitor, 360

Particle Control

Heavy-duty, off-road diesel engine low-load particle number emissions and particle control, 1186

Particle Measurements

Outdoor fine and ultrafine particle measurements at six bus stops with smoking on two California arterial highways—Results of a pilot study, 47

Particle Size Distribution

Particle size distribution and its relationship to black carbon in two urban and one rural site in Santiago de Chile, 785

Particulate Matter

Public Health and Components of Particulate Matter: The Changing Assessment of Black Carbon, 617, 620, 1221

Phomopsis Liquidambari B3

Laccase production by Phomopsis liquidambari B3 cultured with food waste and wheat straw as the main nitrogen and carbon sources, 1154

Pilot-Scale Ultraviolet Photocatalytic Oxidation Scrubber

Inactivation of airborne Enterococcus faecalis and infectious bursal disease virus using a pilot-scale ultraviolet photocatalytic oxidation scrubber, 38

PM2.5

Evaluation of the SO2 and NOX offset ratio method to account for secondary PM2.5 formation, 265

PM2.5 concentrations in London for 2008–A modeling analysis of contributions from road traffic, 509

Sensitivity analysis of source regions to PM2.5 concentration at Fukue Island, Japan, 445

PM10

Contribution of dust storms to PM10 levels in an urban arid environment, 89

Identification of the sources of PM10 in a subway tunnel using positive matrix factorization, 1360

Low emission zones reduce PM10 mass concentrations and diesel soot in German cities, 481

Open burning and open detonation PM10 mass emission factor measurements with optical remote sensing, 227

PM10 concentration levels at an urban and background site in Cyprus: The impact of urban sources and dust storms, 1351

PM2.5 Chemical Speciation Monitoring Networks

United States National PM2.5 Chemical Speciation Monitoring Networks-CSN and IMPROVE: Description of Networks, 1409

PNNL

Comparison of stack measurement data from R&D facilities to regulatory criteria: A case study from PNNL, 235

Pollutants

An integrated simulation and optimization approach for managing human health risks of atmospheric pollutants by coal-fired power plants, 704

Childhood asthma acute primary care visits, traffic, and traffic-related pollutants, 561

Measurement of atmospheric pollutants associated with oil and natural gas exploration and production activity in Pennsylvania’s Allegheny National Forest, 1062

Pollution Control

A model for interprovincial air pollution control based on futures prices, 552

Polycyclic Aromatic Hydrocarbons (PAHs)

Migration of polycyclic aromatic hydrocarbons (PAHs) in urban treatment sludge to the air during PAH removal applications, 568

Polyethylene

Effect of low-density polyethylene on smoke emissions from burning of simulated debris piles, 690

Positive Matrix Factorization

Identification of the sources of PM10 in a subway tunnel using positive matrix factorization, 1360

Prairie Grass Data Set

Statistical evaluation of a new air dispersion model against AERMOD using the Prairie Grass data set, 219

Primary Particulate Matter

Analysis and discussion on formation and control of primary particulate matter generated from coal-fired power plants, 1341

Printed Circuit Boards Waste

Encapsulation of nonmetallic fractions recovered from printed circuit boards waste with thermoplastic, 1085

Probability Analyses

Probability analyses of combining background concentrations with model-predicted concentrations, 248

Pseudevernia furfuracea (L.)

Biosorption properties of zinc(II) from aqueous solutions by Pseudevernia furfuracea (L.) Zopf, 1112

Public Health

Public Health and Components of Particulate Matter: The Changing Assessment of Black Carbon, 617, 620, 1221

Quartz Sand

Carbon dioxide adsorption on amine-impregnated mesoporous materials prepared from spent quartz sand, 827

R&D Facilities

Comparison of stack measurement data from R&D facilities to regulatory criteria: A case study from PNNL, 235

Recycled Photovoltaic Modules

Recovering valuable metals from recycled photovoltaic modules, 797

Recycling Research

Recycling research on spent fluorescent lamps on the basis of extended producer responsibility in China, 1299

Regional Air Pollution

Process analysis of a regional air pollution episode over Pearl River Delta Region, China, using the MM5-CMAQ model, 406

Regional Carbonaceous Aerosols

Urban impacts on regional carbonaceous aerosols: Case study in central Texas, 917

Road Traffic

PM2.5 concentrations in London for 2008–A modeling analysis of contributions from road traffic, 509

Rural Community

Particulate matter sources on an hourly timescale in a rural community during the winter, 501

Salinity

Improvement of salinity in sewage sludge compost prior to its utilization as nursery substrate, 546

SBR

A comparative examination of MBR and SBR performance for the treatment of high-strength landfill leachate, 1073

Sensitivity Analysis

Sensitivity analyses of factors influencing CMAQ performance for fine particulate nitrate, 374

Sensitivity analysis of source regions to PM2.5 concentration at Fukue Island, Japan, 445

Seoul Subway Trains

Installation of platform screen doors and their impact on indoor air quality: Seoul subway trains, 1054

Sewage

Improvement of salinity in sewage sludge compost prior to its utilization as nursery substrate, 546

Thermal conductivity characteristics of dewatered sewage sludge by thermal hydrolysis reaction, 1383

Sewage Sludge Ash (SSA)

Application of magnetically modified sewage sludge ash (SSA) in ionic dye adsorption, 141

Shale Gas Development and Production

An exploratory study of air emissions associated with shale gas development and production in the Barnett Shale, 61

SHARP 5030 Federal Equivalent Method in Ontario

Improving the correlations of ambient tapered element oscillating microbalance PM2.5 data and SHARP 5030 Federal Equivalent Method in Ontario: A multiple linear regression analysis, 104

Simulation Approach

An integrated simulation and optimization approach for managing human health risks of atmospheric pollutants by coal-fired power plants, 704

Slag Structure Depolymerization

Role of sodium ions in the vitrification process: Glass matrix modification, slag structure depolymerization, and influence of metal immobilization, 774

Smoke Emissions

Effect of low-density polyethylene on smoke emissions from burning of simulated debris piles, 690

SO2

Combined analysis of modeled and monitored SO2 concentrations at a complex smelting facility, 272

Evaluation of the SO2 and NOX offset ratio method to account for secondary PM2.5 formation, 265

Sodium Ions

Role of sodium ions in the vitrification process: Glass matrix modification, slag structure depolymerization, and influence of metal immobilization, 774

Soil

Effects of remediation train sequence on decontamination of heavy metal-contaminated soil containing mercury, 1013

Solid Waste

Classification and comparison of municipal solid waste based on thermochemical characteristics, 597

Decomposition of organochlorine compounds in flue gas from municipal solid waste incinerators using natural and activated acid clays, 1021

Siting a municipal solid waste disposal facility, Part II: The effects of external criteria on the final decision, 131

Space-Time Analysis

Space-time analysis of the Air Quality Model Evaluation International Initiative (AQMEII) Phase 1 air quality simulations, 388

Stabilization/Solidification Technologies

Immobilization of antimony waste slag by applying geopolymerization and stabilization/solidification technologies, 1288

Stack Measurement Data

Comparison of stack measurement data from R&D facilities to regulatory criteria: A case study from PNNL, 235

Sub-Grid-Scale Plume Treatment

Implementation and application of sub-grid-scale plume treatment in the latest version of EPA’s third-generation air quality model, CMAQ 5.01, 453

Sulfur Dioxide

Simultaneous removal of sulfur dioxide and polycyclic aromatic hydrocarbons from incineration flue gas using activated carbon fibers, 1038

Syngas Quality

Development of a chemical kinetic model for a biosolids fluidized-bed gasifier and the effects of operating parameters on syngas quality, 160

Thermal Conductivity

Thermal conductivity characteristics of dewatered sewage sludge by thermal hydrolysis reaction, 1383

Thermal Efficiency

Effects of water-emulsified fuel on a diesel engine generator’s thermal efficiency and exhaust, 970

Thermal Hydrolysis Reaction

Thermal conductivity characteristics of dewatered sewage sludge by thermal hydrolysis reaction, 1383

Time-Resolved Atmospheric Conditions

Investigation of time-resolved atmospheric conditions and indoor/outdoor particulate matter concentrations in homes with gas and biomass cook stoves in Nogales, Sonora, Mexico, 759

TiO2 Nonwoven Filter

Study on particulates and volatile organic compounds removal with TiO2 nonwoven filter prepared by electrospinning, 738

Tobacco Smoke Exposure

Outdoor tobacco smoke exposure at the perimeter of a tobacco-free university, 863

Toluene Removal

A hybrid biological process of indoor air treatment for toluene removal, 1402

Trace Elements Behavior

Understanding selected trace elements behavior in a coal-fired power plant in Malaysia for assessment of abatement technologies, 867

Trace Metals

Evaluating the capabilities of Aerosol-to-Liquid Particle Extraction System (ALPXS)/ICP-MS for monitoring trace metals in indoor air, 1028

Traffic-Related Pollutants

Childhood asthma acute primary care visits, traffic, and traffic-related pollutants, 561

Transverse Approach

Transverse approach between tunnel environment and corrosion: Particulate matter in the Grand Mare tunnel, 198

Trivalent Chromium Solubility

Trivalent chromium solubility and its influence on quantification of hexavalent chromium in ambient particulate matter using EPA method 6800, 1438

Turbulence Assumptions

Minimum turbulence assumptions and u* and L estimation for dispersion models during low-wind stable conditions, 309

2B Technologies

Measurement of microenvironmental ozone concentrations in Durham, North Carolina, using a 2B Technologies 205 Federal Equivalent Method monitor and an interference-free 2B Technologies 211 monitor, 360

Two-Stage Optimization Model

Planning of methane emission control from hoggery using an inexact two-stage optimization model, 1140

Ultrafine Particle Measurements

Outdoor fine and ultrafine particle measurements at six bus stops with smoking on two California arterial highways—Results of a pilot study, 47

Ultrafine Particles

Preparation of electrospun polyurethane filter media and their collection mechanisms for ultrafine particles, 322

Urban Arid Environment

Contribution of dust storms to PM10 levels in an urban arid environment, 89

Urban Impacts

Urban impacts on regional carbonaceous aerosols: Case study in central Texas, 917

Urban Microenvironments

Concentrations of mobile source air pollutants in urban microenvironments, 743

Urban Roadway

Characterizing and predicting coarse and fine particulates in classrooms located close to an urban roadway, 945

Urban Sources

PM10 concentration levels at an urban and background site in Cyprus: The impact of urban sources and dust storms, 1351

Urban Treatment

Migration of polycyclic aromatic hydrocarbons (PAHs) in urban treatment sludge to the air during PAH removal applications, 568

Vaporizing Sources

Preparation of needle trap samplers to extract air compounds from indoor electric-vaporizing sources, 488

