Subject Index
Abatement Technologies
Understanding selected trace elements behavior in a coal-fired power plant in Malaysia for assessment of abatement technologies, 867
Acidic Electrolyzed Water
Slightly acidic electrolyzed water for reducing airborne microorganisms in a layer breeding house, 494
Acid Leaching
An effective utilization of the slag from acid leaching of coal-waste: Preparation of water glass with a low-temperature co-melting reaction, 887
Activated Acid Clays
Decomposition of organochlorine compounds in flue gas from municipal solid waste incinerators using natural and activated acid clays, 1021
Activated Carbon Fibers
Simultaneous removal of sulfur dioxide and polycyclic aromatic hydrocarbons from incineration flue gas using activated carbon fibers, 1038
Adsorption
Application of magnetically modified sewage sludge ash (SSA) in ionic dye adsorption, 141
Carbon dioxide adsorption on amine-impregnated mesoporous materials prepared from spent quartz sand, 827
AERMOD
AERMOD performance evaluation for three coal-fired electrical generating units in Southwest Indiana, 280
Statistical evaluation of a new air dispersion model against AERMOD using the Prairie Grass data set, 219
Aerosol-to-Liquid Particle Extraction System (ALPXS)/ICP-MS
Evaluating the capabilities of Aerosol-to-Liquid Particle Extraction System (ALPXS)/ICP-MS for monitoring trace metals in indoor air, 1028
Airborne Carbonyls
Evaluation of hazardous airborne carbonyls on a university campus in southern China, 903
Airborne Microorganisms
Slightly acidic electrolyzed water for reducing airborne microorganisms in a layer breeding house, 494
Airborne Particulate Matter
Difference in concentration trends of airborne particulate matter during rush hour on weekdays and Sundays in Tokyo, Japan, 1045
Airborne Polycyclic Aromatic Hydrocarbons
Airborne polycyclic aromatic hydrocarbons in a medium-sized city affected by preharvest sugarcane burning and inhalation risk for human health, 1130
Air Dispersion Model
Statistical evaluation of a new air dispersion model against AERMOD using the Prairie Grass data set, 219
Air Emissions
An exploratory study of air emissions associated with shale gas development and production in the Barnett Shale, 61
Air Pollutants
Air pollutant emissions from the development, production, and processing of Marcellus Shale natural gas, 19
Concentrations of mobile source air pollutants in urban microenvironments, 743
Air Pollution
A model for interprovincial air pollution control based on futures prices, 552
Process analysis of a regional air pollution episode over Pearl River Delta Region, China, using the MM5-CMAQ model, 406
Air Quality
Changes in air quality at near-roadway schools after a major freeway expansion in Las Vegas, Nevada, 1003
Changes in weather and climate extremes: State of knowledge relevant to air and water quality in the United States, 184
Characterization of indoor air quality and resident health in an Arizona senior housing apartment building, 1251
Implementation and application of sub-grid-scale plume treatment in the latest version of EPA’s third-generation air quality model, CMAQ 5.01, 453
Installation of platform screen doors and their impact on indoor air quality: Seoul subway trains, 1054
A laboratory study of microalgae-based ammonia gas mitigation with potential application for improving air quality in animal production operations, 330
Space-time analysis of the Air Quality Model Evaluation International Initiative (AQMEII) Phase 1 air quality simulations, 388
Trends in on-road vehicle emissions and ambient air quality in Atlanta, Georgia, USA, from the late 1990s through 2009, 808
Air Quality Model Evaluation International Initiative (AQMEII)
Space-time analysis of the Air Quality Model Evaluation International Initiative (AQMEII) Phase 1 air quality simulations, 388
Air Quality Models
Introduction to a special grouping of papers from the 2013 A&WMA International Specialty Conference, Guideline on Air Quality Models: The Path Forward, 247
Air Quality Monitoring Network
A multi-objective assessment of an air quality monitoring network using environmental, economic, and social indicators and GIS-based models, 721
Air Sampler PM2.5 Measurements
A two-step approach for relating tapered element oscillating microbalance and dichotomous air sampler PM2.5 measurements, 1195
Air Treatment
A hybrid biological process of indoor air treatment for toluene removal, 1402
Ambient Air Quality
Impact of emissions from natural gas production facilities on ambient air quality in the Barnett Shale area: A pilot study, 1368
Ambient Particulate Matter
Trivalent chromium solubility and its influence on quantification of hexavalent chromium in ambient particulate matter using EPA method 6800, 1438
Ambient Tapered Element
Improving the correlations of ambient tapered element oscillating microbalance PM2.5 data and SHARP 5030 Federal Equivalent Method in Ontario: A multiple linear regression analysis, 104
Ammonia
A laboratory study of microalgae-based ammonia gas mitigation with potential application for improving air quality in animal production operations, 330
Animal Feeding Operation Facility
Major ionic compositions of fine particulate matter in an animal feeding operation facility and its vicinity, 1279
Animal Production Operations
A laboratory study of microalgae-based ammonia gas mitigation with potential application for improving air quality in animal production operations, 330
Antimony Waste
Immobilization of antimony waste slag by applying geopolymerization and stabilization/solidification technologies, 1288
Aromatic Hydrocarbons
Airborne polycyclic aromatic hydrocarbons in a medium-sized city affected by preharvest sugarcane burning and inhalation risk for human health, 1130
Artificial Neural Network
Modeling of methane oxidation in landfill cover soil using an artificial neural network, 150
Asthma
Childhood asthma acute primary care visits, traffic, and traffic-related pollutants, 561
Atmospheric Aerosol (PM2.5)
Analysis of atmospheric aerosol (PM2.5) in Recife city, Brazil, 519
Atmospheric Distillation
Recovery of elemental sulfur from zinc concentrate direct leaching residue using atmospheric distillation: A pilot-scale experimental study, 95
Atmospheric Nitrous Acid
Sources of atmospheric nitrous acid: State of the science, current research needs, and future prospects, 1232
Atmospheric Pollutants
An integrated simulation and optimization approach for managing human health risks of atmospheric pollutants by coal-fired power plants, 704
Measurement of atmospheric pollutants associated with oil and natural gas exploration and production activity in Pennsylvania’s Allegheny National Forest, 1062
Attainment Demonstrations
Modeled and observed fine particulate matter reductions from state attainment demonstrations, 995
A&WMA International Specialty Conference
Introduction to a special grouping of papers from the 2013 A&WMA International Specialty Conference, Guideline on Air Quality Models: The Path Forward, 247
Barnett Shale
An exploratory study of air emissions associated with shale gas development and production in the Barnett Shale, 61
Impact of emissions from natural gas production facilities on ambient air quality in the Barnett Shale area: A pilot study, 1368
Bed Air Biofilter
Treatment of hydrophobic VOCs in trickling bed air biofilter: Emphasis on long-term effect of initial alternate use of hydrophilic VOCs and microbial species evolution, 1102
Biochar
Effect of biochar on nitrous oxide emission and its potential mechanisms, 894
Biomass
Investigation of time-resolved atmospheric conditions and indoor/outdoor particulate matter concentrations in homes with gas and biomass cook stoves in Nogales, Sonora, Mexico, 759
Biosolids
Development of a chemical kinetic model for a biosolids fluidized-bed gasifier and the effects of operating parameters on syngas quality, 160
Black Carbon
Particle size distribution and its relationship to black carbon in two urban and one rural site in Santiago de Chile, 785
Public Health and Components of Particulate Matter: The Changing Assessment of Black Carbon, 617, 620, 1221
Burning Practices
Indoor pollution and burning practices in wood stove management, 1309
Carbon
Laccase production by Phomopsis liquidambari B3 cultured with food waste and wheat straw as the main nitrogen and carbon sources, 1154
Particle size distribution and its relationship to black carbon in two urban and one rural site in Santiago de Chile, 785
Production of granular activated carbon from food-processing wastes (walnut shells and jujube seeds) and its adsorptive properties, 879
Carbon Dioxide
Carbon dioxide adsorption on amine-impregnated mesoporous materials prepared from spent quartz sand, 827
Photocatalytic reduction of carbon dioxide to methanol and formic acid by graphene-TiO2, 578
Toward verifying fossil fuel CO2 emissions with the CMAQ model: Motivation, model description and initial simulation, 419
Carbonyl
Analysis of mobile source air toxics (MSATs)—Near-road VOC and carbonyl concentrations, 349
Chemical Kinetic Model
Development of a chemical kinetic model for a biosolids fluidized-bed gasifier and the effects of operating parameters on syngas quality, 160
Childhood Asthma
Childhood asthma acute primary care visits, traffic, and traffic-related pollutants, 561
Chromium Solubility
Trivalent chromium solubility and its influence on quantification of hexavalent chromium in ambient particulate matter using EPA method 6800, 1438
Climate Change
Global climate change: The quantifiable sustainability challenge, 979
CMAQ
Sensitivity analyses of factors influencing CMAQ performance for fine particulate nitrate, 374
Toward verifying fossil fuel CO2 emissions with the CMAQ model: Motivation, model description and initial simulation, 419
CMAQ 5.01
Implementation and application of sub-grid-scale plume treatment in the latest version of EPA’s third-generation air quality model, CMAQ 5.01, 453
Coal-Fired Electrical Generating Units
AERMOD performance evaluation for three coal-fired electrical generating units in Southwest Indiana, 280
Coal-Fired Power Plant
Understanding selected trace elements behavior in a coal-fired power plant in Malaysia for assessment of abatement technologies, 867
Analysis and discussion on formation and control of primary particulate matter generated from coal-fired power plants, 1341
An integrated simulation and optimization approach for managing human health risks of atmospheric pollutants by coal-fired power plants, 704
Carbon dioxide emission tallies for 210 U.S. coal-fired power plants: A comparison of two accounting methods, 73
Coal-Waste
An effective utilization of the slag from acid leaching of coal-waste: Preparation of water glass with a low-temperature co-melting reaction, 887
Collection Mechanisms
Preparation of electrospun polyurethane filter media and their collection mechanisms for ultrafine particles, 322
Co-Melting Reaction
An effective utilization of the slag from acid leaching of coal-waste: Preparation of water glass with a low-temperature co-melting reaction, 887
Community Modeling and Analysis System (CMAS) Conference
Introduction to a special grouping of papers from the 2012 Community Modeling and Analysis System (CMAS) Conference, 373
Comparative Statistical Study
Comparative statistical study of hourly precipitation determined by radar-based Stage IV and ground-based methods in the North Central United States, 291
Complex Smelting Facility
Combined analysis of modeled and monitored SO2 concentrations at a complex smelting facility, 272
Computational Fluid Dynamics Modeling
Computational fluid dynamics modeling of laboratory flames and an industrial flare, 1328
Continuous Emissions Monitor
Laboratory testing of a continuous emissions monitor for hydrochloric acid, 670
Copper Biosorption Efficiency
Evaluation of different isotherm models, kinetic, thermodynamic, and copper biosorption efficiency of Lobaria pulmonaria (L.) Hoffm., 115
Depolymerization
Role of sodium ions in the vitrification process: Glass matrix modification, slag structure depolymerization, and influence of metal immobilization, 774
Diesel Engine Generator
Effects of water-emulsified fuel on a diesel engine generator’s thermal efficiency and exhaust, 970
Diesel Soot
Low emission zones reduce PM10 mass concentrations and diesel soot in German cities, 481
Diffusion-Controlled Toluene Reference Material
Diffusion-controlled toluene reference material for VOC emissions testing: International interlaboratory study, 468
Dioxin
Comparison of variability in dioxin and furan data acquired using single train and simultaneous multiple train stack sampling methods, 1093
Direct N2O Decomposition
Direct N2O decomposition over La2NiO4-based perovskite-type oxides, 1260
Dispersion Model Evaluation
A suggested method for dispersion model evaluation, 255
Dispersion Models
Minimum turbulence assumptions and u* and L estimation for dispersion models during low-wind stable conditions, 309
Dust Storms
Contribution of dust storms to PM10 levels in an urban arid environment, 89
PM10 concentration levels at an urban and background site in Cyprus: The impact of urban sources and dust storms, 1351
Dye Adsorption
Application of magnetically modified sewage sludge ash (SSA) in ionic dye adsorption, 141
Electric-Vaporizing Sources
Preparation of needle trap samplers to extract air compounds from indoor electric-vaporizing sources, 488
Electrospinning
Study on particulates and volatile organic compounds removal with TiO2 nonwoven filter prepared by electrospinning, 738
Electrospun Polyurethane Filter Media
Preparation of electrospun polyurethane filter media and their collection mechanisms for ultrafine particles, 322
Elemental Sulfur Recovery
Recovery of elemental sulfur from zinc concentrate direct leaching residue using atmospheric distillation: A pilot-scale experimental study, 95
Emission Control
Planning of methane emission control from hoggery using an inexact two-stage optimization model, 1140
Emissions
An uncertainty analysis of mean flow velocity measurements used to quantify emissions from stationary sources, 679
Assessment of nitrous oxide emission from cement plants: Real data measured with both Fourier transform infrared and nondispersive infrared techniques, 1270
Carbon dioxide emission tallies for 210 U.S. coal-fired power plants: A comparison of two accounting methods, 73
Effect of biochar on nitrous oxide emission and its potential mechanisms, 894
Effect of low-density polyethylene on smoke emissions from burning of simulated debris piles, 690
Estimating and comparing greenhouse gas emissions with their uncertainties using different methods: A case study for an energy supply utility, 1164
Heavy-duty, off-road diesel engine low-load particle number emissions and particle control, 1186
Impact of emissions from natural gas production facilities on ambient air quality in the Barnett Shale area: A pilot study, 1368
Laboratory testing of a continuous emissions monitor for hydrochloric acid, 670
Low emission zones reduce PM10 mass concentrations and diesel soot in German cities, 481
Open burning and open detonation PM10 mass emission factor measurements with optical remote sensing, 227
Toward verifying fossil fuel CO2 emissions with the CMAQ model: Motivation, model description and initial simulation, 419
Trends in on-road vehicle emissions and ambient air quality in Atlanta, Georgia, USA, from the late 1990s through 2009, 808
Emissions Testing
Diffusion-controlled toluene reference material for VOC emissions testing: International interlaboratory study, 468
Emissions Variability Processor (EMVAP)
Emissions Variability Processor (EMVAP): Design, evaluation, and application, 1389
Energy Supply Utility
