Advanced search
Publication Cover
Science and Technology of Welding and Joining Volume 28, 2023 - Issue 9
Journal homepage
171
Views
0
CrossRef citations to date
0
Altmetric
Research Article

Joining of graphite to Mo using Ti/Cu and Ti/Cu/Nb/Ti/Cu foils

Biao Xua Hubei Key Laboratory of Plasma Chemistry and Advanced Materials, Wuhan Institute of Technology, Wuhan, People’s Republic of ChinaView further author information
,
Ping Huangb Office of Nanjing Engineering Agency Construction Management, Nanjing, People’s Republic of ChinaView further author information
,
Qianyao Jianga Hubei Key Laboratory of Plasma Chemistry and Advanced Materials, Wuhan Institute of Technology, Wuhan, People’s Republic of ChinaView further author information
,
Julfikar Haiderc Department of Engineering, Manchester Metropolitan University, Manchester, UKView further author information
,
Fahd Nawaz Khand Faculty of Materials and Chemical Engineering, Department of Materials Science, Ghulam Ishaq Khan Institute of Engineering Sciences and Technology, Topi, PakistanView further author information
,
Hongyang Zhaoa Hubei Key Laboratory of Plasma Chemistry and Advanced Materials, Wuhan Institute of Technology, Wuhan, People’s Republic of ChinaView further author information
&
Yangwu Maoa Hubei Key Laboratory of Plasma Chemistry and Advanced Materials, Wuhan Institute of Technology, Wuhan, People’s Republic of China;e Key Laboratory of Green Chemical Engineering Process of Ministry of Education, Wuhan Institute of Technology, Wuhan, People’s Republic of ChinaCorrespondence[email protected]
ORCID Iconhttps://orcid.org/0000-0001-7894-9687View further author information
ORCID Icon show all
Pages 974-982 | Received 14 Jun 2023, Accepted 31 Aug 2023, Published online: 06 Sep 2023
 
Sample our Physical Sciences journals, sign in here to start your FREE access for 14 days

Abstract

Graphite/Mo joining has been carried out using Ti/Cu or Ti/Cu/Nb/Ti/Cu foils. The joining region in the joint using Ti/Cu foils is mainly composed of Ti3Cu4 and TiCu. The joining region using Ti/Cu/Nb/Ti/Cu foils contains a joining zone I, an Nb interlayer and a joining zone II. Both the joining zones I and II are made up of Ti3Cu4 and TiCu. The Nb foil diffuses and dissolves into the liquid fillers during the bonding. The joint using Ti/Cu/Nb/Ti/Cu foils shows higher shear strength than that using Ti/Cu foils, implying the contribution of Nb foil to the joint stress relief and to the joint strength promotion.

Disclosure statement

No potential conflict of interest was reported by the author(s).

Additional information

Funding

This work was supported by the National Natural Science Foundation of China under Grant number 51304148.

Log in via your institution

Access through your institution

Log in to Taylor & Francis Online

Restore content access

Restore content access for purchases made as guest
There are no offers available at the current time.

Related Research

People also read lists articles that other readers of this article have read.

Recommended articles lists articles that we recommend and is powered by our AI driven recommendation engine.

Cited by lists all citing articles based on Crossref citations.
Articles with the Crossref icon will open in a new tab.