Vehicle Emissions

Trends in on-road vehicle emissions and ambient air quality in Atlanta, Georgia, USA, from the late 1990s through 2009, 808

Vehicles

Particulate matter speciation profiles for light-duty gasoline vehicles in the United States, 529

Volatile Organic Compounds (VOC)

Analysis of mobile source air toxics (MSATs)—Near-road VOC and carbonyl concentrations, 349

Diffusion-controlled toluene reference material for VOC emissions testing: International interlaboratory study, 468

Emission, speciation, and evaluation of impacts of non-methane volatile organic compounds from open dump site, 834

Nonvolatile, semivolatile, or volatile: Redefining volatile for volatile organic compounds, 661

Study on particulates and volatile organic compounds removal with TiO2 nonwoven filter prepared by electrospinning, 738

Treatment of hydrophobic VOCs in trickling bed air biofilter: Emphasis on long-term effect of initial alternate use of hydrophilic VOCs and microbial species evolution, 1102

Waste Disposal Facility

Siting a municipal solid waste disposal facility, Part II: The effects of external criteria on the final decision, 131

Wastes

An effective utilization of the slag from acid leaching of coal-waste: Preparation of water glass with a low-temperature co-melting reaction, 887

Classification and comparison of municipal solid waste based on thermochemical characteristics, 597

Encapsulation of nonmetallic fractions recovered from printed circuit boards waste with thermoplastic, 1085

Immobilization of antimony waste slag by applying geopolymerization and stabilization/solidification technologies, 1288

Laccase production by Phomopsis liquidambari B3 cultured with food waste and wheat straw as the main nitrogen and carbon sources, 1154

Production of granular activated carbon from food-processing wastes (walnut shells and jujube seeds) and its adsorptive properties, 879

Water

Changes in weather and climate extremes: State of knowledge relevant to air and water quality in the United States, 184

Slightly acidic electrolyzed water for reducing airborne microorganisms in a layer breeding house, 494

Water-Emulsified Fuel

Effects of water-emulsified fuel on a diesel engine generator’s thermal efficiency and exhaust, 970

Weather

Changes in weather and climate extremes: State of knowledge relevant to air and water quality in the United States, 184

Wind

Minimum turbulence assumptions and u* and L estimation for dispersion models during low-wind stable conditions, 309

Wood Stove Management

Indoor pollution and burning practices in wood stove management, 1309

Zeolite Filtering

Improving the indoor air quality of respiratory type of medical facility by zeolite filtering, 13

Zinc(II)

Biosorption properties of zinc(II) from aqueous solutions by Pseudevernia furfuracea (L.) Zopf, 1112

Zinc Concentrate Direct Leaching

Recovery of elemental sulfur from zinc concentrate direct leaching residue using atmospheric distillation: A pilot-scale experimental study, 95

Author Index

Aarnink, A.J.A.

Inactivation of airborne Enterococcus faecalis and infectious bursal disease virus using a pilot-scale ultraviolet photocatalytic oxidation scrubber, 38

Abushammala, M.F.M.

Modeling of methane oxidation in landfill cover soil using an artificial neural network, 150

Acevedo-Bolton, V.

Outdoor fine and ultrafine particle measurements at six bus stops with smoking on two California arterial highways—Results of a pilot study, 47

Achilleos, S.

PM10 concentration levels at an urban and background site in Cyprus: The impact of urban sources and dust storms, 1351

Adams, P.J.

Air pollutant emissions from the development, production, and processing of Marcellus Shale natural gas, 19

Ahrentzen, S.

Characterization of indoor air quality and resident health in an Arizona senior housing apartment building, 1251

Akolkar, A.B.

Emission, speciation, and evaluation of impacts of non-methane volatile organic compounds from open dump site, 834

Al-Khalaf, A.K.

Annual and weekly patterns of ozone and particulate matter in Jeddah, Saudi Arabia, 817

Al-Sahafi, M.S.

Annual and weekly patterns of ozone and particulate matter in Jeddah, Saudi Arabia, 817

Almazroui, M.

Annual and weekly patterns of ozone and particulate matter in Jeddah, Saudi Arabia, 817

Ameur-Boudabbous, I.

Transverse approach between tunnel environment and corrosion: Particulate matter in the Grand Mare tunnel, 198

Ancelet, T.

Particulate matter sources on an hourly timescale in a rural community during the winter, 501

Anderson, J.J.

Evaluation of the SO2 and NOX offset ratio method to account for secondary PM2.5 formation, 265

Annett, M.A.

Combined analysis of modeled and monitored SO2 concentrations at a complex smelting facility, 272

Aras, S.

Biosorption properties of zinc(II) from aqueous solutions by Pseudevernia furfuracea (L.) Zopf, 1112

Evaluation of different isotherm models, kinetic, thermodynamic, and copper biosorption efficiency of Lobaria pulmonaria (L.) Hoffm., 115

Armani, F.A.S

Statistical evaluation of a new air dispersion model against AERMOD using the Prairie Grass data set, 219

Arnott, W.P.

Concentrations of mobile source air pollutants in urban microenvironments, 743

Arrington, C.R.

Comparative statistical study of hourly precipitation determined by radar-based Stage IV and ground-based methods in the North Central United States, 291

Atakol, O.

Biosorption properties of zinc(II) from aqueous solutions by Pseudevernia furfuracea (L.) Zopf, 1112

Evaluation of different isotherm models, kinetic, thermodynamic, and copper biosorption efficiency of Lobaria pulmonaria (L.) Hoffm., 115

Avise, J.C.

An extended approach to calculate the ozone relative response factors used in the attainment demonstration for the National Ambient Air Quality Standards, 1204

Bae, W.

Production of granular activated carbon from food-processing wastes (walnut shells and jujube seeds) and its adsorptive properties, 879

Baldauf, R.W.

Analysis of mobile source air toxics (MSATs)—Near-road VOC and carbonyl concentrations, 349

Particulate matter speciation profiles for light-duty gasoline vehicles in the United States, 529

Ballinger, M.Y.

Comparison of stack measurement data from R&D facilities to regulatory criteria: A case study from PNNL, 235

Bambha, R.P.

Toward verifying fossil fuel CO2 emissions with the CMAQ model: Motivation, model description and initial simulation, 419

Banadda, N.E.

Characterization of municipal waste in Kampala, Uganda, 340

Barbier, A.

Transverse approach between tunnel environment and corrosion: Particulate matter in the Grand Mare tunnel, 198

Barona, A.

A hybrid biological process of indoor air treatment for toluene removal, 1402

Barrett, T.E.

Urban impacts on regional carbonaceous aerosols: Case study in central Texas, 917

Basri, N.E.A.

Modeling of methane oxidation in landfill cover soil using an artificial neural network, 150

Benedetti, P.

Assessment of nitrous oxide emission from cement plants: Real data measured with both Fourier transform infrared and nondispersive infrared techniques, 1270

Bitzos, M.M.

Improving the correlations of ambient tapered element oscillating microbalance PM2.5 data and SHARP 5030 Federal Equivalent Method in Ontario: A multiple linear regression analysis, 104

Bloomfield, P.

Major ionic compositions of fine particulate matter in an animal feeding operation facility and its vicinity, 1279

Boylan, J.

Toward verifying fossil fuel CO2 emissions with the CMAQ model: Motivation, model description and initial simulation, 419

Bratset, H.

Outdoor tobacco smoke exposure at the perimeter of a tobacco-free university, 863

Brown, S.G.

Changes in air quality at near-roadway schools after a major freeway expansion in Las Vegas, Nevada, 1003

Bruzzone, M.

Indoor pollution and burning practices in wood stove management, 1309

Bryant, R.

An uncertainty analysis of mean flow velocity measurements used to quantify emissions from stationary sources, 679

Bumiller, K.

Laboratory testing of a continuous emissions monitor for hydrochloric acid, 670

Bundy, M.

An uncertainty analysis of mean flow velocity measurements used to quantify emissions from stationary sources, 679

Butenhoff, C.L.

Annual and weekly patterns of ozone and particulate matter in Jeddah, Saudi Arabia, 817

Cai, H.

Improvement of salinity in sewage sludge compost prior to its utilization as nursery substrate, 546

Cai, X.H.

An integrated simulation and optimization approach for managing human health risks of atmospheric pollutants by coal-fired power plants, 704

Cai, Y.P.

An integrated simulation and optimization approach for managing human health risks of atmospheric pollutants by coal-fired power plants, 704

Cairney, P.

Development of a chemical kinetic model for a biosolids fluidized-bed gasifier and the effects of operating parameters on syngas quality, 160

Campbell, D.

Impact of emissions from natural gas production facilities on ambient air quality in the Barnett Shale area: A pilot study, 1368

Campbell, D.E.

Concentrations of mobile source air pollutants in urban microenvironments, 743

Campeau, M.A.

Combined analysis of modeled and monitored SO2 concentrations at a complex smelting facility, 272

Cansaran-Duman, D.

Biosorption properties of zinc(II) from aqueous solutions by Pseudevernia furfuracea (L.) Zopf, 1112

Evaluation of different isotherm models, kinetic, thermodynamic, and copper biosorption efficiency of Lobaria pulmonaria (L.) Hoffm., 115

Cao J.-J.

Characterization and seasonal variations of levoglucosan in fine particulate matter in Xi’an, China, 1317

Cao, J.

Evaluation of hazardous airborne carbonyls on a university campus in southern China, 903

Cao, W.

Slightly acidic electrolyzed water for reducing airborne microorganisms in a layer breeding house, 494

Cao, X.

Effect of biochar on nitrous oxide emission and its potential mechanisms, 894

Capel, J.

Measurement of microenvironmental ozone concentrations in Durham, North Carolina, using a 2B Technologies 205 Federal Equivalent Method monitor and an interference-free 2B Technologies 211 monitor, 360

Catizone, P.A.

Comparative statistical study of hourly precipitation determined by radar-based Stage IV and ground-based methods in the North Central United States, 291

Çelikkol, P.

Evaluation of different isotherm models, kinetic, thermodynamic, and copper biosorption efficiency of Lobaria pulmonaria (L.) Hoffm., 115

Ceppi, M.

Indoor pollution and burning practices in wood stove management, 1309

Chakraborty, S.

Emission, speciation, and evaluation of impacts of non-methane volatile organic compounds from open dump site, 834

Champion, W.M.

Development of a chemical kinetic model for a biosolids fluidized-bed gasifier and the effects of operating parameters on syngas quality, 160

Chan, C.S.

Evaluation of hazardous airborne carbonyls on a university campus in southern China, 903

Chan, P.-w.

Process analysis of a regional air pollution episode over Pearl River Delta Region, China, using the MM5-CMAQ model, 406

Chandler, A.J.