Estimating and comparing greenhouse gas emissions with their uncertainties using different methods: A case study for an energy supply utility, 1164
Enterococcus faecalis
Inactivation of airborne Enterococcus faecalis and infectious bursal disease virus using a pilot-scale ultraviolet photocatalytic oxidation scrubber, 38
Environmental Impacts
Freight shipment modal split and its environmental impacts: An exploratory study, 2
EPA Method
Trivalent chromium solubility and its influence on quantification of hexavalent chromium in ambient particulate matter using EPA method 6800, 1438
Fine Particulate Matter
Composition and secondary formation of fine particulate matter in the Salt Lake Valley: Winter 2009, 957
Fine Particulate Matter Reduction
Modeled and observed fine particulate matter reductions from state attainment demonstrations, 995
Flue Gas From Municipal Solid Waste Incinerators
Decomposition of organochlorine compounds in flue gas from municipal solid waste incinerators using natural and activated acid clays, 1021
Fluorescent Lamps
Recycling research on spent fluorescent lamps on the basis of extended producer responsibility in China, 1299
Food-Processing Wastes
Production of granular activated carbon from food-processing wastes (walnut shells and jujube seeds) and its adsorptive properties, 879
Food Waste
Laccase production by Phomopsis liquidambari B3 cultured with food waste and wheat straw as the main nitrogen and carbon sources, 1154
Formic Acid
Photocatalytic reduction of carbon dioxide to methanol and formic acid by graphene-TiO2, 578
Fossil Fuel
Toward verifying fossil fuel CO2 emissions with the CMAQ model: Motivation, model description and initial simulation, 419
Fourier Transform
Assessment of nitrous oxide emission from cement plants: Real data measured with both Fourier transform infrared and nondispersive infrared techniques, 1270
Freeway Expansion
Changes in air quality at near-roadway schools after a major freeway expansion in Las Vegas, Nevada, 1003
Freight Shipment Modal Split
Freight shipment modal split and its environmental impacts: An exploratory study, 2
Gas
Investigation of time-resolved atmospheric conditions and indoor/outdoor particulate matter concentrations in homes with gas and biomass cook stoves in Nogales, Sonora, Mexico, 759
Gas Emissions
Estimating and comparing greenhouse gas emissions with their uncertainties using different methods: A case study for an energy supply utility, 1164
Gas Mitigation
A laboratory study of microalgae-based ammonia gas mitigation with potential application for improving air quality in animal production operations, 330
Gasoline Vehicles
Particulate matter speciation profiles for light-duty gasoline vehicles in the United States, 529
Geopolymerization
Immobilization of antimony waste slag by applying geopolymerization and stabilization/solidification technologies, 1288
GIS-Based Models
A multi-objective assessment of an air quality monitoring network using environmental, economic, and social indicators and GIS-based models, 721
GIS Technology
Identifying problems for choosing suitable areas for installation of a new landfill through GIS technology: A case study, 80
Glass Matrix Modification
Role of sodium ions in the vitrification process: Glass matrix modification, slag structure depolymerization, and influence of metal immobilization, 774
Global Climate Change
Global climate change: The quantifiable sustainability challenge, 979
Grand Mare tunnel
Transverse approach between tunnel environment and corrosion: Particulate matter in the Grand Mare tunnel, 198
Granular Activated Carbon
Production of granular activated carbon from food-processing wastes (walnut shells and jujube seeds) and its adsorptive properties, 879
Graphene-TiO2
Photocatalytic reduction of carbon dioxide to methanol and formic acid by graphene-TiO2, 578
Greenhouse Gas Emissions
Estimating and comparing greenhouse gas emissions with their uncertainties using different methods: A case study for an energy supply utility, 1164
Ground-Based Methods
Comparative statistical study of hourly precipitation determined by radar-based Stage IV and ground-based methods in the North Central United States, 291
Hazardous Airborne Carbonyls
Evaluation of hazardous airborne carbonyls on a university campus in southern China, 903
Heavy Metal-Contaminated Soil
Effects of remediation train sequence on decontamination of heavy metal-contaminated soil containing mercury, 1013
Hexavalent Chromium
Trivalent chromium solubility and its influence on quantification of hexavalent chromium in ambient particulate matter using EPA method 6800, 1438
High-Strength Landfill Leachate
A comparative examination of MBR and SBR performance for the treatment of high-strength landfill leachate, 1073
Hoggery
Planning of methane emission control from hoggery using an inexact two-stage optimization model, 1140
Human Health Risks
Airborne polycyclic aromatic hydrocarbons in a medium-sized city affected by preharvest sugarcane burning and inhalation risk for human health, 1130
An integrated simulation and optimization approach for managing human health risks of atmospheric pollutants by coal-fired power plants, 704
Hybrid Biological Process
A hybrid biological process of indoor air treatment for toluene removal, 1402
Hydrochloric Acid
Laboratory testing of a continuous emissions monitor for hydrochloric acid, 670
Hydrogen Sulfide
Mobile measurement of methane and hydrogen sulfide at natural gas production site fence lines in the Texas Barnett Shale, 927
Hydrophobic VOCs
Treatment of hydrophobic VOCs in trickling bed air biofilter: Emphasis on long-term effect of initial alternate use of hydrophilic VOCs and microbial species evolution, 1102
Incineration Flue Gas
Simultaneous removal of sulfur dioxide and polycyclic aromatic hydrocarbons from incineration flue gas using activated carbon fibers, 1038
Indoor Air
Evaluating the capabilities of Aerosol-to-Liquid Particle Extraction System (ALPXS)/ICP-MS for monitoring trace metals in indoor air, 1028
Indoor Air Quality
Characterization of indoor air quality and resident health in an Arizona senior housing apartment building, 1251
Improving the indoor air quality of respiratory type of medical facility by zeolite filtering, 13
Installation of platform screen doors and their impact on indoor air quality: Seoul subway trains, 1054
Indoor Air Treatment
A hybrid biological process of indoor air treatment for toluene removal, 1402
Indoor Electric-Vaporizing Sources
Preparation of needle trap samplers to extract air compounds from indoor electric-vaporizing sources, 488
Indoor Pollution
Indoor pollution and burning practices in wood stove management, 1309
Industrial Flare
Computational fluid dynamics modeling of laboratory flames and an industrial flare, 1328
Infectious Bursal Disease Virus
Inactivation of airborne Enterococcus faecalis and infectious bursal disease virus using a pilot-scale ultraviolet photocatalytic oxidation scrubber, 38
Infrared Techniques
Assessment of nitrous oxide emission from cement plants: Real data measured with both Fourier transform infrared and nondispersive infrared techniques, 1270
Interprovincial Air Pollution Control
A model for interprovincial air pollution control based on futures prices, 552
Ionic Compositions
Major ionic compositions of fine particulate matter in an animal feeding operation facility and its vicinity, 1279
Ionic Dye Adsorption
Application of magnetically modified sewage sludge ash (SSA) in ionic dye adsorption, 141
Isotherm Models
Evaluation of different isotherm models, kinetic, thermodynamic, and copper biosorption efficiency of Lobaria pulmonaria (L.) Hoffm., 115
Laccase Production
Laccase production by Phomopsis liquidambari B3 cultured with food waste and wheat straw as the main nitrogen and carbon sources, 1154
Landfill Cover Soil
Modeling of methane oxidation in landfill cover soil using an artificial neural network, 150
Landfill Installation
Identifying problems for choosing suitable areas for installation of a new landfill through GIS technology: A case study, 80
Landfill Site Selection
A comprehensive study on landfill site selection for Kolkata City, India, 846
La2NiO4-Based Perovskite-Type Oxides
Direct N2O decomposition over La2NiO4-based perovskite-type oxides, 1260
Layer Breeding
Slightly acidic electrolyzed water for reducing airborne microorganisms in a layer breeding house, 494
Levoglucosan
Characterization and seasonal variations of levoglucosan in fine particulate matter in Xi’an, China, 1317
Light-Duty Gasoline Vehicles
Particulate matter speciation profiles for light-duty gasoline vehicles in the United States, 529
Light-Duty Vehicle Mobile Source Regulations
Evaluation of light-duty vehicle mobile source regulations on ozone concentration trends in 2018 and 2030 in the western and eastern United States, 175
Lobaria pulmonaria (L.)
Evaluation of different isotherm models, kinetic, thermodynamic, and copper biosorption efficiency of Lobaria pulmonaria (L.) Hoffm., 115
Marcellus Shale Natural Gas
Air pollutant emissions from the development, production, and processing of Marcellus Shale natural gas, 19
Mass Emission
Open burning and open detonation PM10 mass emission factor measurements with optical remote sensing, 227
Matrix Factorization
The accuracy of two- and three-way positive matrix factorization models: Applying simulated multisite data sets, 1122
Identification of the sources of PM10 in a subway tunnel using positive matrix factorization, 1360
MBR
A comparative examination of MBR and SBR performance for the treatment of high-strength landfill leachate, 1073
Mean Flow Velocity
An uncertainty analysis of mean flow velocity measurements used to quantify emissions from stationary sources, 679
Medical Facility
Improving the indoor air quality of respiratory type of medical facility by zeolite filtering, 13
Mercury
Effects of remediation train sequence on decontamination of heavy metal-contaminated soil containing mercury, 1013
Metal-Contaminated Soil
Effects of remediation train sequence on decontamination of heavy metal-contaminated soil containing mercury, 1013
Metal Immobilization
Role of sodium ions in the vitrification process: Glass matrix modification, slag structure depolymerization, and influence of metal immobilization, 774
Methane
Mobile measurement of methane and hydrogen sulfide at natural gas production site fence lines in the Texas Barnett Shale, 927
Methane Emission Control
Planning of methane emission control from hoggery using an inexact two-stage optimization model, 1140
Methane Oxidation
Modeling of methane oxidation in landfill cover soil using an artificial neural network, 150
Methanol
Photocatalytic reduction of carbon dioxide to methanol and formic acid by graphene-TiO2, 578
Microalgae-Based Ammonia
A laboratory study of microalgae-based ammonia gas mitigation with potential application for improving air quality in animal production operations, 330
Microbial Species Evolution
Treatment of hydrophobic VOCs in trickling bed air biofilter: Emphasis on long-term effect of initial alternate use of hydrophilic VOCs and microbial species evolution, 1102
Microenvironmental Ozone Concentrations
Measurement of microenvironmental ozone concentrations in Durham, North Carolina, using a 2B Technologies 205 Federal Equivalent Method monitor and an interference-free 2B Technologies 211 monitor, 360
MM5-CMAQ model
Process analysis of a regional air pollution episode over Pearl River Delta Region, China, using the MM5-CMAQ model, 406
Mobile Source Air Pollutants
Concentrations of mobile source air pollutants in urban microenvironments, 743
Modeled SO2 Concentrations
Combined analysis of modeled and monitored SO2 concentrations at a complex smelting facility, 272
Model Grid Resolution
Influence of model grid resolution on NO2 vertical column densities over East Asia, 436
Model-Predicted Concentrations
Probability analyses of combining background concentrations with model-predicted concentrations, 248
Monitored SO2 Concentrations
Combined analysis of modeled and monitored SO2 concentrations at a complex smelting facility, 272
Multiple Linear Regression Analysis
Improving the correlations of ambient tapered element oscillating microbalance PM2.5 data and SHARP 5030 Federal Equivalent Method in Ontario: A multiple linear regression analysis, 104
Multiple Train Stack Sampling Methods
Comparison of variability in dioxin and furan data acquired using single train and simultaneous multiple train stack sampling methods, 1093
Municipal Solid Waste
Classification and comparison of municipal solid waste based on thermochemical characteristics, 597
Siting a municipal solid waste disposal facility, Part II: The effects of external criteria on the final decision, 131
Municipal Waste
Characterization of municipal waste in Kampala, Uganda, 340
Na-A zeolite
Synthesis of high-purity Na-A and Na-X zeolite from coal fly ash, 586
National Ambient Air Quality Standards
An extended approach to calculate the ozone relative response factors used in the attainment demonstration for the National Ambient Air Quality Standards, 1204
Natural Acid Clays
Decomposition of organochlorine compounds in flue gas from municipal solid waste incinerators using natural and activated acid clays, 1021
Natural Gas
Air pollutant emissions from the development, production, and processing of Marcellus Shale natural gas, 19
Impact of emissions from natural gas production facilities on ambient air quality in the Barnett Shale area: A pilot study, 1368
Measurement of atmospheric pollutants associated with oil and natural gas exploration and production activity in Pennsylvania’s Allegheny National Forest, 1062
Mobile measurement of methane and hydrogen sulfide at natural gas production site fence lines in the Texas Barnett Shale, 927
Na-X zeolite
Synthesis of high-purity Na-A and Na-X zeolite from coal fly ash, 586
Needle Trap Samplers
Preparation of needle trap samplers to extract air compounds from indoor electric-vaporizing sources, 488
Nitrate
Sensitivity analyses of factors influencing CMAQ performance for fine particulate nitrate, 374
Nitrogen
Laccase production by Phomopsis liquidambari B3 cultured with food waste and wheat straw as the main nitrogen and carbon sources, 1154
Nitrous Acid
Sources of atmospheric nitrous acid: State of the science, current research needs, and future prospects, 1232
Nitrous Oxide
Assessment of nitrous oxide emission from cement plants: Real data measured with both Fourier transform infrared and nondispersive infrared techniques, 1270
Direct N2O decomposition over La2NiO4-based perovskite-type oxides, 1260
Effect of biochar on nitrous oxide emission and its potential mechanisms, 894
NO2
Influence of model grid resolution on NO2 vertical column densities over East Asia, 436
Nonmetallic Fractions
Encapsulation of nonmetallic fractions recovered from printed circuit boards waste with thermoplastic, 1085
Non-Methane Volatile Organic Compounds
Emission, speciation, and evaluation of impacts of non-methane volatile organic compounds from open dump site, 834
NOX
Evaluation of the SO2 and NOX offset ratio method to account for secondary PM2.5 formation, 265
Oil
Measurement of atmospheric pollutants associated with oil and natural gas exploration and production activity in Pennsylvania’s Allegheny National Forest, 1062
On-Road Vehicle Emissions
Trends in on-road vehicle emissions and ambient air quality in Atlanta, Georgia, USA, from the late 1990s through 2009, 808
Operating Parameters
Development of a chemical kinetic model for a biosolids fluidized-bed gasifier and the effects of operating parameters on syngas quality, 160
Optical Remote Sensing
Open burning and open detonation PM10 mass emission factor measurements with optical remote sensing, 227
