Synthesis, antimicrobial, anti-biofilm evaluation, and molecular modelling study of new chalcone linked amines derivatives

Abstract

A series of amide chalcones conjugated with different secondary amines were synthesised and characterised by different spectroscopic techniques ¹H NMR, ¹³C NMR, and ESI-MS. They were screened for in vitro antibacterial activity. Compounds 36, 37, 38, 42, and 44 are the most active among the synthesised series exhibiting MIC value of 2.0–10.0 µg/ml against different bacterial strains. Compound 36 was equipotent to the standard drug Ampicillin displaying MBC value of 2.0 µg/ml against the bacterial strain Staphylococcus aureus. The products were screened for anti-biofilm activity. Compounds 36, 37, and 38 exhibited promising anti-biofilm activity with IC₅₀ value ranges from 2.4 to 8.6 µg. Molecular modelling was performed suggesting parameters of signalling anti-biofilm mechanism. AspB327 HisB340 (arene–arene interaction) and IleB328 amino acid residues seemed of higher importance to inhibit c-di-GMP. Hydrophobicity may be crucial for activity. ADME calculations suggested that compounds 36, 37, and 38 could be used as good orally absorbed anti-biofilm agents.

Graphical Abstract

Keywords:

• Chalcones linked amines
• antimicrobial/anti-biofilm activity
• c-di-GMP inhibition
• molecular modelling

Introduction

Human struggle against the affliction of infectious diseases is eternal. The contemporary treatment of infectious diseases involves administration of a multidrug regimen over a long period of time has led to the rapid emergence of multidrug-resistant strains plus a high level of patient non-compliance^1,2. Biofilms are multicellular bacterial communities encased in an extracellular matrix. Biofilms have been estimated by the National Institutes of Health to be associated with 80% of all bacterial infections^3,4. It was recently estimated that biofilm-based disease is responsible for 19 million infections annually in the US, resulting in hundreds of thousands of fatalities and billions of dollars in medical expenses⁵. Increased antibiotic tolerance has been promoted by biofilm formation to levels 1000 times greater than those observed in planktonic bacteria. Moreover, chronic infections, such as lung pneumonia of cystic fibrosis patients, otitis media, non-healing wounds, and contamination of artificial medical implants, are also associated with biofilm formation that leads to inefficient treatment of these infections.

The second messenger cyclic di-GMP (c-di-GMP) has recently emerged as a novel signal that controls biofilm formation and represses motility. Synthesis of c-di-GMP occurs via diguanylate cyclase (DGC) enzymes encoding GGDEF domains, while degradation of c-di-GMP occurs via phosphodiesterase (PDE) enzymes^6,7. Analysis of bacterial genome sequences revealed that enzymes predicted to synthesize or degrade c-diGMP are found in 85% of all bacteria, including many prominent human pathogens. Deletion of active DGCs completely abolishes biofilm formation, suggesting c-di-GMP is essential for this process in bacteria that utilize the signal^8–11.

Chalcone scaffold represents a core unit that exhibits various biological activities especially highlighting antimicrobial activity. In addition, they present a combinatorial assembly for the synthesis of heterocyclic scaffolds^12–14. Molecular hybridisation is a new concept in drug design and development based on the combination of pharmacophoric moieties of different bioactive substances to produce a new hybrid compound with improved affinity and efficacy when compared to the parent drugs. Additionally, this strategy can result in compounds presenting modified selectivity profile, different and/or dual modes of action and reduced undesired side^15,16. Based on literature survey focusing on both amines and chalcone in one hybrid structure, several derivatives have been identified as potent antimicrobials (Chart 1) and taken as lead compounds for further optimisation^17–20.

Chart 1. The rational design of our synthesised compounds.

Taking all together and as part of on-going research work aimed to the development of small molecules as therapeutic agents^21–24, we have managed to design new amide chalcones/amine hybrids with expected high antimicrobial activity^25,26. Despite the advances in antimicrobial activity evaluation, potent biofilm modulators are still sorely underdeveloped. So herein we report the discovery of a few novel derivatives that possess anti-biofilm activity. In addition, molecular modelling studies are performed to get into a molecular in-depth level. ci-diGMP was targeted as the major cause for biofilm formation to search for the suggested mechanism for the anti-biofilm obtained activity which could pave the way for further anti-biofilm drug discovery.