Comparison of variability in dioxin and furan data acquired using single train and simultaneous multiple train stack sampling methods, 1093

Chang, C.-T.

Carbon dioxide adsorption on amine-impregnated mesoporous materials prepared from spent quartz sand, 827

Photocatalytic reduction of carbon dioxide to methanol and formic acid by graphene-TiO2, 578

Recycling research on spent fluorescent lamps on the basis of extended producer responsibility in China, 1299

Study on particulates and volatile organic compounds removal with TiO2 nonwoven filter prepared by electrospinning, 738

Chang, M.B.

Direct N2O decomposition over La2NiO4-based perovskite-type oxides, 1260

Chang, Y.-M.

Effects of water-emulsified fuel on a diesel engine generator’s thermal efficiency and exhaust, 970

Chang, Y.-Y

Effects of water-emulsified fuel on a diesel engine generator’s thermal efficiency and exhaust, 970

Chatani, S.

Sensitivity analyses of factors influencing CMAQ performance for fine particulate nitrate, 374

Chau, D.

An extended approach to calculate the ozone relative response factors used in the attainment demonstration for the National Ambient Air Quality Standards, 1204

Chen, C.-C.

Effects of water-emulsified fuel on a diesel engine generator’s thermal efficiency and exhaust, 970

Chen, D.H.

Computational fluid dynamics modeling of laboratory flames and an industrial flare, 1328

Chen, J.-C.

Planning of methane emission control from hoggery using an inexact two-stage optimization model, 1140

Chen, P.

Effect of biochar on nitrous oxide emission and its potential mechanisms, 894

Chen, R.

An effective utilization of the slag from acid leaching of coal-waste: Preparation of water glass with a low-temperature co-melting reaction, 887

Modeled and observed fine particulate matter reductions from state attainment demonstrations, 995

Chen, T.-b.

Improvement of salinity in sewage sludge compost prior to its utilization as nursery substrate, 546

Chen, W.-H.

Planning of methane emission control from hoggery using an inexact two-stage optimization model, 1140

Cheng, F.

An effective utilization of the slag from acid leaching of coal-waste: Preparation of water glass with a low-temperature co-melting reaction, 887

Cheng, K.-C.

Outdoor fine and ultrafine particle measurements at six bus stops with smoking on two California arterial highways—Results of a pilot study, 47

Cheng, W.-H.

Preparation of needle trap samplers to extract air compounds from indoor electric-vaporizing sources, 488

Chenier, M.

Evaluating the capabilities of Aerosol-to-Liquid Particle Extraction System (ALPXS)/ICP-MS for monitoring trace metals in indoor air, 1028

Chithra, V.S.

Characterizing and predicting coarse and fine particulates in classrooms located close to an urban roadway, 945

Cho, H.

Outdoor tobacco smoke exposure at the perimeter of a tobacco-free university, 863

Cho, K.

Identification of the sources of PM10 in a subway tunnel using positive matrix factorization, 1360

Choi, H.-J.

Preparation of electrospun polyurethane filter media and their collection mechanisms for ultrafine particles, 322

Choi, Y.

Estimating and comparing greenhouse gas emissions with their uncertainties using different methods: A case study for an energy supply utility, 1164

Chow, J.C.

Characterization and seasonal variations of levoglucosan in fine particulate matter in Xi’an, China, 1317

Public health and components of particulate matter: The changing assessment of black carbon, 617

Public health and components of particulate matter: The changing assessment of black carbon, 1221

Chowdhury, B.

Minimum turbulence assumptions and u* and L estimation for dispersion models during low-wind stable conditions, 309

Chowdhury, M.

Emission, speciation, and evaluation of impacts of non-methane volatile organic compounds from open dump site, 834

Chuang, Y.-H.

Study on particulates and volatile organic compounds removal with TiO2 nonwoven filter prepared by electrospinning, 738

Chung, J.

Production of granular activated carbon from food-processing wastes (walnut shells and jujube seeds) and its adsorptive properties, 879

Cindoruk, S.S.

Migration of polycyclic aromatic hydrocarbons (PAHs) in urban treatment sludge to the air during PAH removal applications, 568

Cipolla, M.

Indoor pollution and burning practices in wood stove management, 1309

Cocker, D.R.

Effect of low-density polyethylene on smoke emissions from burning of simulated debris piles, 690

Cohan, D.S.

Modeled and observed fine particulate matter reductions from state attainment demonstrations, 995

Cohn, S.

Characterization of indoor air quality and resident health in an Arizona senior housing apartment building, 1251

Collet, S.

Evaluation of light-duty vehicle mobile source regulations on ozone concentration trends in 2018 and 2030 in the western and eastern United States, 175

Future year ozone source attribution modeling studies for the eastern and western United States, 1174

Cooper, C.D.

Development of a chemical kinetic model for a biosolids fluidized-bed gasifier and the effects of operating parameters on syngas quality, 160

Cotsman, D.J.

Combined analysis of modeled and monitored SO2 concentrations at a complex smelting facility, 272

Cox, S.

Diffusion-controlled toluene reference material for VOC emissions testing: International interlaboratory study, 468

Crabbe, K.

Laboratory testing of a continuous emissions monitor for hydrochloric acid, 670

Cropper, P.M.

Composition and secondary formation of fine particulate matter in the Salt Lake Valley: Winter 2009, 957

Cruickshank, T.

Composition and secondary formation of fine particulate matter in the Salt Lake Valley: Winter 2009, 957

Crumpler, D.

United States National PM2.5 Chemical Speciation Monitoring Networks—CSN and IMPROVE: Description of Networks, 1409

Cyrys, J.

Low emission zones reduce PM10 mass concentrations and diesel soot in German cities, 481

da Costa Dias, N.L.

Statistical evaluation of a new air dispersion model against AERMOD using the Prairie Grass data set, 219

Dai, C.

An integrated simulation and optimization approach for managing human health risks of atmospheric pollutants by coal-fired power plants, 704

Dai, C.-C.

Laccase production by Phomopsis liquidambari B3 cultured with food waste and wheat straw as the main nitrogen and carbon sources, 1154

Dai, W.T.

Evaluation of hazardous airborne carbonyls on a university campus in southern China, 903

DaMassa, J.A.

An extended approach to calculate the ozone relative response factors used in the attainment demonstration for the National Ambient Air Quality Standards, 1204

Davis, J.

Comparison of variability in dioxin and furan data acquired using single train and simultaneous multiple train stack sampling methods, 1093

Davy, P.K.

Particulate matter sources on an hourly timescale in a rural community during the winter, 501

de Almeida, R.C.

Statistical evaluation of a new air dispersion model against AERMOD using the Prairie Grass data set, 219

de Assuncao, J.V.

Airborne polycyclic aromatic hydrocarbons in a medium-sized city affected by preharvest sugarcane burning and inhalation risk for human health, 1130

de Fatima Andrade, M.

Analysis of atmospheric aerosol (PM2.5) in Recife city, Brazil, 519

DenBleyker, A.

Future year ozone source attribution modeling studies for the eastern and western United States, 1174

Trends in on-road vehicle emissions and ambient air quality in Atlanta, Georgia, USA, from the late 1990s through 2009, 808

Dene, C.

Laboratory testing of a continuous emissions monitor for hydrochloric acid, 670

Destaillats, H.

Characterization of indoor air quality and resident health in an Arizona senior housing apartment building, 1251

DeWinter, J.L.

Changes in air quality at near-roadway schools after a major freeway expansion in Las Vegas, Nevada, 1003

dos Santos, L.H.M.

Analysis of atmospheric aerosol (PM2.5) in Recife city, Brazil, 519

Duan, X.

An effective utilization of the slag from acid leaching of coal-waste: Preparation of water glass with a low-temperature co-melting reaction, 887

Duchsherer, C.J.

Comparison of stack measurement data from R&D facilities to regulatory criteria: A case study from PNNL, 235

Durbin, T.D.

Laboratory testing of a continuous emissions monitor for hydrochloric acid, 670

Dutta, A.

A comprehensive study on landfill site selection for Kolkata City, India, 846

Eapi, G.R.

Mobile measurement of methane and hydrogen sulfide at natural gas production site fence lines in the Texas Barnett Shale, 927

Eatough, D.J.

Composition and secondary formation of fine particulate matter in the Salt Lake Valley: Winter 2009, 957

Eklund, A.G.

Public health and components of particulate matter: The changing assessment of black carbon, 617

Public health and components of particulate matter: The changing assessment of black carbon, 1221

El-Fadel, M.

A comparative examination of MBR and SBR performance for the treatment of high-strength landfill leachate, 1073

Elfithri, R.

Modeling of methane oxidation in landfill cover soil using an artificial neural network, 150

Elias, A.

A hybrid biological process of indoor air treatment for toluene removal, 1402

Emregul, E.

Biosorption properties of zinc(II) from aqueous solutions by Pseudevernia furfuracea (L.) Zopf, 1112

Evaluation of different isotherm models, kinetic, thermodynamic, and copper biosorption efficiency of Lobaria pulmonaria (L.) Hoffm., 115

Evans, J.S.

PM10 concentration levels at an urban and background site in Cyprus: The impact of urban sources and dust storms, 1351

Fan, Q.

Process analysis of a regional air pollution episode over Pearl River Delta Region, China, using the MM5-CMAQ model, 406

Fan, S.

Process analysis of a regional air pollution episode over Pearl River Delta Region, China, using the MM5-CMAQ model, 406

Fan, Z.(T.)

Trivalent chromium solubility and its influence on quantification of hexavalent chromium in ambient particulate matter using EPA method 6800, 1438

Fang, L.

An effective utilization of the slag from acid leaching of coal-waste: Preparation of water glass with a low-temperature co-melting reaction, 887

Feng, Y.

Process analysis of a regional air pollution episode over Pearl River Delta Region, China, using the MM5-CMAQ model, 406

Feng, Y.-C.

The accuracy of two- and three-way positive matrix factorization models: Applying simulated multisite data sets, 1122

Flanagan, J.B.

United States National PM2.5 Chemical Speciation Monitoring Networks—CSN and IMPROVE: Description of networks, 1409

Francisco, A.P.

Airborne polycyclic aromatic hydrocarbons in a medium-sized city affected by preharvest sugarcane burning and inhalation risk for human health, 1130

Fraser, M.P.

Characterization of indoor air quality and resident health in an Arizona senior housing apartment building, 1251

Frey, S.E.

Characterization of indoor air quality and resident health in an Arizona senior housing apartment building, 1251

Friger, M.D.

Contribution of dust storms to PM10 levels in an urban arid environment, 89

Frost, K.D.