Optimization Approach
An integrated simulation and optimization approach for managing human health risks of atmospheric pollutants by coal-fired power plants, 704
Organic Compounds
Nonvolatile, semivolatile, or volatile: Redefining volatile for volatile organic compounds, 661
Organochlorine Compounds
Decomposition of organochlorine compounds in flue gas from municipal solid waste incinerators using natural and activated acid clays, 1021
Outdoor Fine Particle Measurements
Outdoor fine and ultrafine particle measurements at six bus stops with smoking on two California arterial highways—Results of a pilot study, 47
Ozone
An extended approach to calculate the ozone relative response factors used in the attainment demonstration for the National Ambient Air Quality Standards, 1204
Annual and weekly patterns of ozone and particulate matter in Jeddah, Saudi Arabia, 817
Evaluation of light-duty vehicle mobile source regulations on ozone concentration trends in 2018 and 2030 in the western and eastern United States, 175
Future year ozone source attribution modeling studies for the eastern and western United States, 1174
Measurement of microenvironmental ozone concentrations in Durham, North Carolina, using a 2B Technologies 205 Federal Equivalent Method monitor and an interference-free 2B Technologies 211 monitor, 360
Particle Control
Heavy-duty, off-road diesel engine low-load particle number emissions and particle control, 1186
Particle Measurements
Outdoor fine and ultrafine particle measurements at six bus stops with smoking on two California arterial highways—Results of a pilot study, 47
Particle Size Distribution
Particle size distribution and its relationship to black carbon in two urban and one rural site in Santiago de Chile, 785
Particulate Matter
Public Health and Components of Particulate Matter: The Changing Assessment of Black Carbon, 617, 620, 1221
Phomopsis Liquidambari B3
Laccase production by Phomopsis liquidambari B3 cultured with food waste and wheat straw as the main nitrogen and carbon sources, 1154
Pilot-Scale Ultraviolet Photocatalytic Oxidation Scrubber
Inactivation of airborne Enterococcus faecalis and infectious bursal disease virus using a pilot-scale ultraviolet photocatalytic oxidation scrubber, 38
PM2.5
Evaluation of the SO2 and NOX offset ratio method to account for secondary PM2.5 formation, 265
PM2.5 concentrations in London for 2008–A modeling analysis of contributions from road traffic, 509
Sensitivity analysis of source regions to PM2.5 concentration at Fukue Island, Japan, 445
PM10
Contribution of dust storms to PM10 levels in an urban arid environment, 89
Identification of the sources of PM10 in a subway tunnel using positive matrix factorization, 1360
Low emission zones reduce PM10 mass concentrations and diesel soot in German cities, 481
Open burning and open detonation PM10 mass emission factor measurements with optical remote sensing, 227
PM10 concentration levels at an urban and background site in Cyprus: The impact of urban sources and dust storms, 1351
PM2.5 Chemical Speciation Monitoring Networks
United States National PM2.5 Chemical Speciation Monitoring Networks-CSN and IMPROVE: Description of Networks, 1409
PNNL
Comparison of stack measurement data from R&D facilities to regulatory criteria: A case study from PNNL, 235
Pollutants
An integrated simulation and optimization approach for managing human health risks of atmospheric pollutants by coal-fired power plants, 704
Childhood asthma acute primary care visits, traffic, and traffic-related pollutants, 561
Measurement of atmospheric pollutants associated with oil and natural gas exploration and production activity in Pennsylvania’s Allegheny National Forest, 1062
Pollution Control
A model for interprovincial air pollution control based on futures prices, 552
Polycyclic Aromatic Hydrocarbons (PAHs)
Migration of polycyclic aromatic hydrocarbons (PAHs) in urban treatment sludge to the air during PAH removal applications, 568
Polyethylene
Effect of low-density polyethylene on smoke emissions from burning of simulated debris piles, 690
Positive Matrix Factorization
Identification of the sources of PM10 in a subway tunnel using positive matrix factorization, 1360
Prairie Grass Data Set
Statistical evaluation of a new air dispersion model against AERMOD using the Prairie Grass data set, 219
Primary Particulate Matter
Analysis and discussion on formation and control of primary particulate matter generated from coal-fired power plants, 1341
Printed Circuit Boards Waste
Encapsulation of nonmetallic fractions recovered from printed circuit boards waste with thermoplastic, 1085
Probability Analyses
Probability analyses of combining background concentrations with model-predicted concentrations, 248
Pseudevernia furfuracea (L.)
Biosorption properties of zinc(II) from aqueous solutions by Pseudevernia furfuracea (L.) Zopf, 1112
Public Health
Public Health and Components of Particulate Matter: The Changing Assessment of Black Carbon, 617, 620, 1221
Quartz Sand
Carbon dioxide adsorption on amine-impregnated mesoporous materials prepared from spent quartz sand, 827
R&D Facilities
Comparison of stack measurement data from R&D facilities to regulatory criteria: A case study from PNNL, 235
Recycled Photovoltaic Modules
Recovering valuable metals from recycled photovoltaic modules, 797
Recycling Research
Recycling research on spent fluorescent lamps on the basis of extended producer responsibility in China, 1299
Regional Air Pollution
Process analysis of a regional air pollution episode over Pearl River Delta Region, China, using the MM5-CMAQ model, 406
Regional Carbonaceous Aerosols
Urban impacts on regional carbonaceous aerosols: Case study in central Texas, 917
Road Traffic
PM2.5 concentrations in London for 2008–A modeling analysis of contributions from road traffic, 509
Rural Community
Particulate matter sources on an hourly timescale in a rural community during the winter, 501
Salinity
Improvement of salinity in sewage sludge compost prior to its utilization as nursery substrate, 546
SBR
A comparative examination of MBR and SBR performance for the treatment of high-strength landfill leachate, 1073
Sensitivity Analysis
Sensitivity analyses of factors influencing CMAQ performance for fine particulate nitrate, 374
Sensitivity analysis of source regions to PM2.5 concentration at Fukue Island, Japan, 445
Seoul Subway Trains
Installation of platform screen doors and their impact on indoor air quality: Seoul subway trains, 1054
Sewage
Improvement of salinity in sewage sludge compost prior to its utilization as nursery substrate, 546
Thermal conductivity characteristics of dewatered sewage sludge by thermal hydrolysis reaction, 1383
Sewage Sludge Ash (SSA)
Application of magnetically modified sewage sludge ash (SSA) in ionic dye adsorption, 141
Shale Gas Development and Production
An exploratory study of air emissions associated with shale gas development and production in the Barnett Shale, 61
SHARP 5030 Federal Equivalent Method in Ontario
Improving the correlations of ambient tapered element oscillating microbalance PM2.5 data and SHARP 5030 Federal Equivalent Method in Ontario: A multiple linear regression analysis, 104
Simulation Approach
An integrated simulation and optimization approach for managing human health risks of atmospheric pollutants by coal-fired power plants, 704
Slag Structure Depolymerization
Role of sodium ions in the vitrification process: Glass matrix modification, slag structure depolymerization, and influence of metal immobilization, 774
Smoke Emissions
Effect of low-density polyethylene on smoke emissions from burning of simulated debris piles, 690
SO2
Combined analysis of modeled and monitored SO2 concentrations at a complex smelting facility, 272
Evaluation of the SO2 and NOX offset ratio method to account for secondary PM2.5 formation, 265
Sodium Ions
Role of sodium ions in the vitrification process: Glass matrix modification, slag structure depolymerization, and influence of metal immobilization, 774
Soil
Effects of remediation train sequence on decontamination of heavy metal-contaminated soil containing mercury, 1013
Solid Waste
Classification and comparison of municipal solid waste based on thermochemical characteristics, 597
Decomposition of organochlorine compounds in flue gas from municipal solid waste incinerators using natural and activated acid clays, 1021
Siting a municipal solid waste disposal facility, Part II: The effects of external criteria on the final decision, 131
Space-Time Analysis
Space-time analysis of the Air Quality Model Evaluation International Initiative (AQMEII) Phase 1 air quality simulations, 388
Stabilization/Solidification Technologies
Immobilization of antimony waste slag by applying geopolymerization and stabilization/solidification technologies, 1288
Stack Measurement Data
Comparison of stack measurement data from R&D facilities to regulatory criteria: A case study from PNNL, 235
Sub-Grid-Scale Plume Treatment
Implementation and application of sub-grid-scale plume treatment in the latest version of EPA’s third-generation air quality model, CMAQ 5.01, 453
Sulfur Dioxide
Simultaneous removal of sulfur dioxide and polycyclic aromatic hydrocarbons from incineration flue gas using activated carbon fibers, 1038
Syngas Quality
Development of a chemical kinetic model for a biosolids fluidized-bed gasifier and the effects of operating parameters on syngas quality, 160
Thermal Conductivity
Thermal conductivity characteristics of dewatered sewage sludge by thermal hydrolysis reaction, 1383
Thermal Efficiency
Effects of water-emulsified fuel on a diesel engine generator’s thermal efficiency and exhaust, 970
Thermal Hydrolysis Reaction
Thermal conductivity characteristics of dewatered sewage sludge by thermal hydrolysis reaction, 1383
Time-Resolved Atmospheric Conditions
Investigation of time-resolved atmospheric conditions and indoor/outdoor particulate matter concentrations in homes with gas and biomass cook stoves in Nogales, Sonora, Mexico, 759
TiO2 Nonwoven Filter
Study on particulates and volatile organic compounds removal with TiO2 nonwoven filter prepared by electrospinning, 738
Tobacco Smoke Exposure
Outdoor tobacco smoke exposure at the perimeter of a tobacco-free university, 863
Toluene Removal
A hybrid biological process of indoor air treatment for toluene removal, 1402
Trace Elements Behavior
Understanding selected trace elements behavior in a coal-fired power plant in Malaysia for assessment of abatement technologies, 867
Trace Metals
Evaluating the capabilities of Aerosol-to-Liquid Particle Extraction System (ALPXS)/ICP-MS for monitoring trace metals in indoor air, 1028
Traffic-Related Pollutants
Childhood asthma acute primary care visits, traffic, and traffic-related pollutants, 561
Transverse Approach
Transverse approach between tunnel environment and corrosion: Particulate matter in the Grand Mare tunnel, 198
Trivalent Chromium Solubility
Trivalent chromium solubility and its influence on quantification of hexavalent chromium in ambient particulate matter using EPA method 6800, 1438
Turbulence Assumptions
Minimum turbulence assumptions and u* and L estimation for dispersion models during low-wind stable conditions, 309
2B Technologies
Measurement of microenvironmental ozone concentrations in Durham, North Carolina, using a 2B Technologies 205 Federal Equivalent Method monitor and an interference-free 2B Technologies 211 monitor, 360
Two-Stage Optimization Model
Planning of methane emission control from hoggery using an inexact two-stage optimization model, 1140
Ultrafine Particle Measurements
Outdoor fine and ultrafine particle measurements at six bus stops with smoking on two California arterial highways—Results of a pilot study, 47
Ultrafine Particles
Preparation of electrospun polyurethane filter media and their collection mechanisms for ultrafine particles, 322
Urban Arid Environment
Contribution of dust storms to PM10 levels in an urban arid environment, 89
Urban Impacts
Urban impacts on regional carbonaceous aerosols: Case study in central Texas, 917
Urban Microenvironments
Concentrations of mobile source air pollutants in urban microenvironments, 743
Urban Roadway
Characterizing and predicting coarse and fine particulates in classrooms located close to an urban roadway, 945
Urban Sources
PM10 concentration levels at an urban and background site in Cyprus: The impact of urban sources and dust storms, 1351
Urban Treatment
Migration of polycyclic aromatic hydrocarbons (PAHs) in urban treatment sludge to the air during PAH removal applications, 568
Vaporizing Sources
Preparation of needle trap samplers to extract air compounds from indoor electric-vaporizing sources, 488
Vehicle Emissions
Trends in on-road vehicle emissions and ambient air quality in Atlanta, Georgia, USA, from the late 1990s through 2009, 808
Vehicles
Particulate matter speciation profiles for light-duty gasoline vehicles in the United States, 529
Volatile Organic Compounds (VOC)
Analysis of mobile source air toxics (MSATs)—Near-road VOC and carbonyl concentrations, 349
Diffusion-controlled toluene reference material for VOC emissions testing: International interlaboratory study, 468
Emission, speciation, and evaluation of impacts of non-methane volatile organic compounds from open dump site, 834
Nonvolatile, semivolatile, or volatile: Redefining volatile for volatile organic compounds, 661
Study on particulates and volatile organic compounds removal with TiO2 nonwoven filter prepared by electrospinning, 738
Treatment of hydrophobic VOCs in trickling bed air biofilter: Emphasis on long-term effect of initial alternate use of hydrophilic VOCs and microbial species evolution, 1102
Waste Disposal Facility
Siting a municipal solid waste disposal facility, Part II: The effects of external criteria on the final decision, 131
Wastes
An effective utilization of the slag from acid leaching of coal-waste: Preparation of water glass with a low-temperature co-melting reaction, 887
Classification and comparison of municipal solid waste based on thermochemical characteristics, 597
Encapsulation of nonmetallic fractions recovered from printed circuit boards waste with thermoplastic, 1085
Immobilization of antimony waste slag by applying geopolymerization and stabilization/solidification technologies, 1288
Laccase production by Phomopsis liquidambari B3 cultured with food waste and wheat straw as the main nitrogen and carbon sources, 1154
Production of granular activated carbon from food-processing wastes (walnut shells and jujube seeds) and its adsorptive properties, 879
Water
Changes in weather and climate extremes: State of knowledge relevant to air and water quality in the United States, 184
Slightly acidic electrolyzed water for reducing airborne microorganisms in a layer breeding house, 494
Water-Emulsified Fuel
Effects of water-emulsified fuel on a diesel engine generator’s thermal efficiency and exhaust, 970
Weather
Changes in weather and climate extremes: State of knowledge relevant to air and water quality in the United States, 184
Wind
Minimum turbulence assumptions and u* and L estimation for dispersion models during low-wind stable conditions, 309
Wood Stove Management
Indoor pollution and burning practices in wood stove management, 1309
Zeolite Filtering
Improving the indoor air quality of respiratory type of medical facility by zeolite filtering, 13
Zinc(II)
Biosorption properties of zinc(II) from aqueous solutions by Pseudevernia furfuracea (L.) Zopf, 1112
Zinc Concentrate Direct Leaching
Recovery of elemental sulfur from zinc concentrate direct leaching residue using atmospheric distillation: A pilot-scale experimental study, 95
Author Index
Aarnink, A.J.A.
