Durability of reclaimed asphalt pavement–coal fly ash–carbide lime blends under severe environmental conditions

Abstract

The sustainable use of industrial residue in enhancing the long-term performance of reclaimed asphalt pavement (RAP) has been proven to be effective under freeze–thaw and wet–dry conditions. This study focuses on coal fly ash (FA) and carbide lime (CL) as the enhancing agents. It evaluates how the durability and long-term performance of compacted RAP–FA–CL mixtures are impacted by dry unit weight and lime content. The tested mixture’s specimens were moulded in three layers through static compaction inside a cylindrical mould. Several single-level variables were used in the stabilisation process. Among these were: FA content of 25%, optimum water content of 9% (modified effort) and seven days of curing. Additionally, three target dry unit weights (17, 18 and 19 kN/m³ – the last of which was determined using the modified Proctor energy) and three percentages of lime content (3%, 5% and 7%) were used for a comparative analysis. The tested specimens’ accumulated loss of mass (after wetting–drying and freezing–thawing cycles) and splitting tensile strength were both evaluated as a function of the porosity/lime index. The experiments revealed that compacted RAP–coal FA–CL mixtures performed noticeably worse when subjected to freezing–thawing cycles than when subjected to wetting–drying cycles. These results indicate an increase in the breadth of the porosity/lime index, as it is shown to control the long-term performance of compacted RAP–coal FA–CL mixtures, in addition to controlling their mechanical response.

Keywords:

• reclaimed asphalt pavement
• long-term performance
• industrial by-products
• soil stabilisation
• and porosity/lime index

Additional information

Funding

The authors desire to express their gratitude to Edital 12/2014 FAPERGS/CNPq – PRONEX (project # 16/2551-0000469-2) and CNPq (INCT-REAGEO and Produtividade em Pesquisa) for funding the research group.