AERMOD performance evaluation for three coal-fired electrical generating units in Southwest Indiana, 280

Fu, L.

A two-step approach for relating tapered element oscillating microbalance and dichotomous air sampler PM2.5 measurements, 1195

Fujita, E.M.

Concentrations of mobile source air pollutants in urban microenvironments, 743

Fulper, C.R.

Particulate matter speciation profiles for light-duty gasoline vehicles in the United States, 529

Galmarini, S.

Space-time analysis of the Air Quality Model Evaluation International Initiative (AQMEII) Phase 1 air quality simulations, 388

Gangadharan, P.

Computational fluid dynamics modeling of laboratory flames and an industrial flare, 1328

Gao, D.

Improvement of salinity in sewage sludge compost prior to its utilization as nursery substrate, 546

Gao, H.O.

A model for interprovincial air pollution control based on futures prices, 552

Gardner, H.D.

Evaluating the capabilities of Aerosol-to-Liquid Particle Extraction System (ALPXS)/ICP-MS for monitoring trace metals in indoor air, 1028

Ge, L.

Slightly acidic electrolyzed water for reducing airborne microorganisms in a layer breeding house, 494

Gebresenbet, G.

Characterization of municipal waste in Kampala, Uganda, 340

Grahame, T.J.

Public health and components of particulate matter: The changing assessment of black carbon, 620

Gramsch, E.

Particle size distribution and its relationship to black carbon in two urban and one rural site in Santiago de Chile, 785

Greenbaum, D.S.

Public health and components of particulate matter: The changing assessment of black carbon, 1221

Greenfield, M.M.

Combined analysis of modeled and monitored SO2 concentrations at a complex smelting facility, 272

Grover, J.P.

An exploratory study of air emissions associated with shale gas development and production in the Barnett Shale, 61

Guerra, S.A.

Evaluation of the SO2 and NOX offset ratio method to account for secondary PM2.5 formation, 265

Guerriero, E.

Assessment of nitrous oxide emission from cement plants: Real data measured with both Fourier transform infrared and nondispersive infrared techniques, 1270

Guo, H.C.

An integrated simulation and optimization approach for managing human health risks of atmospheric pollutants by coal-fired power plants, 704

Hahn, E.J.

Outdoor tobacco smoke exposure at the perimeter of a tobacco-free university, 863

Han, B.

The accuracy of two- and three-way positive matrix factorization models: Applying simulated multisite data sets, 1122

Han, S.K.

Thermal conductivity characteristics of dewatered sewage sludge by thermal hydrolysis reaction, 1383

Han, Y.-M.

Characterization and seasonal variations of levoglucosan in fine particulate matter in Xi’an, China, 1317

Hanna, A.F.

Introduction to a special grouping of papers from the 2012 Community Modeling and Analysis System (CMAS) Conference, 373

Hanna, S.R.

Minimum turbulence assumptions and u* and L estimation for dispersion models during low-wind stable conditions, 309

Hannoyer, B.

Transverse approach between tunnel environment and corrosion: Particulate matter in the Grand Mare tunnel, 198

Hansen, J.C.

Composition and secondary formation of fine particulate matter in the Salt Lake Valley: Winter 2009, 957

Hao, X.

Slightly acidic electrolyzed water for reducing airborne microorganisms in a layer breeding house, 494

Happonen, M.

Heavy-duty, off-road diesel engine low-load particle number emissions and particle control, 1186

Hara, K.

Difference in concentration trends of airborne particulate matter during rush hour on weekdays and Sundays in Tokyo, Japan, 1045

Hashisho, J.

A comparative examination of MBR and SBR performance for the treatment of high-strength landfill leachate, 1073

Hassan, A.

Encapsulation of nonmetallic fractions recovered from printed circuit boards waste with thermoplastic, 1085

Hassim, M.H.

Understanding selected trace elements behavior in a coal-fired power plant in Malaysia for assessment of abatement technologies, 867

Hayami, H.

Sensitivity analyses of factors influencing CMAQ performance for fine particulate nitrate, 374

Heinold, D.

Emissions Variability Processor (EMVAP): Design, evaluation, and application, 1389

Hidy, G.M.

Public health and components of particulate matter: The changing assessment of black carbon, 617

Public health and components of particulate matter: The changing assessment of black carbon, 1221

Hildemann, L.M.

Outdoor fine and ultrafine particle measurements at six bus stops with smoking on two California arterial highways—Results of a pilot study, 47

Ho, K.F.

Characterization and seasonal variations of levoglucosan in fine particulate matter in Xi’an, China, 1317

Evaluation of hazardous airborne carbonyls on a university campus in southern China, 903

Ho, L.B.

Evaluation of hazardous airborne carbonyls on a university campus in southern China, 903

Ho, S.S.H.

Characterization and seasonal variations of levoglucosan in fine particulate matter in Xi’an, China, 1317

Evaluation of hazardous airborne carbonyls on a university campus in southern China, 903

Hoffnagle, G.F.

Introduction to a special grouping of papers from the 2013 A&WMA International Specialty Conference, Guideline on Air Quality Models: The Path Forward, 247

Hogrefe, C.

Space-time analysis of the Air Quality Model Evaluation International Initiative (AQMEII) Phase 1 air quality simulations, 388

Holmes, H.A.

Investigation of time-resolved atmospheric conditions and indoor/outdoor particulate matter concentrations in homes with gas and biomass cook stoves in Nogales, Sonora, Mexico, 759

Homma, J.

Difference in concentration trends of airborne particulate matter during rush hour on weekdays and Sundays in Tokyo, Japan, 1045

Hong, G.-B.

Carbon dioxide adsorption on amine-impregnated mesoporous materials prepared from spent quartz sand, 827

Study on particulates and volatile organic compounds removal with TiO2 nonwoven filter prepared by electrospinning, 738

Hong, S.K.

Recovering valuable metals from recycled photovoltaic modules, 797

Hopke, P.K.

Trivalent chromium solubility and its influence on quantification of hexavalent chromium in ambient particulate matter using EPA method 6800, 1438

Horng, J.-J.

Improving the indoor air quality of respiratory type of medical facility by zeolite filtering, 13

Hort, C.

A hybrid biological process of indoor air treatment for toluene removal, 1402

Hosseini, S.

Effect of low-density polyethylene on smoke emissions from burning of simulated debris piles, 690

Howard-Reed, C.

Diffusion-controlled toluene reference material for VOC emissions testing: International interlaboratory study, 468

Hseu, Z.-Y.

Effects of remediation train sequence on decontamination of heavy metal-contaminated soil containing mercury, 1013

Hsi, H.-C.

Effects of remediation train sequence on decontamination of heavy metal-contaminated soil containing mercury, 1013

Hsu, Y.-H.

Preparation of needle trap samplers to extract air compounds from indoor electric-vaporizing sources, 488

Hu, S.-C.

Application of magnetically modified sewage sludge ash (SSA) in ionic dye adsorption, 141

Hu, S.-H.

Application of magnetically modified sewage sludge ash (SSA) in ionic dye adsorption, 141

Huang R.

A model for interprovincial air pollution control based on futures prices, 552

Huang, G.H.

An integrated simulation and optimization approach for managing human health risks of atmospheric pollutants by coal-fired power plants, 704

Huang, L.

Trivalent chromium solubility and its influence on quantification of hexavalent chromium in ambient particulate matter using EPA method 6800, 1438

Huang, M.

Toward verifying fossil fuel CO2 emissions with the CMAQ model: Motivation, model description and initial simulation, 419

Huang, R.-J.

Characterization and seasonal variations of levoglucosan in fine particulate matter in Xi’an, China, 1317

Huang, Y.-T.

Effects of remediation train sequence on decontamination of heavy metal-contaminated soil containing mercury, 1013

Hung, M.-J.

Simultaneous removal of sulfur dioxide and polycyclic aromatic hydrocarbons from incineration flue gas using activated carbon fibers, 1038

Hwang, D.

Identification of the sources of PM10 in a subway tunnel using positive matrix factorization, 1360

Hwang, I.-H.

Decomposition of organochlorine compounds in flue gas frommunicipal solidwaste incinerators using natural and activated acid clays, 1021

Hwang, T.

Freight shipment modal split and its environmental impacts: An exploratory study, 2

Hwang, Y.

Outdoor tobacco smoke exposure at the perimeter of a tobacco-free university, 863

Ianniello, A.

Sources of atmospheric nitrous acid: State of the science, current research needs, and future prospects, 1232

Ikeda, K.

Influence of model grid resolution on NO2 vertical column densities over East Asia, 436

Sensitivity analysis of source regions to PM2.5 concentration at Fukue Island, Japan, 445

Inoue, M.

Difference in concentration trends of airborne particulate matter during rush hour on weekdays and Sundays in Tokyo, Japan, 1045

Ip, H.S.S.

Evaluation of hazardous airborne carbonyls on a university campus in southern China, 903

Irie, H.

Influence of model grid resolution on NO2 vertical column densities over East Asia, 436

Irwan, D.

Modeling of methane oxidation in landfill cover soil using an artificial neural network, 150

Irwin, J.S.

A suggested method for dispersion model evaluation, 255

Izzotti, A.

Indoor pollution and burning practices in wood stove management, 1309

Jayanty, R.K.M.

Major ionic compositions of fine particulate matter in an animal feeding operation facility and its vicinity, 1279

United States National PM2.5 Chemical Speciation Monitoring Networks—CSN and IMPROVE: Description of networks, 1409

Jayawardene, I.

Evaluating the capabilities of Aerosol-to-Liquid Particle Extraction System (ALPXS)/ICP-MS for monitoring trace metals in indoor air, 1028

Jeon, J.-S.

Installation of platform screen doors and their impact on indoor air quality: Seoul subway trains, 1054

Jiang, J.-R.

Preparation of needle trap samplers to extract air compounds from indoor electric-vaporizing sources, 488

Jiang, R.-T.

Outdoor fine and ultrafine particle measurements at six bus stops with smoking on two California arterial highways—Results of a pilot study, 47

Jing, Y.H.

Photocatalytic reduction of carbon dioxide to methanol and formic acid by graphene-TiO2, 578

Johnsen, D.L.

Open burning and open detonation PM10 mass emission factor measurements with optical remote sensing, 227

Johnson, A

An uncertainty analysis of mean flow velocity measurements used to quantify emissions from stationary sources, 679

Johnson, J.

Future year ozone source attribution modeling studies for the eastern and western United States, 1174

Implementation and application of sub-grid-scale plume treatment in the latest version of EPA’s third-generation air quality model, CMAQ 5.01, 453

Johnson, T.