Inactivation of airborne Enterococcus faecalis and infectious bursal disease virus using a pilot-scale ultraviolet photocatalytic oxidation scrubber, 38
Abushammala, M.F.M.
Modeling of methane oxidation in landfill cover soil using an artificial neural network, 150
Acevedo-Bolton, V.
Outdoor fine and ultrafine particle measurements at six bus stops with smoking on two California arterial highways—Results of a pilot study, 47
Achilleos, S.
PM10 concentration levels at an urban and background site in Cyprus: The impact of urban sources and dust storms, 1351
Adams, P.J.
Air pollutant emissions from the development, production, and processing of Marcellus Shale natural gas, 19
Ahrentzen, S.
Characterization of indoor air quality and resident health in an Arizona senior housing apartment building, 1251
Akolkar, A.B.
Emission, speciation, and evaluation of impacts of non-methane volatile organic compounds from open dump site, 834
Al-Khalaf, A.K.
Annual and weekly patterns of ozone and particulate matter in Jeddah, Saudi Arabia, 817
Al-Sahafi, M.S.
Annual and weekly patterns of ozone and particulate matter in Jeddah, Saudi Arabia, 817
Almazroui, M.
Annual and weekly patterns of ozone and particulate matter in Jeddah, Saudi Arabia, 817
Ameur-Boudabbous, I.
Transverse approach between tunnel environment and corrosion: Particulate matter in the Grand Mare tunnel, 198
Ancelet, T.
Particulate matter sources on an hourly timescale in a rural community during the winter, 501
Anderson, J.J.
Evaluation of the SO2 and NOX offset ratio method to account for secondary PM2.5 formation, 265
Annett, M.A.
Combined analysis of modeled and monitored SO2 concentrations at a complex smelting facility, 272
Aras, S.
Biosorption properties of zinc(II) from aqueous solutions by Pseudevernia furfuracea (L.) Zopf, 1112
Evaluation of different isotherm models, kinetic, thermodynamic, and copper biosorption efficiency of Lobaria pulmonaria (L.) Hoffm., 115
Armani, F.A.S
Statistical evaluation of a new air dispersion model against AERMOD using the Prairie Grass data set, 219
Arnott, W.P.
Concentrations of mobile source air pollutants in urban microenvironments, 743
Arrington, C.R.
Comparative statistical study of hourly precipitation determined by radar-based Stage IV and ground-based methods in the North Central United States, 291
Atakol, O.
Biosorption properties of zinc(II) from aqueous solutions by Pseudevernia furfuracea (L.) Zopf, 1112
Evaluation of different isotherm models, kinetic, thermodynamic, and copper biosorption efficiency of Lobaria pulmonaria (L.) Hoffm., 115
Avise, J.C.
An extended approach to calculate the ozone relative response factors used in the attainment demonstration for the National Ambient Air Quality Standards, 1204
Bae, W.
Production of granular activated carbon from food-processing wastes (walnut shells and jujube seeds) and its adsorptive properties, 879
Baldauf, R.W.
Analysis of mobile source air toxics (MSATs)—Near-road VOC and carbonyl concentrations, 349
Particulate matter speciation profiles for light-duty gasoline vehicles in the United States, 529
Ballinger, M.Y.
Comparison of stack measurement data from R&D facilities to regulatory criteria: A case study from PNNL, 235
Bambha, R.P.
Toward verifying fossil fuel CO2 emissions with the CMAQ model: Motivation, model description and initial simulation, 419
Banadda, N.E.
Characterization of municipal waste in Kampala, Uganda, 340
Barbier, A.
Transverse approach between tunnel environment and corrosion: Particulate matter in the Grand Mare tunnel, 198
Barona, A.
A hybrid biological process of indoor air treatment for toluene removal, 1402
Barrett, T.E.
Urban impacts on regional carbonaceous aerosols: Case study in central Texas, 917
Basri, N.E.A.
Modeling of methane oxidation in landfill cover soil using an artificial neural network, 150
Benedetti, P.
Assessment of nitrous oxide emission from cement plants: Real data measured with both Fourier transform infrared and nondispersive infrared techniques, 1270
Bitzos, M.M.
Improving the correlations of ambient tapered element oscillating microbalance PM2.5 data and SHARP 5030 Federal Equivalent Method in Ontario: A multiple linear regression analysis, 104
Bloomfield, P.
Major ionic compositions of fine particulate matter in an animal feeding operation facility and its vicinity, 1279
Boylan, J.
Toward verifying fossil fuel CO2 emissions with the CMAQ model: Motivation, model description and initial simulation, 419
Bratset, H.
Outdoor tobacco smoke exposure at the perimeter of a tobacco-free university, 863
Brown, S.G.
Changes in air quality at near-roadway schools after a major freeway expansion in Las Vegas, Nevada, 1003
Bruzzone, M.
Indoor pollution and burning practices in wood stove management, 1309
Bryant, R.
An uncertainty analysis of mean flow velocity measurements used to quantify emissions from stationary sources, 679
Bumiller, K.
Laboratory testing of a continuous emissions monitor for hydrochloric acid, 670
Bundy, M.
An uncertainty analysis of mean flow velocity measurements used to quantify emissions from stationary sources, 679
Butenhoff, C.L.
Annual and weekly patterns of ozone and particulate matter in Jeddah, Saudi Arabia, 817
Cai, H.
Improvement of salinity in sewage sludge compost prior to its utilization as nursery substrate, 546
Cai, X.H.
An integrated simulation and optimization approach for managing human health risks of atmospheric pollutants by coal-fired power plants, 704
Cai, Y.P.
An integrated simulation and optimization approach for managing human health risks of atmospheric pollutants by coal-fired power plants, 704
Cairney, P.
Development of a chemical kinetic model for a biosolids fluidized-bed gasifier and the effects of operating parameters on syngas quality, 160
Campbell, D.
Impact of emissions from natural gas production facilities on ambient air quality in the Barnett Shale area: A pilot study, 1368
Campbell, D.E.
Concentrations of mobile source air pollutants in urban microenvironments, 743
Campeau, M.A.
Combined analysis of modeled and monitored SO2 concentrations at a complex smelting facility, 272
Cansaran-Duman, D.
Biosorption properties of zinc(II) from aqueous solutions by Pseudevernia furfuracea (L.) Zopf, 1112
Evaluation of different isotherm models, kinetic, thermodynamic, and copper biosorption efficiency of Lobaria pulmonaria (L.) Hoffm., 115
Cao J.-J.
Characterization and seasonal variations of levoglucosan in fine particulate matter in Xi’an, China, 1317
Cao, J.
Evaluation of hazardous airborne carbonyls on a university campus in southern China, 903
Cao, W.
Slightly acidic electrolyzed water for reducing airborne microorganisms in a layer breeding house, 494
Cao, X.
Effect of biochar on nitrous oxide emission and its potential mechanisms, 894
Capel, J.
Measurement of microenvironmental ozone concentrations in Durham, North Carolina, using a 2B Technologies 205 Federal Equivalent Method monitor and an interference-free 2B Technologies 211 monitor, 360
Catizone, P.A.
Comparative statistical study of hourly precipitation determined by radar-based Stage IV and ground-based methods in the North Central United States, 291
Çelikkol, P.
Evaluation of different isotherm models, kinetic, thermodynamic, and copper biosorption efficiency of Lobaria pulmonaria (L.) Hoffm., 115
Ceppi, M.
Indoor pollution and burning practices in wood stove management, 1309
Chakraborty, S.
Emission, speciation, and evaluation of impacts of non-methane volatile organic compounds from open dump site, 834
Champion, W.M.
Development of a chemical kinetic model for a biosolids fluidized-bed gasifier and the effects of operating parameters on syngas quality, 160
Chan, C.S.
Evaluation of hazardous airborne carbonyls on a university campus in southern China, 903
Chan, P.-w.
Process analysis of a regional air pollution episode over Pearl River Delta Region, China, using the MM5-CMAQ model, 406
Chandler, A.J.
Comparison of variability in dioxin and furan data acquired using single train and simultaneous multiple train stack sampling methods, 1093
Chang, C.-T.
Carbon dioxide adsorption on amine-impregnated mesoporous materials prepared from spent quartz sand, 827
Photocatalytic reduction of carbon dioxide to methanol and formic acid by graphene-TiO2, 578
Recycling research on spent fluorescent lamps on the basis of extended producer responsibility in China, 1299
Study on particulates and volatile organic compounds removal with TiO2 nonwoven filter prepared by electrospinning, 738
Chang, M.B.
Direct N2O decomposition over La2NiO4-based perovskite-type oxides, 1260
Chang, Y.-M.
Effects of water-emulsified fuel on a diesel engine generator’s thermal efficiency and exhaust, 970
Chang, Y.-Y
Effects of water-emulsified fuel on a diesel engine generator’s thermal efficiency and exhaust, 970
Chatani, S.
Sensitivity analyses of factors influencing CMAQ performance for fine particulate nitrate, 374
Chau, D.
An extended approach to calculate the ozone relative response factors used in the attainment demonstration for the National Ambient Air Quality Standards, 1204
Chen, C.-C.
Effects of water-emulsified fuel on a diesel engine generator’s thermal efficiency and exhaust, 970
Chen, D.H.
Computational fluid dynamics modeling of laboratory flames and an industrial flare, 1328
Chen, J.-C.
Planning of methane emission control from hoggery using an inexact two-stage optimization model, 1140
Chen, P.
Effect of biochar on nitrous oxide emission and its potential mechanisms, 894
Chen, R.
An effective utilization of the slag from acid leaching of coal-waste: Preparation of water glass with a low-temperature co-melting reaction, 887
Modeled and observed fine particulate matter reductions from state attainment demonstrations, 995
Chen, T.-b.
Improvement of salinity in sewage sludge compost prior to its utilization as nursery substrate, 546
Chen, W.-H.
Planning of methane emission control from hoggery using an inexact two-stage optimization model, 1140
Cheng, F.
An effective utilization of the slag from acid leaching of coal-waste: Preparation of water glass with a low-temperature co-melting reaction, 887
Cheng, K.-C.
Outdoor fine and ultrafine particle measurements at six bus stops with smoking on two California arterial highways—Results of a pilot study, 47
Cheng, W.-H.
Preparation of needle trap samplers to extract air compounds from indoor electric-vaporizing sources, 488
Chenier, M.
Evaluating the capabilities of Aerosol-to-Liquid Particle Extraction System (ALPXS)/ICP-MS for monitoring trace metals in indoor air, 1028
Chithra, V.S.
Characterizing and predicting coarse and fine particulates in classrooms located close to an urban roadway, 945
Cho, H.
Outdoor tobacco smoke exposure at the perimeter of a tobacco-free university, 863
Cho, K.
Identification of the sources of PM10 in a subway tunnel using positive matrix factorization, 1360
Choi, H.-J.
Preparation of electrospun polyurethane filter media and their collection mechanisms for ultrafine particles, 322
Choi, Y.
Estimating and comparing greenhouse gas emissions with their uncertainties using different methods: A case study for an energy supply utility, 1164
Chow, J.C.
Characterization and seasonal variations of levoglucosan in fine particulate matter in Xi’an, China, 1317
Public health and components of particulate matter: The changing assessment of black carbon, 617
Public health and components of particulate matter: The changing assessment of black carbon, 1221
Chowdhury, B.
Minimum turbulence assumptions and u* and L estimation for dispersion models during low-wind stable conditions, 309
Chowdhury, M.
Emission, speciation, and evaluation of impacts of non-methane volatile organic compounds from open dump site, 834
Chuang, Y.-H.
Study on particulates and volatile organic compounds removal with TiO2 nonwoven filter prepared by electrospinning, 738
Chung, J.
Production of granular activated carbon from food-processing wastes (walnut shells and jujube seeds) and its adsorptive properties, 879
Cindoruk, S.S.
Migration of polycyclic aromatic hydrocarbons (PAHs) in urban treatment sludge to the air during PAH removal applications, 568
Cipolla, M.
Indoor pollution and burning practices in wood stove management, 1309
Cocker, D.R.
Effect of low-density polyethylene on smoke emissions from burning of simulated debris piles, 690
Cohan, D.S.
Modeled and observed fine particulate matter reductions from state attainment demonstrations, 995
Cohn, S.
Characterization of indoor air quality and resident health in an Arizona senior housing apartment building, 1251
Collet, S.
Evaluation of light-duty vehicle mobile source regulations on ozone concentration trends in 2018 and 2030 in the western and eastern United States, 175
Future year ozone source attribution modeling studies for the eastern and western United States, 1174
Cooper, C.D.
Development of a chemical kinetic model for a biosolids fluidized-bed gasifier and the effects of operating parameters on syngas quality, 160
Cotsman, D.J.
Combined analysis of modeled and monitored SO2 concentrations at a complex smelting facility, 272
Cox, S.
Diffusion-controlled toluene reference material for VOC emissions testing: International interlaboratory study, 468
Crabbe, K.
Laboratory testing of a continuous emissions monitor for hydrochloric acid, 670
Cropper, P.M.
Composition and secondary formation of fine particulate matter in the Salt Lake Valley: Winter 2009, 957
Cruickshank, T.
Composition and secondary formation of fine particulate matter in the Salt Lake Valley: Winter 2009, 957
Crumpler, D.
United States National PM2.5 Chemical Speciation Monitoring Networks—CSN and IMPROVE: Description of Networks, 1409
Cyrys, J.
Low emission zones reduce PM10 mass concentrations and diesel soot in German cities, 481
da Costa Dias, N.L.
Statistical evaluation of a new air dispersion model against AERMOD using the Prairie Grass data set, 219
Dai, C.
An integrated simulation and optimization approach for managing human health risks of atmospheric pollutants by coal-fired power plants, 704
Dai, C.-C.
Laccase production by Phomopsis liquidambari B3 cultured with food waste and wheat straw as the main nitrogen and carbon sources, 1154
Dai, W.T.
Evaluation of hazardous airborne carbonyls on a university campus in southern China, 903
DaMassa, J.A.
