Out-of-plane Response of an Innovative Masonry Infill with Sliding Joints from Shaking Table Tests

ABSTRACT

Within the European FP7 Project “INSYSME”, the research unit of the University of Pavia has developed a seismic-resistant masonry infill system with original details, which subdivides the masonry panel into horizontal stripes through the insertion of “sliding joints” and deformable joints at the infill–frame interface. The out-of-plane stability is governed by the flexural/arching resistance of the masonry stripes and adequate supports at the RC columns. An extensive experimental campaign has been performed. In this paper, the results of the out-of-plane dynamic tests on shaking-table conducted on the specimens with and without opening are discussed. These types of tests, never applied before on innovative masonry infill typologies, have involved a very demanding testing protocol, constituted of artificial input motions at increasing intensity. To interpret the test results and provide first indications for safety checks, simplified numerical and analytical simulations of the tests have been conducted. According to the out-of-plane experimental performance of this innovative infill system and to the satisfactory in-plane response, the solution appears to be very promising for real applications.

KEYWORDS:

• Innovative masonry infill
• sliding joints
• out-of-plane response
• shaking table test
• out-of-plane verification

Acknowledgments

The financial support of the European Commission within the project INSYSME “INnovative SYStems for earthquake resistant Masonry Enclosures in rc buildings”, grant FP7-SME-2013-2-GA606229, 2013-2016 is acknowledged. ANDIL and its associated companies, and RUREDIL spa are gratefully acknowledged as industrial partners of the project. The contribution of Capaccioli srl for the supply of the sliding joints is also acknowledged.

Additional information

Funding

The financial support of the European Commission within the project INSYSME “INnovative SYStems for earthquake resistant Masonry Enclosures in RC buildings”, grant FP7-SME-2013-2-GA606229, 2013-2016 is acknowledged.