Concentrations of mobile source air pollutants in urban microenvironments, 743

Measurement of microenvironmental ozone concentrations in Durham, North Carolina, using a 2B Technologies 205 Federal Equivalent Method monitor and an interference-free 2B Technologies 211 monitor, 360

Jung, H.S.

Effect of low-density polyethylene on smoke emissions from burning of simulated debris piles, 690

Thermal conductivity characteristics of dewatered sewage sludge by thermal hydrolysis reaction, 1383

Jung, Jaegun

Future year ozone source attribution modeling studies for the eastern and western United States, 1174

Jung, Jinsang

Estimating and comparing greenhouse gas emissions with their uncertainties using different methods: A case study for an energy supply utility, 1164

Jung, W.

Identification of the sources of PM10 in a subway tunnel using positive matrix factorization, 1360

Kılıç, Z.

Biosorption properties of zinc(II) from aqueous solutions by Pseudevernia furfuracea (L.) Zopf, 1112

Evaluation of different isotherm models, kinetic, thermodynamic, and copper biosorption efficiency of Lobaria pulmonaria (L.) Hoffm., 115

Kaduwela, A.P.

An extended approach to calculate the ozone relative response factors used in the attainment demonstration for the National Ambient Air Quality Standards, 1204

Kanaya, Y.

Sensitivity analysis of source regions to PM2.5 concentration at Fukue Island, Japan, 445

Kang, J.

A laboratory study of microalgae-based ammonia gas mitigation with potential application for improving air quality in animal production operations, 330

Kang, L.

Laccase production by Phomopsis liquidambari B3 cultured with food waste and wheat straw as the main nitrogen and carbon sources, 1154

Kang, W.

Estimating and comparing greenhouse gas emissions with their uncertainties using different methods: A case study for an energy supply utility, 1164

Karaca, G.

Migration of polycyclic aromatic hydrocarbons (PAHs) in urban treatment sludge to the air during PAH removal applications, 568

Karademir, A.

Siting a municipal solid waste disposal facility, Part II: The effects of external criteria on the final decision, 131

Karamchandani, P.

Evaluation of light-duty vehicle mobile source regulations on ozone concentration trends in 2018 and 2030 in the western and eastern United States, 175

Future year ozone source attribution modeling studies for the eastern and western United States, 1174

Implementation and application of sub-grid-scale plume treatment in the latest version of EPA’s third-generation air quality model, CMAQ 5.01, 453

Karita, K.

Difference in concentration trends of airborne particulate matter during rush hour on weekdays and Sundays in Tokyo, Japan, 1045

Karl, T.R.

Changes in weather and climate extremes: State of knowledge relevant to air and water quality in the United States, 184

Kasisira, L.

Characterization of municipal waste in Kampala, Uganda, 340

Kasperek, J.

Transverse approach between tunnel environment and corrosion: Particulate matter in the Grand Mare tunnel, 198

Katra, I.

Contribution of dust storms to PM10 levels in an urban arid environment, 89

Kemal Korucu, M.

Siting a municipal solid waste disposal facility, Part II: The effects of external criteria on the final decision, 131

Kemme, M.R.

Open burning and open detonation PM10 mass emission factor measurements with optical remote sensing, 227

Kennedy, M.G.

Combined analysis of modeled and monitored SO2 concentrations at a complex smelting facility, 272

Kerr, A.A.F.S.

Analysis of atmospheric aerosol (PM2.5) in Recife city, Brazil, 519

Keskinen, J.

Heavy-duty, off-road diesel engine low-load particle number emissions and particle control, 1186

Khalil, M.A.K.

Annual and weekly patterns of ozone and particulate matter in Jeddah, Saudi Arabia, 817

Kidokoro, T.

Evaluation of light-duty vehicle mobile source regulations on ozone concentration trends in 2018 and 2030 in the western and eastern United States, 175

Future year ozone source attribution modeling studies for the eastern and western United States, 1174

Kim, B.J.

Open burning and open detonation PM10 mass emission factor measurements with optical remote sensing, 227

Kim, D.

Identification of the sources of PM10 in a subway tunnel using positive matrix factorization, 1360

Kim, H.S.

Recovering valuable metals from recycled photovoltaic modules, 797

Kim, J.

Production of granular activated carbon from food-processing wastes (walnut shells and jujube seeds) and its adsorptive properties, 879

Kim, J.-C.

Installation of platform screen doors and their impact on indoor air quality: Seoul subway trains, 1054

Kim, M.J.

Recovering valuable metals from recycled photovoltaic modules, 797

Kim, S.B.

Preparation of electrospun polyurethane filter media and their collection mechanisms for ultrafine particles, 322

Kim, S.H.

Preparation of electrospun polyurethane filter media and their collection mechanisms for ultrafine particles, 322

Kimbrough, S.

Analysis of mobile source air toxics (MSATs)—Near-road VOC and carbonyl concentrations, 349

Kinobe, J.R.

Characterization of municipal waste in Kampala, Uganda, 340

Kinugasa, Y.

Evaluation of light-duty vehicle mobile source regulations on ozone concentration trends in 2018 and 2030 in the western and eastern United States, 175

Future year ozone source attribution modeling studies for the eastern and western United States, 1174

Kleanthous, S.

PM10 concentration levels at an urban and background site in Cyprus: The impact of urban sources and dust storms, 1351

Kleinman, M.T.

Public health and components of particulate matter: The changing assessment of black carbon, 1221

Klemm, R.

Public health and components of particulate matter: The changing assessment of black carbon, 620

Klepeis, N.E.

Outdoor fine and ultrafine particle measurements at six bus stops with smoking on two California arterial highways—Results of a pilot study, 47

Knipping, E.

Emissions Variability Processor (EMVAP): Design, evaluation, and application, 1389

Implementation and application of sub-grid-scale plume treatment in the latest version of EPA’s third-generation air quality model, CMAQ 5.01, 453

Koloutsou-Vakakis, S.

Open burning and open detonation PM10 mass emission factor measurements with optical remote sensing, 227

Komakech, A.J.

Characterization of municipal waste in Kampala, Uganda, 340

Komazaki, Y.

Sensitivity analysis of source regions to PM2.5 concentration at Fukue Island, Japan, 445

Kondo, Y.

Difference in concentration trends of airborne particulate matter during rush hour on weekdays and Sundays in Tokyo, Japan, 1045

Kossin, J.P.

Changes in weather and climate extremes: State of knowledge relevant to air and water quality in the United States, 184

Koutrakis, P.

Contribution of dust storms to PM10 levels in an urban arid environment, 89

PM10 concentration levels at an urban and background site in Cyprus: The impact of urban sources and dust storms, 1351

Krasnov, H.

Contribution of dust storms to PM10 levels in an urban arid environment, 89

Krishna, A.P.

A comprehensive study on landfill site selection for Kolkata City, India, 846

Kukkonen, J.

PM2.5 concentrations in London for 2008–A modeling analysis of contributions from road traffic, 509

Kulkarni, S.

An extended approach to calculate the ozone relative response factors used in the attainment demonstration for the National Ambient Air Quality Standards, 1204

Kumar, N.

Emissions Variability Processor (EMVAP): Design, evaluation, and application, 1389

Kunkel, K.E.

Changes in weather and climate extremes: State of knowledge relevant to air and water quality in the United States, 184

Kuo,Y.-M.

Role of sodium ions in the vitrification process: Glass matrix modification, slag structure depolymerization, and influence of metal immobilization, 774

Kuprov, R.

Composition and secondary formation of fine particulate matter in the Salt Lake Valley: Winter 2009, 957

Kurokawa, J.-i.

Influence of model grid resolution on NO2 vertical column densities over East Asia, 436

Sensitivity analysis of source regions to PM2.5 concentration at Fukue Island, Japan, 445

Kytö, M.

Heavy-duty, off-road diesel engine low-load particle number emissions and particle control, 1186

Lähde, T.

Heavy-duty, off-road diesel engine low-load particle number emissions and particle control, 1186

Lan, J.

Process analysis of a regional air pollution episode over Pearl River Delta Region, China, using the MM5-CMAQ model, 406

Laosiripojana, N.

Synthesis of high-purity Na-A and Na-X zeolite from coal fly ash, 586

Larson, T.V.

Comparison of stack measurement data from R&D facilities to regulatory criteria: A case study from PNNL, 235

Lawrimore, J.H.

Changes in weather and climate extremes: State of knowledge relevant to air and water quality in the United States, 184

Leber, D.

Diffusion-controlled toluene reference material for VOC emissions testing: International interlaboratory study, 468

Lee, H.J.

Installation of platform screen doors and their impact on indoor air quality: Seoul subway trains, 1054

Lee, K.

Identification of the sources of PM10 in a subway tunnel using positive matrix factorization, 1360

Outdoor tobacco smoke exposure at the perimeter of a tobacco-free university, 863

Lee, M.-H.

Preparation of electrospun polyurethane filter media and their collection mechanisms for ultrafine particles, 322

Lee, S.

Estimating and comparing greenhouse gas emissions with their uncertainties using different methods: A case study for an energy supply utility, 1164

Lee, T.

Identification of the sources of PM10 in a subway tunnel using positive matrix factorization, 1360

Lee,Y.

Identification of the sources of PM10 in a subway tunnel using positive matrix factorization, 1360

Lei, H.

Toward verifying fossil fuel CO2 emissions with the CMAQ model: Motivation, model description and initial simulation, 419

Lepage, M.F.

Combined analysis of modeled and monitored SO2 concentrations at a complex smelting facility, 272

Leung, B.

A two-step approach for relating tapered element oscillating microbalance and dichotomous air sampler PM2.5 measurements, 1195

Li, B.

Slightly acidic electrolyzed water for reducing airborne microorganisms in a layer breeding house, 494

Li, C.

A model for interprovincial air pollution control based on futures prices, 552

Li, H.

Recovery of elemental sulfur from zinc concentrate direct leaching residue using atmospheric distillation: A pilot-scale experimental study, 95

Li, L.

Recovery of elemental sulfur from zinc concentrate direct leaching residue using atmospheric distillation: A pilot-scale experimental study, 95

Li, Q.

Classification and comparison of municipal solid waste based on thermochemical characteristics, 597

Li, Q.-F.

Major ionic compositions of fine particulate matter in an animal feeding operation facility and its vicinity, 1279

Li, W.-K.

Simultaneous removal of sulfur dioxide and polycyclic aromatic hydrocarbons from incineration flue gas using activated carbon fibers, 1038

Li, X.

Computational fluid dynamics modeling of laboratory flames and an industrial flare, 1328

The accuracy of two- and three-way positive matrix factorization models: Applying simulated multisite data sets, 1122

Lin, C.

Preparation of needle trap samplers to extract air compounds from indoor electric-vaporizing sources, 488

Lin, C.-F.