An extended approach to calculate the ozone relative response factors used in the attainment demonstration for the National Ambient Air Quality Standards, 1204
Davis, J.
Comparison of variability in dioxin and furan data acquired using single train and simultaneous multiple train stack sampling methods, 1093
Davy, P.K.
Particulate matter sources on an hourly timescale in a rural community during the winter, 501
de Almeida, R.C.
Statistical evaluation of a new air dispersion model against AERMOD using the Prairie Grass data set, 219
de Assuncao, J.V.
Airborne polycyclic aromatic hydrocarbons in a medium-sized city affected by preharvest sugarcane burning and inhalation risk for human health, 1130
de Fatima Andrade, M.
Analysis of atmospheric aerosol (PM2.5) in Recife city, Brazil, 519
DenBleyker, A.
Future year ozone source attribution modeling studies for the eastern and western United States, 1174
Trends in on-road vehicle emissions and ambient air quality in Atlanta, Georgia, USA, from the late 1990s through 2009, 808
Dene, C.
Laboratory testing of a continuous emissions monitor for hydrochloric acid, 670
Destaillats, H.
Characterization of indoor air quality and resident health in an Arizona senior housing apartment building, 1251
DeWinter, J.L.
Changes in air quality at near-roadway schools after a major freeway expansion in Las Vegas, Nevada, 1003
dos Santos, L.H.M.
Analysis of atmospheric aerosol (PM2.5) in Recife city, Brazil, 519
Duan, X.
An effective utilization of the slag from acid leaching of coal-waste: Preparation of water glass with a low-temperature co-melting reaction, 887
Duchsherer, C.J.
Comparison of stack measurement data from R&D facilities to regulatory criteria: A case study from PNNL, 235
Durbin, T.D.
Laboratory testing of a continuous emissions monitor for hydrochloric acid, 670
Dutta, A.
A comprehensive study on landfill site selection for Kolkata City, India, 846
Eapi, G.R.
Mobile measurement of methane and hydrogen sulfide at natural gas production site fence lines in the Texas Barnett Shale, 927
Eatough, D.J.
Composition and secondary formation of fine particulate matter in the Salt Lake Valley: Winter 2009, 957
Eklund, A.G.
Public health and components of particulate matter: The changing assessment of black carbon, 617
Public health and components of particulate matter: The changing assessment of black carbon, 1221
El-Fadel, M.
A comparative examination of MBR and SBR performance for the treatment of high-strength landfill leachate, 1073
Elfithri, R.
Modeling of methane oxidation in landfill cover soil using an artificial neural network, 150
Elias, A.
A hybrid biological process of indoor air treatment for toluene removal, 1402
Emregul, E.
Biosorption properties of zinc(II) from aqueous solutions by Pseudevernia furfuracea (L.) Zopf, 1112
Evaluation of different isotherm models, kinetic, thermodynamic, and copper biosorption efficiency of Lobaria pulmonaria (L.) Hoffm., 115
Evans, J.S.
PM10 concentration levels at an urban and background site in Cyprus: The impact of urban sources and dust storms, 1351
Fan, Q.
Process analysis of a regional air pollution episode over Pearl River Delta Region, China, using the MM5-CMAQ model, 406
Fan, S.
Process analysis of a regional air pollution episode over Pearl River Delta Region, China, using the MM5-CMAQ model, 406
Fan, Z.(T.)
Trivalent chromium solubility and its influence on quantification of hexavalent chromium in ambient particulate matter using EPA method 6800, 1438
Fang, L.
An effective utilization of the slag from acid leaching of coal-waste: Preparation of water glass with a low-temperature co-melting reaction, 887
Feng, Y.
Process analysis of a regional air pollution episode over Pearl River Delta Region, China, using the MM5-CMAQ model, 406
Feng, Y.-C.
The accuracy of two- and three-way positive matrix factorization models: Applying simulated multisite data sets, 1122
Flanagan, J.B.
United States National PM2.5 Chemical Speciation Monitoring Networks—CSN and IMPROVE: Description of networks, 1409
Francisco, A.P.
Airborne polycyclic aromatic hydrocarbons in a medium-sized city affected by preharvest sugarcane burning and inhalation risk for human health, 1130
Fraser, M.P.
Characterization of indoor air quality and resident health in an Arizona senior housing apartment building, 1251
Frey, S.E.
Characterization of indoor air quality and resident health in an Arizona senior housing apartment building, 1251
Friger, M.D.
Contribution of dust storms to PM10 levels in an urban arid environment, 89
Frost, K.D.
AERMOD performance evaluation for three coal-fired electrical generating units in Southwest Indiana, 280
Fu, L.
A two-step approach for relating tapered element oscillating microbalance and dichotomous air sampler PM2.5 measurements, 1195
Fujita, E.M.
Concentrations of mobile source air pollutants in urban microenvironments, 743
Fulper, C.R.
Particulate matter speciation profiles for light-duty gasoline vehicles in the United States, 529
Galmarini, S.
Space-time analysis of the Air Quality Model Evaluation International Initiative (AQMEII) Phase 1 air quality simulations, 388
Gangadharan, P.
Computational fluid dynamics modeling of laboratory flames and an industrial flare, 1328
Gao, D.
Improvement of salinity in sewage sludge compost prior to its utilization as nursery substrate, 546
Gao, H.O.
A model for interprovincial air pollution control based on futures prices, 552
Gardner, H.D.
Evaluating the capabilities of Aerosol-to-Liquid Particle Extraction System (ALPXS)/ICP-MS for monitoring trace metals in indoor air, 1028
Ge, L.
Slightly acidic electrolyzed water for reducing airborne microorganisms in a layer breeding house, 494
Gebresenbet, G.
Characterization of municipal waste in Kampala, Uganda, 340
Grahame, T.J.
Public health and components of particulate matter: The changing assessment of black carbon, 620
Gramsch, E.
Particle size distribution and its relationship to black carbon in two urban and one rural site in Santiago de Chile, 785
Greenbaum, D.S.
Public health and components of particulate matter: The changing assessment of black carbon, 1221
Greenfield, M.M.
Combined analysis of modeled and monitored SO2 concentrations at a complex smelting facility, 272
Grover, J.P.
An exploratory study of air emissions associated with shale gas development and production in the Barnett Shale, 61
Guerra, S.A.
Evaluation of the SO2 and NOX offset ratio method to account for secondary PM2.5 formation, 265
Guerriero, E.
Assessment of nitrous oxide emission from cement plants: Real data measured with both Fourier transform infrared and nondispersive infrared techniques, 1270
Guo, H.C.
An integrated simulation and optimization approach for managing human health risks of atmospheric pollutants by coal-fired power plants, 704
Hahn, E.J.
Outdoor tobacco smoke exposure at the perimeter of a tobacco-free university, 863
Han, B.
The accuracy of two- and three-way positive matrix factorization models: Applying simulated multisite data sets, 1122
Han, S.K.
Thermal conductivity characteristics of dewatered sewage sludge by thermal hydrolysis reaction, 1383
Han, Y.-M.
Characterization and seasonal variations of levoglucosan in fine particulate matter in Xi’an, China, 1317
Hanna, A.F.
Introduction to a special grouping of papers from the 2012 Community Modeling and Analysis System (CMAS) Conference, 373
Hanna, S.R.
Minimum turbulence assumptions and u* and L estimation for dispersion models during low-wind stable conditions, 309
Hannoyer, B.
Transverse approach between tunnel environment and corrosion: Particulate matter in the Grand Mare tunnel, 198
Hansen, J.C.
Composition and secondary formation of fine particulate matter in the Salt Lake Valley: Winter 2009, 957
Hao, X.
Slightly acidic electrolyzed water for reducing airborne microorganisms in a layer breeding house, 494
Happonen, M.
Heavy-duty, off-road diesel engine low-load particle number emissions and particle control, 1186
Hara, K.
Difference in concentration trends of airborne particulate matter during rush hour on weekdays and Sundays in Tokyo, Japan, 1045
Hashisho, J.
A comparative examination of MBR and SBR performance for the treatment of high-strength landfill leachate, 1073
Hassan, A.
Encapsulation of nonmetallic fractions recovered from printed circuit boards waste with thermoplastic, 1085
Hassim, M.H.
Understanding selected trace elements behavior in a coal-fired power plant in Malaysia for assessment of abatement technologies, 867
Hayami, H.
Sensitivity analyses of factors influencing CMAQ performance for fine particulate nitrate, 374
Heinold, D.
Emissions Variability Processor (EMVAP): Design, evaluation, and application, 1389
Hidy, G.M.
Public health and components of particulate matter: The changing assessment of black carbon, 617
Public health and components of particulate matter: The changing assessment of black carbon, 1221
Hildemann, L.M.
Outdoor fine and ultrafine particle measurements at six bus stops with smoking on two California arterial highways—Results of a pilot study, 47
Ho, K.F.
Characterization and seasonal variations of levoglucosan in fine particulate matter in Xi’an, China, 1317
Evaluation of hazardous airborne carbonyls on a university campus in southern China, 903
Ho, L.B.
Evaluation of hazardous airborne carbonyls on a university campus in southern China, 903
Ho, S.S.H.
Characterization and seasonal variations of levoglucosan in fine particulate matter in Xi’an, China, 1317
Evaluation of hazardous airborne carbonyls on a university campus in southern China, 903
Hoffnagle, G.F.
Introduction to a special grouping of papers from the 2013 A&WMA International Specialty Conference, Guideline on Air Quality Models: The Path Forward, 247
Hogrefe, C.
Space-time analysis of the Air Quality Model Evaluation International Initiative (AQMEII) Phase 1 air quality simulations, 388
Holmes, H.A.
Investigation of time-resolved atmospheric conditions and indoor/outdoor particulate matter concentrations in homes with gas and biomass cook stoves in Nogales, Sonora, Mexico, 759
Homma, J.
Difference in concentration trends of airborne particulate matter during rush hour on weekdays and Sundays in Tokyo, Japan, 1045
Hong, G.-B.
Carbon dioxide adsorption on amine-impregnated mesoporous materials prepared from spent quartz sand, 827
Study on particulates and volatile organic compounds removal with TiO2 nonwoven filter prepared by electrospinning, 738
Hong, S.K.
Recovering valuable metals from recycled photovoltaic modules, 797
Hopke, P.K.
Trivalent chromium solubility and its influence on quantification of hexavalent chromium in ambient particulate matter using EPA method 6800, 1438
Horng, J.-J.
Improving the indoor air quality of respiratory type of medical facility by zeolite filtering, 13
Hort, C.
A hybrid biological process of indoor air treatment for toluene removal, 1402
Hosseini, S.
Effect of low-density polyethylene on smoke emissions from burning of simulated debris piles, 690
Howard-Reed, C.
Diffusion-controlled toluene reference material for VOC emissions testing: International interlaboratory study, 468
Hseu, Z.-Y.
Effects of remediation train sequence on decontamination of heavy metal-contaminated soil containing mercury, 1013
Hsi, H.-C.
Effects of remediation train sequence on decontamination of heavy metal-contaminated soil containing mercury, 1013
Hsu, Y.-H.
Preparation of needle trap samplers to extract air compounds from indoor electric-vaporizing sources, 488
Hu, S.-C.
Application of magnetically modified sewage sludge ash (SSA) in ionic dye adsorption, 141
Hu, S.-H.
Application of magnetically modified sewage sludge ash (SSA) in ionic dye adsorption, 141
Huang R.
A model for interprovincial air pollution control based on futures prices, 552
Huang, G.H.
An integrated simulation and optimization approach for managing human health risks of atmospheric pollutants by coal-fired power plants, 704
Huang, L.
Trivalent chromium solubility and its influence on quantification of hexavalent chromium in ambient particulate matter using EPA method 6800, 1438
Huang, M.
Toward verifying fossil fuel CO2 emissions with the CMAQ model: Motivation, model description and initial simulation, 419
Huang, R.-J.
Characterization and seasonal variations of levoglucosan in fine particulate matter in Xi’an, China, 1317
Huang, Y.-T.
Effects of remediation train sequence on decontamination of heavy metal-contaminated soil containing mercury, 1013
Hung, M.-J.
Simultaneous removal of sulfur dioxide and polycyclic aromatic hydrocarbons from incineration flue gas using activated carbon fibers, 1038
Hwang, D.
Identification of the sources of PM10 in a subway tunnel using positive matrix factorization, 1360
Hwang, I.-H.
Decomposition of organochlorine compounds in flue gas frommunicipal solidwaste incinerators using natural and activated acid clays, 1021
Hwang, T.
Freight shipment modal split and its environmental impacts: An exploratory study, 2
Hwang, Y.
Outdoor tobacco smoke exposure at the perimeter of a tobacco-free university, 863
Ianniello, A.
Sources of atmospheric nitrous acid: State of the science, current research needs, and future prospects, 1232
Ikeda, K.
Influence of model grid resolution on NO2 vertical column densities over East Asia, 436
Sensitivity analysis of source regions to PM2.5 concentration at Fukue Island, Japan, 445
Inoue, M.
Difference in concentration trends of airborne particulate matter during rush hour on weekdays and Sundays in Tokyo, Japan, 1045
Ip, H.S.S.
Evaluation of hazardous airborne carbonyls on a university campus in southern China, 903
Irie, H.
Influence of model grid resolution on NO2 vertical column densities over East Asia, 436
Irwan, D.
Modeling of methane oxidation in landfill cover soil using an artificial neural network, 150
Irwin, J.S.
A suggested method for dispersion model evaluation, 255
Izzotti, A.
Indoor pollution and burning practices in wood stove management, 1309
Jayanty, R.K.M.
Major ionic compositions of fine particulate matter in an animal feeding operation facility and its vicinity, 1279
United States National PM2.5 Chemical Speciation Monitoring Networks—CSN and IMPROVE: Description of networks, 1409
Jayawardene, I.
Evaluating the capabilities of Aerosol-to-Liquid Particle Extraction System (ALPXS)/ICP-MS for monitoring trace metals in indoor air, 1028
Jeon, J.-S.
Installation of platform screen doors and their impact on indoor air quality: Seoul subway trains, 1054
Jiang, J.-R.
Preparation of needle trap samplers to extract air compounds from indoor electric-vaporizing sources, 488
Jiang, R.-T.
Outdoor fine and ultrafine particle measurements at six bus stops with smoking on two California arterial highways—Results of a pilot study, 47
Jing, Y.H.