Photocatalytic reduction of carbon dioxide to methanol and formic acid by graphene-TiO2, 578

Lin, J.-P.

Improving the indoor air quality of respiratory type of medical facility by zeolite filtering, 13

Lin, W.-Y.

Effects of water-emulsified fuel on a diesel engine generator’s thermal efficiency and exhaust, 970

Lindhjem, C.

Trends in on-road vehicle emissions and ambient air quality in Atlanta, Georgia, USA, from the late 1990s through 2009, 808

Liou, J.-J.

Preparation of needle trap samplers to extract air compounds from indoor electric-vaporizing sources, 488

Little, J.C.

Diffusion-controlled toluene reference material for VOC emissions testing: International interlaboratory study, 468

Liu, H.-t.

Improvement of salinity in sewage sludge compost prior to its utilization as nursery substrate, 546

Liu, L.

Effect of biochar on nitrous oxide emission and its potential mechanisms, 894

Liu, S.

Toward verifying fossil fuel CO2 emissions with the CMAQ model: Motivation, model description and initial simulation, 419

Liu, S.-X.

Characterization and seasonal variations of levoglucosan in fine particulate matter in Xi’an, China, 1317

Liu, Z.

Diffusion-controlled toluene reference material for VOC emissions testing: International interlaboratory study, 468

Major ionic compositions of fine particulate matter in an animal feeding operation facility and its vicinity, 1279

Toward verifying fossil fuel CO2 emissions with the CMAQ model: Motivation, model description and initial simulation, 419

Liu, Z.-S.

Simultaneous removal of sulfur dioxide and polycyclic aromatic hydrocarbons from incineration flue gas using activated carbon fibers, 1038

Long, Y.

Classification and comparison of municipal solid waste based on thermochemical characteristics, 597

López, G.

Particle size distribution and its relationship to black carbon in two urban and one rural site in Santiago de Chile, 785

Lou, H.H.

Computational fluid dynamics modeling of laboratory flames and an industrial flare, 1328

Loughlin, D.H.

Global climate change: The quantifiable sustainability challenge, 979

Lu, J.

Analysis and discussion on formation and control of primary particulate matter generated from coal-fired power plants, 1341

Luengas Munoz, A. T.

A hybrid biological process of indoor air treatment for toluene removal, 1402

Ma, L.

Trends in on-road vehicle emissions and ambient air quality in Atlanta, Georgia, USA, from the late 1990s through 2009, 808

Ma, W.

Recovery of elemental sulfur from zinc concentrate direct leaching residue using atmospheric distillation: A pilot-scale experimental study, 95

Mackie, K.R.

Development of a chemical kinetic model for a biosolids fluidized-bed gasifier and the effects of operating parameters on syngas quality, 160

Majumdar, D.

Emission, speciation, and evaluation of impacts of non-methane volatile organic compounds from open dump site, 834

Mao, J.

Toward verifying fossil fuel CO2 emissions with the CMAQ model: Motivation, model description and initial simulation, 419

Marco da Silva, A.

Identifying problems for choosing suitable areas for installation of a new landfill through GIS technology: A case study, 80

Markwitz, A.

Particulate matter sources on an hourly timescale in a rural community during the winter, 501

Martínez, R.

Particle size distribution and its relationship to black carbon in two urban and one rural site in Santiago de Chile, 785

Mathur, R.

Space-time analysis of the Air Quality Model Evaluation International Initiative (AQMEII) Phase 1 air quality simulations, 388

Matsuo, T.

Decomposition of organochlorine compounds in flue gas frommunicipal solidwaste incinerators using natural and activated acid clays, 1021

Matsuto, T.

Decomposition of organochlorine compounds in flue gas frommunicipal solidwaste incinerators using natural and activated acid clays, 1021

McCarthy, M.C.

Changes in air quality at near-roadway schools after a major freeway expansion in Las Vegas, Nevada, 1003

McDade, C.E.

United States National PM2.5 Chemical Speciation Monitoring Networks—CSN and IMPROVE: Description of Networks, 1409

McMahon, J.R.

Changes in weather and climate extremes: State of knowledge relevant to air and water quality in the United States, 184

Mei, Y.-Z.

Laccase production by Phomopsis liquidambari B3 cultured with food waste and wheat straw as the main nitrogen and carbon sources, 1154

Melly, S.

Childhood asthma acute primary care visits, traffic, and traffic-related pollutants, 561

Meng, A.

Classification and comparison of municipal solid waste based on thermochemical characteristics, 597

Michelsen, H.A.

Toward verifying fossil fuel CO2 emissions with the CMAQ model: Motivation, model description and initial simulation, 419

Miller, J.W.

Effect of low-density polyethylene on smoke emissions from burning of simulated debris piles, 690

Minoura, H.

Evaluation of light-duty vehicle mobile source regulations on ozone concentration trends in 2018 and 2030 in the western and eastern United States, 175

Future year ozone source attribution modeling studies for the eastern and western United States, 1174

Mokhtar, M.M.

Understanding selected trace elements behavior in a coal-fired power plant in Malaysia for assessment of abatement technologies, 867

Moore, E.

An uncertainty analysis of mean flow velocity measurements used to quantify emissions from stationary sources, 679

Mori, Y.

Sensitivity analyses of factors influencing CMAQ performance for fine particulate nitrate, 374

Morikawa, T.

Sensitivity analyses of factors influencing CMAQ performance for fine particulate nitrate, 374

Morino, Y.

Sensitivity analyses of factors influencing CMAQ performance for fine particulate nitrate, 374

Morris, M.P.

Nonvolatile, semivolatile, or volatile: Redefining volatile for volatile organic compounds, 661

Mosca, S.

Assessment of nitrous oxide emission from cement plants: Real data measured with both Fourier transform infrared and nondispersive infrared techniques, 1270

Muniyandi, S. K.

Encapsulation of nonmetallic fractions recovered from printed circuit boards waste with thermoplastic, 1085

Munoz, A.

Improving the correlations of ambient tapered element oscillating microbalance PM2.5 data and SHARP 5030 Federal Equivalent Method in Ontario: A multiple linear regression analysis, 104

Murray, D.R.

Probability analyses of combining background concentrations with model-predicted concentrations, 248

Muzio, L.J.

Laboratory testing of a continuous emissions monitor for hydrochloric acid, 670

Nardocci, A.C.

Airborne polycyclic aromatic hydrocarbons in a medium-sized city affected by preharvest sugarcane burning and inhalation risk for human health, 1130

Nascimento, V.F.

Identifying problems for choosing suitable areas for installation of a new landfill through GIS technology: A case study, 80

Newman, M.B.

Comparative statistical study of hourly precipitation determined by radar-based Stage IV and ground-based methods in the North Central United States, 291

Probability analyses of combining background concentrations with model-predicted concentrations, 248

Ng, L.P.T.

Evaluation of hazardous airborne carbonyls on a university campus in southern China, 903

Nunifu, T.

A two-step approach for relating tapered element oscillating microbalance and dichotomous air sampler PM2.5 measurements, 1195

Ohara, T.

Influence of model grid resolution on NO2 vertical column densities over East Asia, 436

Sensitivity analyses of factors influencing CMAQ performance for fine particulate nitrate, 374

Sensitivity analysis of source regions to PM2.5 concentration at Fukue Island, Japan, 445

Ollison, W.

Concentrations of mobile source air pollutants in urban microenvironments, 743

Measurement of microenvironmental ozone concentrations in Durham, North Carolina, using a 2B Technologies 205 Federal Equivalent Method monitor and an interference-free 2B Technologies 211 monitor, 360

Olsen, S.R.

Evaluation of the SO2 and NOX offset ratio method to account for secondary PM2.5 formation, 265

Olson, N.

Composition and secondary formation of fine particulate matter in the Salt Lake Valley: Winter 2009, 957

Ondarts, M.

A hybrid biological process of indoor air treatment for toluene removal, 1402

Ott, W.R.

Outdoor fine and ultrafine particle measurements at six bus stops with smoking on two California arterial highways—Results of a pilot study, 47

Ouyang, Y.

Freight shipment modal split and its environmental impacts: An exploratory study, 2

Oyola, P.

Particle size distribution and its relationship to black carbon in two urban and one rural site in Santiago de Chile, 785

Paine, R.

Emissions Variability Processor (EMVAP): Design, evaluation, and application, 1389

Palma, T.

Analysis of mobile source air toxics (MSATs)—Near-road VOC and carbonyl concentrations, 349

Pan, K.L.

Direct N2O decomposition over La2NiO4-based perovskite-type oxides, 1260

Pan, X.

Sensitivity analysis of source regions to PM2.5 concentration at Fukue Island, Japan, 445

Panitchakarn, P.

Synthesis of high-purity Na-A and Na-X zeolite from coal fly ash, 586

Pardyjak, E.R.

Investigation of time-resolved atmospheric conditions and indoor/outdoor particulate matter concentrations in homes with gas and biomass cook stoves in Nogales, Sonora, Mexico, 759

Park, D.

Identification of the sources of PM10 in a subway tunnel using positive matrix factorization, 1360

Park, K.J.

Thermal conductivity characteristics of dewatered sewage sludge by thermal hydrolysis reaction, 1383

Paul, K.

A comprehensive study on landfill site selection for Kolkata City, India, 846

Pavasant P.

Synthesis of high-purity Na-A and Na-X zeolite from coal fly ash, 586

Pekney, N.J.

Measurement of atmospheric pollutants associated with oil and natural gas exploration and production activity in Pennsylvania’s Allegheny National Forest, 1062

Peng, L.

Carbon dioxide adsorption on amine-impregnated mesoporous materials prepared from spent quartz sand, 827

Recycling research on spent fluorescent lamps on the basis of extended producer responsibility in China, 1299

Pérez, P.

Particle size distribution and its relationship to black carbon in two urban and one rural site in Santiago de Chile, 785

Perkins, L.

Childhood asthma acute primary care visits, traffic, and traffic-related pollutants, 561

Pesquero, C.R.

Airborne polycyclic aromatic hydrocarbons in a medium-sized city affected by preharvest sugarcane burning and inhalation risk for human health, 1130

Peters, A.

Low emission zones reduce PM10 mass concentrations and diesel soot in German cities, 481

Peterson, T.C.

Changes in weather and climate extremes: State of knowledge relevant to air and water quality in the United States, 184

Piccardo, M.T.

Indoor pollution and burning practices in wood stove management, 1309

Pinto, J.P.

Toward verifying fossil fuel CO2 emissions with the CMAQ model: Motivation, model description and initial simulation, 419

Pisano, J.T.

Laboratory testing of a continuous emissions monitor for hydrochloric acid, 670

Platel, V.

A hybrid biological process of indoor air treatment for toluene removal, 1402

Pollard, A.

Comparison of variability in dioxin and furan data acquired using single train and simultaneous multiple train stack sampling methods, 1093

Pope, R.

A multi-objective assessment of an air quality monitoring network using environmental, economic, and social indicators and GIS-based models, 721

Porter, W.C.

Annual and weekly patterns of ozone and particulate matter in Jeddah, Saudi Arabia, 817

Princiotta, F.T.

Global climate change: The quantifiable sustainability challenge, 979

Qi, L.

Effect of low-density polyethylene on smoke emissions from burning of simulated debris piles, 690

Qian, Z.

Carbon dioxide adsorption on amine-impregnated mesoporous materials prepared from spent quartz sand, 827

Quick, J.C.

Carbon dioxide emission tallies for 210 U.S. coal-fired power plants: A comparison of two accounting methods, 73

Rao, P.S.

Emission, speciation, and evaluation of impacts of non-methane volatile organic compounds from open dump site, 834

Rao, S.T.

Space-time analysis of the Air Quality Model Evaluation International Initiative (AQMEII) Phase 1 air quality simulations, 388

Rasmussen, P.E.

Evaluating the capabilities of Aerosol-to-Liquid Particle Extraction System (ALPXS)/ICP-MS for monitoring trace metals in indoor air, 1028

Ray, S.

Emission, speciation, and evaluation of impacts of non-methane volatile organic compounds from open dump site, 834

Record, R.

Outdoor tobacco smoke exposure at the perimeter of a tobacco-free university, 863

Reeder, M.

Measurement of atmospheric pollutants associated with oil and natural gas exploration and production activity in Pennsylvania’s Allegheny National Forest, 1062

Reguer, A.

A hybrid biological process of indoor air treatment for toluene removal, 1402

Rehbein, P.J.G.

Combined analysis of modeled and monitored SO2 concentrations at a complex smelting facility, 272

Ren, X.

Analysis and discussion on formation and control of primary particulate matter generated from coal-fired power plants, 1341

Reyes, F.

Particle size distribution and its relationship to black carbon in two urban and one rural site in Santiago de Chile, 785

Ribeiro, H.

Airborne polycyclic aromatic hydrocarbons in a medium-sized city affected by preharvest sugarcane burning and inhalation risk for human health, 1130

Rich, A.

An exploratory study of air emissions associated with shale gas development and production in the Barnett Shale, 61

Richardson, P.

Outdoor tobacco smoke exposure at the perimeter of a tobacco-free university, 863

Richmond, P.

Computational fluid dynamics modeling of laboratory flames and an industrial flare, 1328

Rickman, E.E.

United States National PM2.5 Chemical Speciation Monitoring Networks—CSN and IMPROVE: Description of Networks, 1409

Riker, C.

Outdoor tobacco smoke exposure at the perimeter of a tobacco-free university, 863

Roberts, P.T.

Changes in air quality at near-roadway schools after a major freeway expansion in Las Vegas, Nevada, 1003

Robinson, A.L.

Air pollutant emissions from the development, production, and processing of Marcellus Shale natural gas, 19

Rohr, A.

Childhood asthma acute primary care visits, traffic, and traffic-related pollutants, 561

Rood, M.J.

Open burning and open detonation PM10 mass emission factor measurements with optical remote sensing, 227

Roselle, S.

Space-time analysis of the Air Quality Model Evaluation International Initiative (AQMEII) Phase 1 air quality simulations, 388

Rotatori, M.

Assessment of nitrous oxide emission from cement plants: Real data measured with both Fourier transform infrared and nondispersive infrared techniques, 1270

Roy, A.A.

Air pollutant emissions from the development, production, and processing of Marcellus Shale natural gas, 19

Rubio, M.A.

Particle size distribution and its relationship to black carbon in two urban and one rural site in Santiago de Chile, 785

Rupp, E.

Measurement of atmospheric pollutants associated with oil and natural gas exploration and production activity in Pennsylvania’s Allegheny National Forest, 1062

Ryu, I.-C.

Installation of platform screen doors and their impact on indoor air quality: Seoul subway trains, 1054

Sabnis, M.S.

Mobile measurement of methane and hydrogen sulfide at natural gas production site fence lines in the Texas Barnett Shale, 927

Salihoglu, G.

Immobilization of antimony waste slag by applying geopolymerization and stabilization/solidification technologies, 1288

Samarov, D.

Diffusion-controlled toluene reference material for VOC emissions testing: International interlaboratory study, 468

Samburova, V.

Impact of emissions from natural gas production facilities on ambient air quality in the Barnett Shale area: A pilot study, 1368

Sanni, O.

An uncertainty analysis of mean flow velocity measurements used to quantify emissions from stationary sources, 679

Sattler, M.L.

An exploratory study of air emissions associated with shale gas development and production in the Barnett Shale, 61

Mobile measurement of methane and hydrogen sulfide at natural gas production site fence lines in the Texas Barnett Shale, 927

Schlesinger, R.B.

Public health and components of particulate matter: The changing assessment of black carbon, 620

Schwalm, C.R.

Toward verifying fossil fuel CO2 emissions with the CMAQ model: Motivation, model description and initial simulation, 419

Schwartz, J.

PM10 concentration levels at an urban and background site in Cyprus: The impact of urban sources and dust storms, 1351

Shah, S.B.

Major ionic compositions of fine particulate matter in an animal feeding operation facility and its vicinity, 1279

Shah, T.

Future year ozone source attribution modeling studies for the eastern and western United States, 1174

Shang, G.

Effect of biochar on nitrous oxide emission and its potential mechanisms, 894

Sheesley, R.J.

Urban impacts on regional carbonaceous aerosols: Case study in central Texas, 917

Shen, G.

Effect of biochar on nitrous oxide emission and its potential mechanisms, 894

Shen, J.-H.

Improving the indoor air quality of respiratory type of medical facility by zeolite filtering, 13

Shen, Z.-X.

Characterization and seasonal variations of levoglucosan in fine particulate matter in Xi’an, China, 1317

Shi, G.-L.

The accuracy of two- and three-way positive matrix factorization models: Applying simulated multisite data sets, 1122

Shi, X.

Toward verifying fossil fuel CO2 emissions with the CMAQ model: Motivation, model description and initial simulation, 419

Shimadera, H.

Sensitivity analyses of factors influencing CMAQ performance for fine particulate nitrate, 374

Shin, J.Y.

Trivalent chromium solubility and its influence on quantification of hexavalent chromium in ambient particulate matter using EPA method 6800, 1438

Shiue, A.

Carbon dioxide adsorption on amine-impregnated mesoporous materials prepared from spent quartz sand, 827

Shiva Nagendra, S.M.

Characterizing and predicting coarse and fine particulates in classrooms located close to an urban roadway, 945

Shrivastava, M.

Effect of low-density polyethylene on smoke emissions from burning of simulated debris piles, 690

Sinclair, A.H.

Childhood asthma acute primary care visits, traffic, and traffic-related pollutants, 561

Singh, K.D.

Computational fluid dynamics modeling of laboratory flames and an industrial flare, 1328

Singh, V.

PM2.5 concentrations in London for 2008–A modeling analysis of contributions from road traffic, 509

Soares, N.S.

Airborne polycyclic aromatic hydrocarbons in a medium-sized city affected by preharvest sugarcane burning and inhalation risk for human health, 1130

Sochard, S.

A hybrid biological process of indoor air treatment for toluene removal, 1402

Söderström, C.

Heavy-duty, off-road diesel engine low-load particle number emissions and particle control, 1186

Soentgen, J.

Low emission zones reduce PM10 mass concentrations and diesel soot in German cities, 481

Sofowote, U.

Improving the correlations of ambient tapered element oscillating microbalance PM2.5 data and SHARP 5030 Federal Equivalent Method in Ontario: A multiple linear regression analysis, 104

Sohaili, J.

Encapsulation of nonmetallic fractions recovered from printed circuit boards waste with thermoplastic, 1085

Sokhi, R.S.

PM2.5 concentrations in London for 2008–A modeling analysis of contributions from road traffic, 509

Solomon, P.A.

United States National PM2.5 Chemical Speciation Monitoring Networks—CSN and IMPROVE: Description of Networks, 1409

Son, Y.-S.

Installation of platform screen doors and their impact on indoor air quality: Seoul subway trains, 1054

Song, H.W.

Thermal conductivity characteristics of dewatered sewage sludge by thermal hydrolysis reaction, 1383

Sonntag, D.B.

Particulate matter speciation profiles for light-duty gasoline vehicles in the United States, 529

Sonoda, Y.

Evaluation of light-duty vehicle mobile source regulations on ozone concentration trends in 2018 and 2030 in the western and eastern United States, 175

Future year ozone source attribution modeling studies for the eastern and western United States, 1174

Sorial, G.A.

Treatment of hydrophobic VOCs in trickling bed air biofilter: Emphasis on long-term effect of initial alternate use of hydrophilic VOCs and microbial species evolution, 1102

Spataro, F.

Sources of atmospheric nitrous acid: State of the science, current research needs, and future prospects, 1232

Spengler, J.

Childhood asthma acute primary care visits, traffic, and traffic-related pollutants, 561

Srivastava, A.

Emission, speciation, and evaluation of impacts of non-methane volatile organic compounds from open dump site, 834

Stella, A.

Indoor pollution and burning practices in wood stove management, 1309

Su, Y.

Carbon dioxide adsorption on amine-impregnated mesoporous materials prepared from spent quartz sand, 827

Improving the correlations of ambient tapered element oscillating microbalance PM2.5 data and SHARP 5030 Federal Equivalent Method in Ontario: A multiple linear regression analysis, 104

Sun, M.

Effect of biochar on nitrous oxide emission and its potential mechanisms, 894

Sun, W.

An integrated simulation and optimization approach for managing human health risks of atmospheric pollutants by coal-fired power plants, 704

Sundberg, C.

Characterization of municipal waste in Kampala, Uganda, 340

Syu, J.-Y.

Effects of water-emulsified fuel on a diesel engine generator’s thermal efficiency and exhaust, 970

Szembek, C.

Emissions Variability Processor (EMVAP): Design, evaluation, and application, 1389

Taib, R.M.

Understanding selected trace elements behavior in a coal-fired power plant in Malaysia for assessment of abatement technologies, 867

Takahashi, S.

Decomposition of organochlorine compounds in flue gas frommunicipal solidwaste incinerators using natural and activated acid clays, 1021

Taketani, F.

Sensitivity analysis of source regions to PM2.5 concentration at Fukue Island, Japan, 445

Tamilia, J.

Measurement of atmospheric pollutants associated with oil and natural gas exploration and production activity in Pennsylvania’s Allegheny National Forest, 1062

Tamura, K.