Photocatalytic reduction of carbon dioxide to methanol and formic acid by graphene-TiO2, 578
Johnsen, D.L.
Open burning and open detonation PM10 mass emission factor measurements with optical remote sensing, 227
Johnson, A
An uncertainty analysis of mean flow velocity measurements used to quantify emissions from stationary sources, 679
Johnson, J.
Future year ozone source attribution modeling studies for the eastern and western United States, 1174
Implementation and application of sub-grid-scale plume treatment in the latest version of EPA’s third-generation air quality model, CMAQ 5.01, 453
Johnson, T.
Concentrations of mobile source air pollutants in urban microenvironments, 743
Measurement of microenvironmental ozone concentrations in Durham, North Carolina, using a 2B Technologies 205 Federal Equivalent Method monitor and an interference-free 2B Technologies 211 monitor, 360
Jung, H.S.
Effect of low-density polyethylene on smoke emissions from burning of simulated debris piles, 690
Thermal conductivity characteristics of dewatered sewage sludge by thermal hydrolysis reaction, 1383
Jung, Jaegun
Future year ozone source attribution modeling studies for the eastern and western United States, 1174
Jung, Jinsang
Estimating and comparing greenhouse gas emissions with their uncertainties using different methods: A case study for an energy supply utility, 1164
Jung, W.
Identification of the sources of PM10 in a subway tunnel using positive matrix factorization, 1360
Kılıç, Z.
Biosorption properties of zinc(II) from aqueous solutions by Pseudevernia furfuracea (L.) Zopf, 1112
Evaluation of different isotherm models, kinetic, thermodynamic, and copper biosorption efficiency of Lobaria pulmonaria (L.) Hoffm., 115
Kaduwela, A.P.
An extended approach to calculate the ozone relative response factors used in the attainment demonstration for the National Ambient Air Quality Standards, 1204
Kanaya, Y.
Sensitivity analysis of source regions to PM2.5 concentration at Fukue Island, Japan, 445
Kang, J.
A laboratory study of microalgae-based ammonia gas mitigation with potential application for improving air quality in animal production operations, 330
Kang, L.
Laccase production by Phomopsis liquidambari B3 cultured with food waste and wheat straw as the main nitrogen and carbon sources, 1154
Kang, W.
Estimating and comparing greenhouse gas emissions with their uncertainties using different methods: A case study for an energy supply utility, 1164
Karaca, G.
Migration of polycyclic aromatic hydrocarbons (PAHs) in urban treatment sludge to the air during PAH removal applications, 568
Karademir, A.
Siting a municipal solid waste disposal facility, Part II: The effects of external criteria on the final decision, 131
Karamchandani, P.
Evaluation of light-duty vehicle mobile source regulations on ozone concentration trends in 2018 and 2030 in the western and eastern United States, 175
Future year ozone source attribution modeling studies for the eastern and western United States, 1174
Implementation and application of sub-grid-scale plume treatment in the latest version of EPA’s third-generation air quality model, CMAQ 5.01, 453
Karita, K.
Difference in concentration trends of airborne particulate matter during rush hour on weekdays and Sundays in Tokyo, Japan, 1045
Karl, T.R.
Changes in weather and climate extremes: State of knowledge relevant to air and water quality in the United States, 184
Kasisira, L.
Characterization of municipal waste in Kampala, Uganda, 340
Kasperek, J.
Transverse approach between tunnel environment and corrosion: Particulate matter in the Grand Mare tunnel, 198
Katra, I.
Contribution of dust storms to PM10 levels in an urban arid environment, 89
Kemal Korucu, M.
Siting a municipal solid waste disposal facility, Part II: The effects of external criteria on the final decision, 131
Kemme, M.R.
Open burning and open detonation PM10 mass emission factor measurements with optical remote sensing, 227
Kennedy, M.G.
Combined analysis of modeled and monitored SO2 concentrations at a complex smelting facility, 272
Kerr, A.A.F.S.
Analysis of atmospheric aerosol (PM2.5) in Recife city, Brazil, 519
Keskinen, J.
Heavy-duty, off-road diesel engine low-load particle number emissions and particle control, 1186
Khalil, M.A.K.
Annual and weekly patterns of ozone and particulate matter in Jeddah, Saudi Arabia, 817
Kidokoro, T.
Evaluation of light-duty vehicle mobile source regulations on ozone concentration trends in 2018 and 2030 in the western and eastern United States, 175
Future year ozone source attribution modeling studies for the eastern and western United States, 1174
Kim, B.J.
Open burning and open detonation PM10 mass emission factor measurements with optical remote sensing, 227
Kim, D.
Identification of the sources of PM10 in a subway tunnel using positive matrix factorization, 1360
Kim, H.S.
Recovering valuable metals from recycled photovoltaic modules, 797
Kim, J.
Production of granular activated carbon from food-processing wastes (walnut shells and jujube seeds) and its adsorptive properties, 879
Kim, J.-C.
Installation of platform screen doors and their impact on indoor air quality: Seoul subway trains, 1054
Kim, M.J.
Recovering valuable metals from recycled photovoltaic modules, 797
Kim, S.B.
Preparation of electrospun polyurethane filter media and their collection mechanisms for ultrafine particles, 322
Kim, S.H.
Preparation of electrospun polyurethane filter media and their collection mechanisms for ultrafine particles, 322
Kimbrough, S.
Analysis of mobile source air toxics (MSATs)—Near-road VOC and carbonyl concentrations, 349
Kinobe, J.R.
Characterization of municipal waste in Kampala, Uganda, 340
Kinugasa, Y.
Evaluation of light-duty vehicle mobile source regulations on ozone concentration trends in 2018 and 2030 in the western and eastern United States, 175
Future year ozone source attribution modeling studies for the eastern and western United States, 1174
Kleanthous, S.
PM10 concentration levels at an urban and background site in Cyprus: The impact of urban sources and dust storms, 1351
Kleinman, M.T.
Public health and components of particulate matter: The changing assessment of black carbon, 1221
Klemm, R.
Public health and components of particulate matter: The changing assessment of black carbon, 620
Klepeis, N.E.
Outdoor fine and ultrafine particle measurements at six bus stops with smoking on two California arterial highways—Results of a pilot study, 47
Knipping, E.
Emissions Variability Processor (EMVAP): Design, evaluation, and application, 1389
Implementation and application of sub-grid-scale plume treatment in the latest version of EPA’s third-generation air quality model, CMAQ 5.01, 453
Koloutsou-Vakakis, S.
Open burning and open detonation PM10 mass emission factor measurements with optical remote sensing, 227
Komakech, A.J.
Characterization of municipal waste in Kampala, Uganda, 340
Komazaki, Y.
Sensitivity analysis of source regions to PM2.5 concentration at Fukue Island, Japan, 445
Kondo, Y.
Difference in concentration trends of airborne particulate matter during rush hour on weekdays and Sundays in Tokyo, Japan, 1045
Kossin, J.P.
Changes in weather and climate extremes: State of knowledge relevant to air and water quality in the United States, 184
Koutrakis, P.
Contribution of dust storms to PM10 levels in an urban arid environment, 89
PM10 concentration levels at an urban and background site in Cyprus: The impact of urban sources and dust storms, 1351
Krasnov, H.
Contribution of dust storms to PM10 levels in an urban arid environment, 89
Krishna, A.P.
A comprehensive study on landfill site selection for Kolkata City, India, 846
Kukkonen, J.
PM2.5 concentrations in London for 2008–A modeling analysis of contributions from road traffic, 509
Kulkarni, S.
An extended approach to calculate the ozone relative response factors used in the attainment demonstration for the National Ambient Air Quality Standards, 1204
Kumar, N.
Emissions Variability Processor (EMVAP): Design, evaluation, and application, 1389
Kunkel, K.E.
Changes in weather and climate extremes: State of knowledge relevant to air and water quality in the United States, 184
Kuo,Y.-M.
Role of sodium ions in the vitrification process: Glass matrix modification, slag structure depolymerization, and influence of metal immobilization, 774
Kuprov, R.
Composition and secondary formation of fine particulate matter in the Salt Lake Valley: Winter 2009, 957
Kurokawa, J.-i.
Influence of model grid resolution on NO2 vertical column densities over East Asia, 436
Sensitivity analysis of source regions to PM2.5 concentration at Fukue Island, Japan, 445
Kytö, M.
Heavy-duty, off-road diesel engine low-load particle number emissions and particle control, 1186
Lähde, T.
Heavy-duty, off-road diesel engine low-load particle number emissions and particle control, 1186
Lan, J.
Process analysis of a regional air pollution episode over Pearl River Delta Region, China, using the MM5-CMAQ model, 406
Laosiripojana, N.
Synthesis of high-purity Na-A and Na-X zeolite from coal fly ash, 586
Larson, T.V.
Comparison of stack measurement data from R&D facilities to regulatory criteria: A case study from PNNL, 235
Lawrimore, J.H.
Changes in weather and climate extremes: State of knowledge relevant to air and water quality in the United States, 184
Leber, D.
Diffusion-controlled toluene reference material for VOC emissions testing: International interlaboratory study, 468
Lee, H.J.
Installation of platform screen doors and their impact on indoor air quality: Seoul subway trains, 1054
Lee, K.
Identification of the sources of PM10 in a subway tunnel using positive matrix factorization, 1360
Outdoor tobacco smoke exposure at the perimeter of a tobacco-free university, 863
Lee, M.-H.
Preparation of electrospun polyurethane filter media and their collection mechanisms for ultrafine particles, 322
Lee, S.
Estimating and comparing greenhouse gas emissions with their uncertainties using different methods: A case study for an energy supply utility, 1164
Lee, T.
Identification of the sources of PM10 in a subway tunnel using positive matrix factorization, 1360
Lee,Y.
Identification of the sources of PM10 in a subway tunnel using positive matrix factorization, 1360
Lei, H.
Toward verifying fossil fuel CO2 emissions with the CMAQ model: Motivation, model description and initial simulation, 419
Lepage, M.F.
Combined analysis of modeled and monitored SO2 concentrations at a complex smelting facility, 272
Leung, B.
A two-step approach for relating tapered element oscillating microbalance and dichotomous air sampler PM2.5 measurements, 1195
Li, B.
Slightly acidic electrolyzed water for reducing airborne microorganisms in a layer breeding house, 494
Li, C.
A model for interprovincial air pollution control based on futures prices, 552
Li, H.
Recovery of elemental sulfur from zinc concentrate direct leaching residue using atmospheric distillation: A pilot-scale experimental study, 95
Li, L.
Recovery of elemental sulfur from zinc concentrate direct leaching residue using atmospheric distillation: A pilot-scale experimental study, 95
Li, Q.
Classification and comparison of municipal solid waste based on thermochemical characteristics, 597
Li, Q.-F.
Major ionic compositions of fine particulate matter in an animal feeding operation facility and its vicinity, 1279
Li, W.-K.
Simultaneous removal of sulfur dioxide and polycyclic aromatic hydrocarbons from incineration flue gas using activated carbon fibers, 1038
Li, X.
Computational fluid dynamics modeling of laboratory flames and an industrial flare, 1328
The accuracy of two- and three-way positive matrix factorization models: Applying simulated multisite data sets, 1122
Lin, C.
Preparation of needle trap samplers to extract air compounds from indoor electric-vaporizing sources, 488
Lin, C.-F.
Photocatalytic reduction of carbon dioxide to methanol and formic acid by graphene-TiO2, 578
Lin, J.-P.
Improving the indoor air quality of respiratory type of medical facility by zeolite filtering, 13
Lin, W.-Y.
Effects of water-emulsified fuel on a diesel engine generator’s thermal efficiency and exhaust, 970
Lindhjem, C.
Trends in on-road vehicle emissions and ambient air quality in Atlanta, Georgia, USA, from the late 1990s through 2009, 808
Liou, J.-J.
Preparation of needle trap samplers to extract air compounds from indoor electric-vaporizing sources, 488
Little, J.C.
Diffusion-controlled toluene reference material for VOC emissions testing: International interlaboratory study, 468
Liu, H.-t.
Improvement of salinity in sewage sludge compost prior to its utilization as nursery substrate, 546
Liu, L.
Effect of biochar on nitrous oxide emission and its potential mechanisms, 894
Liu, S.
Toward verifying fossil fuel CO2 emissions with the CMAQ model: Motivation, model description and initial simulation, 419
Liu, S.-X.
Characterization and seasonal variations of levoglucosan in fine particulate matter in Xi’an, China, 1317
Liu, Z.
Diffusion-controlled toluene reference material for VOC emissions testing: International interlaboratory study, 468
Major ionic compositions of fine particulate matter in an animal feeding operation facility and its vicinity, 1279
Toward verifying fossil fuel CO2 emissions with the CMAQ model: Motivation, model description and initial simulation, 419
Liu, Z.-S.
Simultaneous removal of sulfur dioxide and polycyclic aromatic hydrocarbons from incineration flue gas using activated carbon fibers, 1038
Long, Y.
Classification and comparison of municipal solid waste based on thermochemical characteristics, 597
López, G.
Particle size distribution and its relationship to black carbon in two urban and one rural site in Santiago de Chile, 785
Lou, H.H.
Computational fluid dynamics modeling of laboratory flames and an industrial flare, 1328
Loughlin, D.H.
Global climate change: The quantifiable sustainability challenge, 979
Lu, J.
Analysis and discussion on formation and control of primary particulate matter generated from coal-fired power plants, 1341
Luengas Munoz, A. T.
A hybrid biological process of indoor air treatment for toluene removal, 1402
Ma, L.
Trends in on-road vehicle emissions and ambient air quality in Atlanta, Georgia, USA, from the late 1990s through 2009, 808
Ma, W.
Recovery of elemental sulfur from zinc concentrate direct leaching residue using atmospheric distillation: A pilot-scale experimental study, 95
Mackie, K.R.
Development of a chemical kinetic model for a biosolids fluidized-bed gasifier and the effects of operating parameters on syngas quality, 160
Majumdar, D.
Emission, speciation, and evaluation of impacts of non-methane volatile organic compounds from open dump site, 834
Mao, J.
Toward verifying fossil fuel CO2 emissions with the CMAQ model: Motivation, model description and initial simulation, 419
Marco da Silva, A.
Identifying problems for choosing suitable areas for installation of a new landfill through GIS technology: A case study, 80
Markwitz, A.
Particulate matter sources on an hourly timescale in a rural community during the winter, 501
Martínez, R.
Particle size distribution and its relationship to black carbon in two urban and one rural site in Santiago de Chile, 785
Mathur, R.
Space-time analysis of the Air Quality Model Evaluation International Initiative (AQMEII) Phase 1 air quality simulations, 388
Matsuo, T.
Decomposition of organochlorine compounds in flue gas frommunicipal solidwaste incinerators using natural and activated acid clays, 1021
Matsuto, T.
Decomposition of organochlorine compounds in flue gas frommunicipal solidwaste incinerators using natural and activated acid clays, 1021
McCarthy, M.C.
Changes in air quality at near-roadway schools after a major freeway expansion in Las Vegas, Nevada, 1003
McDade, C.E.
United States National PM2.5 Chemical Speciation Monitoring Networks—CSN and IMPROVE: Description of Networks, 1409
McMahon, J.R.
Changes in weather and climate extremes: State of knowledge relevant to air and water quality in the United States, 184
Mei, Y.-Z.
Laccase production by Phomopsis liquidambari B3 cultured with food waste and wheat straw as the main nitrogen and carbon sources, 1154
Melly, S.
Childhood asthma acute primary care visits, traffic, and traffic-related pollutants, 561
Meng, A.
Classification and comparison of municipal solid waste based on thermochemical characteristics, 597
Michelsen, H.A.
Toward verifying fossil fuel CO2 emissions with the CMAQ model: Motivation, model description and initial simulation, 419
Miller, J.W.
Effect of low-density polyethylene on smoke emissions from burning of simulated debris piles, 690
Minoura, H.
Evaluation of light-duty vehicle mobile source regulations on ozone concentration trends in 2018 and 2030 in the western and eastern United States, 175
Future year ozone source attribution modeling studies for the eastern and western United States, 1174
Mokhtar, M.M.
Understanding selected trace elements behavior in a coal-fired power plant in Malaysia for assessment of abatement technologies, 867
Moore, E.
An uncertainty analysis of mean flow velocity measurements used to quantify emissions from stationary sources, 679
Mori, Y.
Sensitivity analyses of factors influencing CMAQ performance for fine particulate nitrate, 374
Morikawa, T.
Sensitivity analyses of factors influencing CMAQ performance for fine particulate nitrate, 374
Morino, Y.
Sensitivity analyses of factors influencing CMAQ performance for fine particulate nitrate, 374
Morris, M.P.
Nonvolatile, semivolatile, or volatile: Redefining volatile for volatile organic compounds, 661
Mosca, S.
Assessment of nitrous oxide emission from cement plants: Real data measured with both Fourier transform infrared and nondispersive infrared techniques, 1270
Muniyandi, S. K.
Encapsulation of nonmetallic fractions recovered from printed circuit boards waste with thermoplastic, 1085
Munoz, A.
Improving the correlations of ambient tapered element oscillating microbalance PM2.5 data and SHARP 5030 Federal Equivalent Method in Ontario: A multiple linear regression analysis, 104
Murray, D.R.
Probability analyses of combining background concentrations with model-predicted concentrations, 248
Muzio, L.J.
Laboratory testing of a continuous emissions monitor for hydrochloric acid, 670
Nardocci, A.C.
Airborne polycyclic aromatic hydrocarbons in a medium-sized city affected by preharvest sugarcane burning and inhalation risk for human health, 1130
Nascimento, V.F.
Identifying problems for choosing suitable areas for installation of a new landfill through GIS technology: A case study, 80
Newman, M.B.
Comparative statistical study of hourly precipitation determined by radar-based Stage IV and ground-based methods in the North Central United States, 291
Probability analyses of combining background concentrations with model-predicted concentrations, 248
Ng, L.P.T.
Evaluation of hazardous airborne carbonyls on a university campus in southern China, 903
Nunifu, T.
A two-step approach for relating tapered element oscillating microbalance and dichotomous air sampler PM2.5 measurements, 1195
Ohara, T.
Influence of model grid resolution on NO2 vertical column densities over East Asia, 436
Sensitivity analyses of factors influencing CMAQ performance for fine particulate nitrate, 374
Sensitivity analysis of source regions to PM2.5 concentration at Fukue Island, Japan, 445
Ollison, W.
Concentrations of mobile source air pollutants in urban microenvironments, 743
Measurement of microenvironmental ozone concentrations in Durham, North Carolina, using a 2B Technologies 205 Federal Equivalent Method monitor and an interference-free 2B Technologies 211 monitor, 360
Olsen, S.R.
Evaluation of the SO2 and NOX offset ratio method to account for secondary PM2.5 formation, 265
Olson, N.
Composition and secondary formation of fine particulate matter in the Salt Lake Valley: Winter 2009, 957
Ondarts, M.
A hybrid biological process of indoor air treatment for toluene removal, 1402
Ott, W.R.
Outdoor fine and ultrafine particle measurements at six bus stops with smoking on two California arterial highways—Results of a pilot study, 47
Ouyang, Y.
Freight shipment modal split and its environmental impacts: An exploratory study, 2
Oyola, P.
Particle size distribution and its relationship to black carbon in two urban and one rural site in Santiago de Chile, 785
Paine, R.
Emissions Variability Processor (EMVAP): Design, evaluation, and application, 1389
Palma, T.
Analysis of mobile source air toxics (MSATs)—Near-road VOC and carbonyl concentrations, 349
Pan, K.L.
Direct N2O decomposition over La2NiO4-based perovskite-type oxides, 1260
Pan, X.
Sensitivity analysis of source regions to PM2.5 concentration at Fukue Island, Japan, 445
Panitchakarn, P.
Synthesis of high-purity Na-A and Na-X zeolite from coal fly ash, 586
Pardyjak, E.R.
Investigation of time-resolved atmospheric conditions and indoor/outdoor particulate matter concentrations in homes with gas and biomass cook stoves in Nogales, Sonora, Mexico, 759
Park, D.
Identification of the sources of PM10 in a subway tunnel using positive matrix factorization, 1360
Park, K.J.
Thermal conductivity characteristics of dewatered sewage sludge by thermal hydrolysis reaction, 1383
Paul, K.
A comprehensive study on landfill site selection for Kolkata City, India, 846
Pavasant P.
Synthesis of high-purity Na-A and Na-X zeolite from coal fly ash, 586
Pekney, N.J.
Measurement of atmospheric pollutants associated with oil and natural gas exploration and production activity in Pennsylvania’s Allegheny National Forest, 1062
Peng, L.
Carbon dioxide adsorption on amine-impregnated mesoporous materials prepared from spent quartz sand, 827
Recycling research on spent fluorescent lamps on the basis of extended producer responsibility in China, 1299
Pérez, P.
Particle size distribution and its relationship to black carbon in two urban and one rural site in Santiago de Chile, 785
Perkins, L.
Childhood asthma acute primary care visits, traffic, and traffic-related pollutants, 561
Pesquero, C.R.
Airborne polycyclic aromatic hydrocarbons in a medium-sized city affected by preharvest sugarcane burning and inhalation risk for human health, 1130
Peters, A.
Low emission zones reduce PM10 mass concentrations and diesel soot in German cities, 481
Peterson, T.C.
Changes in weather and climate extremes: State of knowledge relevant to air and water quality in the United States, 184
Piccardo, M.T.
Indoor pollution and burning practices in wood stove management, 1309
Pinto, J.P.
Toward verifying fossil fuel CO2 emissions with the CMAQ model: Motivation, model description and initial simulation, 419
Pisano, J.T.
Laboratory testing of a continuous emissions monitor for hydrochloric acid, 670
Platel, V.
A hybrid biological process of indoor air treatment for toluene removal, 1402
Pollard, A.
Comparison of variability in dioxin and furan data acquired using single train and simultaneous multiple train stack sampling methods, 1093
Pope, R.
A multi-objective assessment of an air quality monitoring network using environmental, economic, and social indicators and GIS-based models, 721
Porter, W.C.
Annual and weekly patterns of ozone and particulate matter in Jeddah, Saudi Arabia, 817
Princiotta, F.T.
Global climate change: The quantifiable sustainability challenge, 979
Qi, L.
Effect of low-density polyethylene on smoke emissions from burning of simulated debris piles, 690
Qian, Z.
Carbon dioxide adsorption on amine-impregnated mesoporous materials prepared from spent quartz sand, 827
Quick, J.C.
Carbon dioxide emission tallies for 210 U.S. coal-fired power plants: A comparison of two accounting methods, 73
Rao, P.S.
Emission, speciation, and evaluation of impacts of non-methane volatile organic compounds from open dump site, 834
Rao, S.T.
Space-time analysis of the Air Quality Model Evaluation International Initiative (AQMEII) Phase 1 air quality simulations, 388
Rasmussen, P.E.
Evaluating the capabilities of Aerosol-to-Liquid Particle Extraction System (ALPXS)/ICP-MS for monitoring trace metals in indoor air, 1028
Ray, S.
Emission, speciation, and evaluation of impacts of non-methane volatile organic compounds from open dump site, 834
Record, R.
Outdoor tobacco smoke exposure at the perimeter of a tobacco-free university, 863
Reeder, M.
Measurement of atmospheric pollutants associated with oil and natural gas exploration and production activity in Pennsylvania’s Allegheny National Forest, 1062
Reguer, A.
A hybrid biological process of indoor air treatment for toluene removal, 1402
Rehbein, P.J.G.
Combined analysis of modeled and monitored SO2 concentrations at a complex smelting facility, 272
Ren, X.
Analysis and discussion on formation and control of primary particulate matter generated from coal-fired power plants, 1341
Reyes, F.
Particle size distribution and its relationship to black carbon in two urban and one rural site in Santiago de Chile, 785
Ribeiro, H.
Airborne polycyclic aromatic hydrocarbons in a medium-sized city affected by preharvest sugarcane burning and inhalation risk for human health, 1130
Rich, A.
An exploratory study of air emissions associated with shale gas development and production in the Barnett Shale, 61
Richardson, P.
Outdoor tobacco smoke exposure at the perimeter of a tobacco-free university, 863
Richmond, P.
Computational fluid dynamics modeling of laboratory flames and an industrial flare, 1328
Rickman, E.E.
United States National PM2.5 Chemical Speciation Monitoring Networks—CSN and IMPROVE: Description of Networks, 1409
Riker, C.
Outdoor tobacco smoke exposure at the perimeter of a tobacco-free university, 863
Roberts, P.T.
Changes in air quality at near-roadway schools after a major freeway expansion in Las Vegas, Nevada, 1003
Robinson, A.L.
Air pollutant emissions from the development, production, and processing of Marcellus Shale natural gas, 19
Rohr, A.
Childhood asthma acute primary care visits, traffic, and traffic-related pollutants, 561
Rood, M.J.
Open burning and open detonation PM10 mass emission factor measurements with optical remote sensing, 227
Roselle, S.
Space-time analysis of the Air Quality Model Evaluation International Initiative (AQMEII) Phase 1 air quality simulations, 388
Rotatori, M.
Assessment of nitrous oxide emission from cement plants: Real data measured with both Fourier transform infrared and nondispersive infrared techniques, 1270
Roy, A.A.
Air pollutant emissions from the development, production, and processing of Marcellus Shale natural gas, 19
Rubio, M.A.
Particle size distribution and its relationship to black carbon in two urban and one rural site in Santiago de Chile, 785
Rupp, E.
Measurement of atmospheric pollutants associated with oil and natural gas exploration and production activity in Pennsylvania’s Allegheny National Forest, 1062
Ryu, I.-C.
Installation of platform screen doors and their impact on indoor air quality: Seoul subway trains, 1054
Sabnis, M.S.
Mobile measurement of methane and hydrogen sulfide at natural gas production site fence lines in the Texas Barnett Shale, 927
Salihoglu, G.
Immobilization of antimony waste slag by applying geopolymerization and stabilization/solidification technologies, 1288
Samarov, D.
Diffusion-controlled toluene reference material for VOC emissions testing: International interlaboratory study, 468
Samburova, V.
Impact of emissions from natural gas production facilities on ambient air quality in the Barnett Shale area: A pilot study, 1368
Sanni, O.
An uncertainty analysis of mean flow velocity measurements used to quantify emissions from stationary sources, 679
Sattler, M.L.
An exploratory study of air emissions associated with shale gas development and production in the Barnett Shale, 61
Mobile measurement of methane and hydrogen sulfide at natural gas production site fence lines in the Texas Barnett Shale, 927
Schlesinger, R.B.
Public health and components of particulate matter: The changing assessment of black carbon, 620
Schwalm, C.R.
Toward verifying fossil fuel CO2 emissions with the CMAQ model: Motivation, model description and initial simulation, 419
Schwartz, J.
PM10 concentration levels at an urban and background site in Cyprus: The impact of urban sources and dust storms, 1351
Shah, S.B.
Major ionic compositions of fine particulate matter in an animal feeding operation facility and its vicinity, 1279
Shah, T.
Future year ozone source attribution modeling studies for the eastern and western United States, 1174
Shang, G.
Effect of biochar on nitrous oxide emission and its potential mechanisms, 894
Sheesley, R.J.
Urban impacts on regional carbonaceous aerosols: Case study in central Texas, 917
Shen, G.
Effect of biochar on nitrous oxide emission and its potential mechanisms, 894
Shen, J.-H.
Improving the indoor air quality of respiratory type of medical facility by zeolite filtering, 13
Shen, Z.-X.
Characterization and seasonal variations of levoglucosan in fine particulate matter in Xi’an, China, 1317
Shi, G.-L.
The accuracy of two- and three-way positive matrix factorization models: Applying simulated multisite data sets, 1122
Shi, X.
Toward verifying fossil fuel CO2 emissions with the CMAQ model: Motivation, model description and initial simulation, 419
Shimadera, H.
Sensitivity analyses of factors influencing CMAQ performance for fine particulate nitrate, 374
Shin, J.Y.
Trivalent chromium solubility and its influence on quantification of hexavalent chromium in ambient particulate matter using EPA method 6800, 1438
Shiue, A.
Carbon dioxide adsorption on amine-impregnated mesoporous materials prepared from spent quartz sand, 827
Shiva Nagendra, S.M.
Characterizing and predicting coarse and fine particulates in classrooms located close to an urban roadway, 945
Shrivastava, M.
Effect of low-density polyethylene on smoke emissions from burning of simulated debris piles, 690
Sinclair, A.H.
Childhood asthma acute primary care visits, traffic, and traffic-related pollutants, 561
Singh, K.D.