Difference in concentration trends of airborne particulate matter during rush hour on weekdays and Sundays in Tokyo, Japan, 1045

Tan, Q.

An integrated simulation and optimization approach for managing human health risks of atmospheric pollutants by coal-fired power plants, 704

Tasdemir, Y.

Migration of polycyclic aromatic hydrocarbons (PAHs) in urban treatment sludge to the air during PAH removal applications, 568

Teeters E.

Outdoor tobacco smoke exposure at the perimeter of a tobacco-free university, 863

Tian, Y.-Z.

The accuracy of two- and three-way positive matrix factorization models: Applying simulated multisite data sets, 1122

Tolsma, D.

Childhood asthma acute primary care visits, traffic, and traffic-related pollutants, 561

Tran, T.

Recovering valuable metals from recycled photovoltaic modules, 797

Trompetter, W.J.

Particulate matter sources on an hourly timescale in a rural community during the winter, 501

Tseng, C.-H.

Effects of water-emulsified fuel on a diesel engine generator’s thermal efficiency and exhaust, 970

Valerio, F.

Indoor pollution and burning practices in wood stove management, 1309

Vaughn, D.L.

Changes in air quality at near-roadway schools after a major freeway expansion in Las Vegas, Nevada, 1003

Veloski, G.

Measurement of atmospheric pollutants associated with oil and natural gas exploration and production activity in Pennsylvania’s Allegheny National Forest, 1062

Veríssimo, T.G.

Analysis of atmospheric aerosol (PM2.5) in Recife city, Brazil, 519

Vijayaraghavan, K.

Trends in on-road vehicle emissions and ambient air quality in Atlanta, Georgia, USA, from the late 1990s through 2009, 808

Vinnerås, B.

Characterization of municipal waste in Kampala, Uganda, 340

Viriya-umpikul, N.

Synthesis of high-purity Na-A and Na-X zeolite from coal fly ash, 586

Virtanen, A.

Heavy-duty, off-road diesel engine low-load particle number emissions and particle control, 1186

Võ, U.-U.T.

Nonvolatile, semivolatile, or volatile: Redefining volatile for volatile organic compounds, 661

Vose, R.S.

Changes in weather and climate extremes: State of knowledge relevant to air and water quality in the United States, 184

Wang, C.

Slightly acidic electrolyzed water for reducing airborne microorganisms in a layer breeding house, 494

Wang, G.-H.

Characterization and seasonal variations of levoglucosan in fine particulate matter in Xi’an, China, 1317

Wang, J.

The accuracy of two- and three-way positive matrix factorization models: Applying simulated multisite data sets, 1122

Wang, M.

Recovery of elemental sulfur from zinc concentrate direct leaching residue using atmospheric distillation: A pilot-scale experimental study, 95

Wang, T.

A laboratory study of microalgae-based ammonia gas mitigation with potential application for improving air quality in animal production operations, 330

Wang, W.

The accuracy of two- and three-way positive matrix factorization models: Applying simulated multisite data sets, 1122

Wang, X.

Process analysis of a regional air pollution episode over Pearl River Delta Region, China, using the MM5-CMAQ model, 406

Wang, Y.

Recycling research on spent fluorescent lamps on the basis of extended producer responsibility in China, 1299

Wang, Y.-S.

Improving the indoor air quality of respiratory type of medical facility by zeolite filtering, 13

Wang-Li, L.

Major ionic compositions of fine particulate matter in an animal feeding operation facility and its vicinity, 1279

Watson, J.G.

Characterization and seasonal variations of levoglucosan in fine particulate matter in Xi’an, China, 1317

Public health and components of particulate matter: The changing assessment of black carbon, 617

Public health and components of particulate matter: The changing assessment of black carbon, 1221

Weatherburn, D.C.

Particulate matter sources on an hourly timescale in a rural community during the winter, 501

Weber, S.F.

Comparative statistical study of hourly precipitation determined by radar-based Stage IV and ground-based methods in the North Central United States, 291

Wei, W.

Recovery of elemental sulfur from zinc concentrate direct leaching residue using atmospheric distillation: A pilot-scale experimental study, 95

Wei, Y.

Toward verifying fossil fuel CO2 emissions with the CMAQ model: Motivation, model description and initial simulation, 419

Weise, D.R.

Effect of low-density polyethylene on smoke emissions from burning of simulated debris piles, 690

Wen, Z.

A laboratory study of microalgae-based ammonia gas mitigation with potential application for improving air quality in animal production operations, 330

Wendell, D.

Treatment of hydrophobic VOCs in trickling bed air biofilter: Emphasis on long-term effect of initial alternate use of hydrophilic VOCs and microbial species evolution, 1102

Wetzel, A.

Measurement of atmospheric pollutants associated with oil and natural gas exploration and production activity in Pennsylvania’s Allegheny National Forest, 1062

White, R.J.

Comparative statistical study of hourly precipitation determined by radar-based Stage IV and ground-based methods in the North Central United States, 291

Wichmann, H.-E.

Low emission zones reduce PM10 mass concentrations and diesel soot in German cities, 481

Woo, J.

Estimating and comparing greenhouse gas emissions with their uncertainties using different methods: A case study for an energy supply utility, 1164

Woodruff, R.K.

Comparison of stack measurement data from R&D facilities to regulatory criteria: A case study from PNNL, 235

Wu, J.

A multi-objective assessment of an air quality monitoring network using environmental, economic, and social indicators and GIS-based models, 721

Wu, S.

Recovery of elemental sulfur from zinc concentrate direct leaching residue using atmospheric distillation: A pilot-scale experimental study, 95

Wu, S.-H.

Improving the indoor air quality of respiratory type of medical facility by zeolite filtering, 13

Wu, Z.-H.

Preparation of needle trap samplers to extract air compounds from indoor electric-vaporizing sources, 488

Wyzga, R.

Childhood asthma acute primary care visits, traffic, and traffic-related pollutants, 561

Wyzga, R.E.

Public health and components of particulate matter: The changing assessment of black carbon, 1221

Xin, H.

A laboratory study of microalgae-based ammonia gas mitigation with potential application for improving air quality in animal production operations, 330

Inactivation of airborne Enterococcus faecalis and infectious bursal disease virus using a pilot-scale ultraviolet photocatalytic oxidation scrubber, 38

Xue, J.

A model for interprovincial air pollution control based on futures prices, 552

Yamaji, K.

Influence of model grid resolution on NO2 vertical column densities over East Asia, 436

Sensitivity analyses of factors influencing CMAQ performance for fine particulate nitrate, 374

Sensitivity analysis of source regions to PM2.5 concentration at Fukue Island, Japan, 445

Yan, S.Y.

Direct N2O decomposition over La2NiO4-based perovskite-type oxides, 1260

Yan, Y.-L.

Effects of water-emulsified fuel on a diesel engine generator’s thermal efficiency and exhaust, 970

Yanca, C.A.

Particulate matter speciation profiles for light-duty gasoline vehicles in the United States, 529

Yang, T.

Laccase production by Phomopsis liquidambari B3 cultured with food waste and wheat straw as the main nitrogen and carbon sources, 1154

Yang, Z.-Y.

Preparation of needle trap samplers to extract air compounds from indoor electric-vaporizing sources, 488

Yano, E.

Difference in concentration trends of airborne particulate matter during rush hour on weekdays and Sundays in Tokyo, Japan, 1045

Yao, X.

Recovery of elemental sulfur from zinc concentrate direct leaching residue using atmospheric distillation: A pilot-scale experimental study, 95

Yarwood, G.

Implementation and application of sub-grid-scale plume treatment in the latest version of EPA’s third-generation air quality model, CMAQ 5.01, 453

Trends in on-road vehicle emissions and ambient air quality in Atlanta, Georgia, USA, from the late 1990s through 2009, 808

Yi, Y.K.

Recovering valuable metals from recycled photovoltaic modules, 797

Yiallouros, P.K.

PM10 concentration levels at an urban and background site in Cyprus: The impact of urban sources and dust storms, 1351

Yin, X.

Changes in weather and climate extremes: State of knowledge relevant to air and water quality in the United States, 184

Younes, M.K.

Modeling of methane oxidation in landfill cover soil using an artificial neural network, 150

Yu, C.H.

Trivalent chromium solubility and its influence on quantification of hexavalent chromium in ambient particulate matter using EPA method 6800, 1438

Yu, S.J.

Direct N2O decomposition over La2NiO4-based perovskite-type oxides, 1260

Yu, W.

Process analysis of a regional air pollution episode over Pearl River Delta Region, China, using the MM5-CMAQ model, 406

Yuen, W.

Open burning and open detonation PM10 mass emission factor measurements with optical remote sensing, 227

Zehraoui, A.

Treatment of hydrophobic VOCs in trickling bed air biofilter: Emphasis on long-term effect of initial alternate use of hydrophilic VOCs and microbial species evolution, 1102

Zell, S.E.

Comparative statistical study of hourly precipitation determined by radar-based Stage IV and ground-based methods in the North Central United States, 291

Zeng, T.

Toward verifying fossil fuel CO2 emissions with the CMAQ model: Motivation, model description and initial simulation, 419

Zhang, Q.

Photocatalytic reduction of carbon dioxide to methanol and formic acid by graphene-TiO2, 578

Slightly acidic electrolyzed water for reducing airborne microorganisms in a layer breeding house, 494

Zhang, T.

Characterization and seasonal variations of levoglucosan in fine particulate matter in Xi’an, China, 1317

Zhang, Y.

Classification and comparison of municipal solid waste based on thermochemical characteristics, 597

Zhao, C.

Toward verifying fossil fuel CO2 emissions with the CMAQ model: Motivation, model description and initial simulation, 419

Zhao, L.

A model for interprovincial air pollution control based on futures prices, 552

Zhao, Y.

Inactivation of airborne Enterococcus faecalis and infectious bursal disease virus using a pilot-scale ultraviolet photocatalytic oxidation scrubber, 38

Zheng, G.-d.

Improvement of salinity in sewage sludge compost prior to its utilization as nursery substrate, 546

Zhou, H.

Classification and comparison of municipal solid waste based on thermochemical characteristics, 597

Zhou, J.

Laccase production by Phomopsis liquidambari B3 cultured with food waste and wheat straw as the main nitrogen and carbon sources, 1154

Zhou, X.-Y.

The accuracy of two- and three-way positive matrix factorization models: Applying simulated multisite data sets, 1122

Zielinska, B.

Impact of emissions from natural gas production facilities on ambient air quality in the Barnett Shale area: A pilot study, 1368

Zou, D.

Process analysis of a regional air pollution episode over Pearl River Delta Region, China, using the MM5-CMAQ model, 406

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.