Computational fluid dynamics modeling of laboratory flames and an industrial flare, 1328
Singh, V.
PM2.5 concentrations in London for 2008–A modeling analysis of contributions from road traffic, 509
Soares, N.S.
Airborne polycyclic aromatic hydrocarbons in a medium-sized city affected by preharvest sugarcane burning and inhalation risk for human health, 1130
Sochard, S.
A hybrid biological process of indoor air treatment for toluene removal, 1402
Söderström, C.
Heavy-duty, off-road diesel engine low-load particle number emissions and particle control, 1186
Soentgen, J.
Low emission zones reduce PM10 mass concentrations and diesel soot in German cities, 481
Sofowote, U.
Improving the correlations of ambient tapered element oscillating microbalance PM2.5 data and SHARP 5030 Federal Equivalent Method in Ontario: A multiple linear regression analysis, 104
Sohaili, J.
Encapsulation of nonmetallic fractions recovered from printed circuit boards waste with thermoplastic, 1085
Sokhi, R.S.
PM2.5 concentrations in London for 2008–A modeling analysis of contributions from road traffic, 509
Solomon, P.A.
United States National PM2.5 Chemical Speciation Monitoring Networks—CSN and IMPROVE: Description of Networks, 1409
Son, Y.-S.
Installation of platform screen doors and their impact on indoor air quality: Seoul subway trains, 1054
Song, H.W.
Thermal conductivity characteristics of dewatered sewage sludge by thermal hydrolysis reaction, 1383
Sonntag, D.B.
Particulate matter speciation profiles for light-duty gasoline vehicles in the United States, 529
Sonoda, Y.
Evaluation of light-duty vehicle mobile source regulations on ozone concentration trends in 2018 and 2030 in the western and eastern United States, 175
Future year ozone source attribution modeling studies for the eastern and western United States, 1174
Sorial, G.A.
Treatment of hydrophobic VOCs in trickling bed air biofilter: Emphasis on long-term effect of initial alternate use of hydrophilic VOCs and microbial species evolution, 1102
Spataro, F.
Sources of atmospheric nitrous acid: State of the science, current research needs, and future prospects, 1232
Spengler, J.
Childhood asthma acute primary care visits, traffic, and traffic-related pollutants, 561
Srivastava, A.
Emission, speciation, and evaluation of impacts of non-methane volatile organic compounds from open dump site, 834
Stella, A.
Indoor pollution and burning practices in wood stove management, 1309
Su, Y.
Carbon dioxide adsorption on amine-impregnated mesoporous materials prepared from spent quartz sand, 827
Improving the correlations of ambient tapered element oscillating microbalance PM2.5 data and SHARP 5030 Federal Equivalent Method in Ontario: A multiple linear regression analysis, 104
Sun, M.
Effect of biochar on nitrous oxide emission and its potential mechanisms, 894
Sun, W.
An integrated simulation and optimization approach for managing human health risks of atmospheric pollutants by coal-fired power plants, 704
Sundberg, C.
Characterization of municipal waste in Kampala, Uganda, 340
Syu, J.-Y.
Effects of water-emulsified fuel on a diesel engine generator’s thermal efficiency and exhaust, 970
Szembek, C.
Emissions Variability Processor (EMVAP): Design, evaluation, and application, 1389
Taib, R.M.
Understanding selected trace elements behavior in a coal-fired power plant in Malaysia for assessment of abatement technologies, 867
Takahashi, S.
Decomposition of organochlorine compounds in flue gas frommunicipal solidwaste incinerators using natural and activated acid clays, 1021
Taketani, F.
Sensitivity analysis of source regions to PM2.5 concentration at Fukue Island, Japan, 445
Tamilia, J.
Measurement of atmospheric pollutants associated with oil and natural gas exploration and production activity in Pennsylvania’s Allegheny National Forest, 1062
Tamura, K.
Difference in concentration trends of airborne particulate matter during rush hour on weekdays and Sundays in Tokyo, Japan, 1045
Tan, Q.
An integrated simulation and optimization approach for managing human health risks of atmospheric pollutants by coal-fired power plants, 704
Tasdemir, Y.
Migration of polycyclic aromatic hydrocarbons (PAHs) in urban treatment sludge to the air during PAH removal applications, 568
Teeters E.
Outdoor tobacco smoke exposure at the perimeter of a tobacco-free university, 863
Tian, Y.-Z.
The accuracy of two- and three-way positive matrix factorization models: Applying simulated multisite data sets, 1122
Tolsma, D.
Childhood asthma acute primary care visits, traffic, and traffic-related pollutants, 561
Tran, T.
Recovering valuable metals from recycled photovoltaic modules, 797
Trompetter, W.J.
Particulate matter sources on an hourly timescale in a rural community during the winter, 501
Tseng, C.-H.
Effects of water-emulsified fuel on a diesel engine generator’s thermal efficiency and exhaust, 970
Valerio, F.
Indoor pollution and burning practices in wood stove management, 1309
Vaughn, D.L.
Changes in air quality at near-roadway schools after a major freeway expansion in Las Vegas, Nevada, 1003
Veloski, G.
Measurement of atmospheric pollutants associated with oil and natural gas exploration and production activity in Pennsylvania’s Allegheny National Forest, 1062
Veríssimo, T.G.
Analysis of atmospheric aerosol (PM2.5) in Recife city, Brazil, 519
Vijayaraghavan, K.
Trends in on-road vehicle emissions and ambient air quality in Atlanta, Georgia, USA, from the late 1990s through 2009, 808
Vinnerås, B.
Characterization of municipal waste in Kampala, Uganda, 340
Viriya-umpikul, N.
Synthesis of high-purity Na-A and Na-X zeolite from coal fly ash, 586
Virtanen, A.
Heavy-duty, off-road diesel engine low-load particle number emissions and particle control, 1186
Võ, U.-U.T.
Nonvolatile, semivolatile, or volatile: Redefining volatile for volatile organic compounds, 661
Vose, R.S.
Changes in weather and climate extremes: State of knowledge relevant to air and water quality in the United States, 184
Wang, C.
Slightly acidic electrolyzed water for reducing airborne microorganisms in a layer breeding house, 494
Wang, G.-H.
Characterization and seasonal variations of levoglucosan in fine particulate matter in Xi’an, China, 1317
Wang, J.
The accuracy of two- and three-way positive matrix factorization models: Applying simulated multisite data sets, 1122
Wang, M.
Recovery of elemental sulfur from zinc concentrate direct leaching residue using atmospheric distillation: A pilot-scale experimental study, 95
Wang, T.
A laboratory study of microalgae-based ammonia gas mitigation with potential application for improving air quality in animal production operations, 330
Wang, W.
The accuracy of two- and three-way positive matrix factorization models: Applying simulated multisite data sets, 1122
Wang, X.
Process analysis of a regional air pollution episode over Pearl River Delta Region, China, using the MM5-CMAQ model, 406
Wang, Y.
Recycling research on spent fluorescent lamps on the basis of extended producer responsibility in China, 1299
Wang, Y.-S.
Improving the indoor air quality of respiratory type of medical facility by zeolite filtering, 13
Wang-Li, L.
Major ionic compositions of fine particulate matter in an animal feeding operation facility and its vicinity, 1279
Watson, J.G.
Characterization and seasonal variations of levoglucosan in fine particulate matter in Xi’an, China, 1317
Public health and components of particulate matter: The changing assessment of black carbon, 617
Public health and components of particulate matter: The changing assessment of black carbon, 1221
Weatherburn, D.C.
Particulate matter sources on an hourly timescale in a rural community during the winter, 501
Weber, S.F.
Comparative statistical study of hourly precipitation determined by radar-based Stage IV and ground-based methods in the North Central United States, 291
Wei, W.
Recovery of elemental sulfur from zinc concentrate direct leaching residue using atmospheric distillation: A pilot-scale experimental study, 95
Wei, Y.
Toward verifying fossil fuel CO2 emissions with the CMAQ model: Motivation, model description and initial simulation, 419
Weise, D.R.
Effect of low-density polyethylene on smoke emissions from burning of simulated debris piles, 690
Wen, Z.
A laboratory study of microalgae-based ammonia gas mitigation with potential application for improving air quality in animal production operations, 330
Wendell, D.
Treatment of hydrophobic VOCs in trickling bed air biofilter: Emphasis on long-term effect of initial alternate use of hydrophilic VOCs and microbial species evolution, 1102
Wetzel, A.
Measurement of atmospheric pollutants associated with oil and natural gas exploration and production activity in Pennsylvania’s Allegheny National Forest, 1062
White, R.J.
Comparative statistical study of hourly precipitation determined by radar-based Stage IV and ground-based methods in the North Central United States, 291
Wichmann, H.-E.
Low emission zones reduce PM10 mass concentrations and diesel soot in German cities, 481
Woo, J.
Estimating and comparing greenhouse gas emissions with their uncertainties using different methods: A case study for an energy supply utility, 1164
Woodruff, R.K.
Comparison of stack measurement data from R&D facilities to regulatory criteria: A case study from PNNL, 235
Wu, J.
A multi-objective assessment of an air quality monitoring network using environmental, economic, and social indicators and GIS-based models, 721
Wu, S.
Recovery of elemental sulfur from zinc concentrate direct leaching residue using atmospheric distillation: A pilot-scale experimental study, 95
Wu, S.-H.
Improving the indoor air quality of respiratory type of medical facility by zeolite filtering, 13
Wu, Z.-H.
Preparation of needle trap samplers to extract air compounds from indoor electric-vaporizing sources, 488
Wyzga, R.
Childhood asthma acute primary care visits, traffic, and traffic-related pollutants, 561
Wyzga, R.E.
Public health and components of particulate matter: The changing assessment of black carbon, 1221
Xin, H.
A laboratory study of microalgae-based ammonia gas mitigation with potential application for improving air quality in animal production operations, 330
Inactivation of airborne Enterococcus faecalis and infectious bursal disease virus using a pilot-scale ultraviolet photocatalytic oxidation scrubber, 38
Xue, J.
A model for interprovincial air pollution control based on futures prices, 552
Yamaji, K.
Influence of model grid resolution on NO2 vertical column densities over East Asia, 436
Sensitivity analyses of factors influencing CMAQ performance for fine particulate nitrate, 374
Sensitivity analysis of source regions to PM2.5 concentration at Fukue Island, Japan, 445
Yan, S.Y.
Direct N2O decomposition over La2NiO4-based perovskite-type oxides, 1260
Yan, Y.-L.
Effects of water-emulsified fuel on a diesel engine generator’s thermal efficiency and exhaust, 970
Yanca, C.A.
Particulate matter speciation profiles for light-duty gasoline vehicles in the United States, 529
Yang, T.
Laccase production by Phomopsis liquidambari B3 cultured with food waste and wheat straw as the main nitrogen and carbon sources, 1154
Yang, Z.-Y.
Preparation of needle trap samplers to extract air compounds from indoor electric-vaporizing sources, 488
Yano, E.
Difference in concentration trends of airborne particulate matter during rush hour on weekdays and Sundays in Tokyo, Japan, 1045
Yao, X.
Recovery of elemental sulfur from zinc concentrate direct leaching residue using atmospheric distillation: A pilot-scale experimental study, 95
Yarwood, G.
Implementation and application of sub-grid-scale plume treatment in the latest version of EPA’s third-generation air quality model, CMAQ 5.01, 453
Trends in on-road vehicle emissions and ambient air quality in Atlanta, Georgia, USA, from the late 1990s through 2009, 808
Yi, Y.K.
Recovering valuable metals from recycled photovoltaic modules, 797
Yiallouros, P.K.
PM10 concentration levels at an urban and background site in Cyprus: The impact of urban sources and dust storms, 1351
Yin, X.
Changes in weather and climate extremes: State of knowledge relevant to air and water quality in the United States, 184
Younes, M.K.
Modeling of methane oxidation in landfill cover soil using an artificial neural network, 150
Yu, C.H.
Trivalent chromium solubility and its influence on quantification of hexavalent chromium in ambient particulate matter using EPA method 6800, 1438
Yu, S.J.
Direct N2O decomposition over La2NiO4-based perovskite-type oxides, 1260
Yu, W.
Process analysis of a regional air pollution episode over Pearl River Delta Region, China, using the MM5-CMAQ model, 406
Yuen, W.
Open burning and open detonation PM10 mass emission factor measurements with optical remote sensing, 227
Zehraoui, A.
Treatment of hydrophobic VOCs in trickling bed air biofilter: Emphasis on long-term effect of initial alternate use of hydrophilic VOCs and microbial species evolution, 1102
Zell, S.E.
Comparative statistical study of hourly precipitation determined by radar-based Stage IV and ground-based methods in the North Central United States, 291
Zeng, T.
Toward verifying fossil fuel CO2 emissions with the CMAQ model: Motivation, model description and initial simulation, 419
Zhang, Q.
Photocatalytic reduction of carbon dioxide to methanol and formic acid by graphene-TiO2, 578
Slightly acidic electrolyzed water for reducing airborne microorganisms in a layer breeding house, 494
Zhang, T.
Characterization and seasonal variations of levoglucosan in fine particulate matter in Xi’an, China, 1317
Zhang, Y.
Classification and comparison of municipal solid waste based on thermochemical characteristics, 597
Zhao, C.
Toward verifying fossil fuel CO2 emissions with the CMAQ model: Motivation, model description and initial simulation, 419
Zhao, L.
A model for interprovincial air pollution control based on futures prices, 552
Zhao, Y.
Inactivation of airborne Enterococcus faecalis and infectious bursal disease virus using a pilot-scale ultraviolet photocatalytic oxidation scrubber, 38
Zheng, G.-d.
Improvement of salinity in sewage sludge compost prior to its utilization as nursery substrate, 546
Zhou, H.
Classification and comparison of municipal solid waste based on thermochemical characteristics, 597
Zhou, J.
Laccase production by Phomopsis liquidambari B3 cultured with food waste and wheat straw as the main nitrogen and carbon sources, 1154
Zhou, X.-Y.
The accuracy of two- and three-way positive matrix factorization models: Applying simulated multisite data sets, 1122
Zielinska, B.
Impact of emissions from natural gas production facilities on ambient air quality in the Barnett Shale area: A pilot study, 1368
Zou, D.
Process analysis of a regional air pollution episode over Pearl River Delta Region, China, using the MM5-CMAQ model, 406