Experimental section

The synthesis of the designed compounds was performed in Faculty of Pharmacy, Mansoura University, Mansoura, Egypt. The in vitro antimicrobial screening was conducted in the Department of Pharmaceutics and Pharmaceutical Technology (Microbiology), College of Pharmacy, Taibah University, Almadinah Almunawarah, Saudi Arabia. Molecular docking experiments were performed using “Molecular Operating Environment” software on Core i7 workstation. Melting points (°C) were determined on Mettler FP80 melting point apparatus and are uncorrected. All of the new compounds were analysed for C, H and N and agreed with the proposed structures within ±0.4% of the theoretical values. ¹H- and ¹³C-NMR were recorded on a Bruker 500 MHz FT spectrometer (Bruker Daltonics Inc., Billerica, MA); chemical shifts are expressed in δ ppm with reference to TMS. Mass spectral (MS) data were obtained on a Perkin Elmer, Clarus 600 GC/MS and Joel JMS-AX 500 mass spectrometers (Perkin Elmer, Waltham, MA). Thin layer chromatography was performed on pre-coated (0.25 mm) silica gel GF₂₅₄ plates (E. Merck, Germany), compounds were detected with 254 nm UV lamp. Silica gel (60–230 mesh) was employed for routine column chromatography separations. All the fine chemicals and reagents used were purchased from Aldrich Chemicals Co. (St. Louis, MO). Copies of ¹H-NMR and ¹³C-NMR spectra of synthesized compounds are reported in the Supplementary data.

Chemistry

(E)-2-chloro-N-(4-(3-(substituedphenyl)acryloyl)phenyl)acetamides (12–15), (E)-3-chloro-N-(4-(3-(substitutedphenyl)acryloyl)phenyl)propanamides (16–19)

A mixture of 1-(4-aminophenyl)-3-(substitutedphenyl)prop-2-en-1-ones 6–9 (0.01 mol), potassium carbonate (2.07 g, 0.015 mol) in dry toluene (50 ml) was stirred at room temperature, while chloroacetyl chloride (10, 1.7 g, 1.2 ml, 0.015 mol) or 3-chloropropionyl chloride (11, 1.9 g, 1.4 ml, 0.015 mol), was added dropwise. Stirring continued for 36 h, solvent was then removed in vacuo and the residue obtained was triturated with water, filtered, dried, and recrystallised (Table 1).

Table 1. Physicochemical properties of the newly synthesised compounds 12–19 and 20–51.

Compound No.	R	X	n	Yield %	m.p. °C	Molecular formulae^a
12	4-Cl	–	1	68	119–121	C17H13Cl2NO2
13	4-OCH3	–	1	72	137–139	C18H16ClNO3
14	3,4-di(OCH3)	–	1	61	141–143	C19H18ClNO4
15	3,4,5-tri(OCH3)	–	1	52	129–133	C20H20ClNO5
16	4-Cl	–	2	72	133–136	C18H15Cl2NO2
17	4-OCH3	–	2	49	107–109	C19H18ClNO3
18	3,4-di(OCH3)	–	2	38	133–136	C20H20ClNO4
19	3,4,5-tri(OCH3)	–	2	69	136–139	C21H22ClNO5
20	4-Cl	CH2	1	43	149–151	C22H23ClN2O2
21	4-OCH3	CH2	1	54	211–214	C23H26N2O3
22	3,4-di(OCH3)	CH2	1	40	157–160	C24H28N2O4
23	3,4,5-tri(OCH3)	CH2	1	39	163–168	C25H30N2O5
24	4-Cl	O	1	51	142–146	C21H21ClN2O3
25	4-OCH3	O	1	63	182–184	C22H24N2O4
26	3,4-di(OCH3)	O	1	45	151–154	C23H26N2O5
27	3,4,5-tri(OCH3)	O	1	70	154–159	C24H28N2O6
28	4-Cl	N-CH3	1	56	173–177	C22H24ClN3O2
29	4-OCH3	N-CH3	1	62	191–193	C23H27N3O3
30	3,4-di(OCH3)	N-CH3	1	80	184–188	C24H29N3O4
31	3,4,5-tri(OCH3)	N-CH3	1	59	161–164	C25H31N3O5
32	4-Cl	N-C6H5	1	73	168–170	C27H26ClN3O2
33	4-OCH3	N-C6H5	1	52	146–149	C28H29N3O3
34	3,4-di(OCH3)	N-C6H5	1	60	172–178	C29H31N3O4
35	3,4,5-tri(OCH3)	N-C6H5	1	48	169–172	C30H33N3O5
36	4-Cl	CH2	2	39	154–157	C23H25ClN2O2
37	4-OCH3	CH2	2	61	135–139	C24H28N2O3
38	3,4-di(OCH3)	CH2	2	89	166–169	C25H30N2O4
39	3,4,5-tri(OCH3)	CH2	2	58	188–193	C26H32N2O5
40	4-Cl	O	2	37	182–186	C22H23ClN2O3
41	4-OCH3	O	2	74	125–128	C23H26N2O4
42	3,4-di(OCH3)	O	2	84	226–229	C24H28N2O5
43	3,4,5-tri(OCH3)	O	2	52	195–199	C25H30N2O6
44	4-Cl	N-CH3	2	72	204–208	C23H26ClN3O2
45	4-OCH3	N-CH3	2	74	158–163	C24H29N3O3
46	3,4-di(OCH3)	N-CH3	2	63	194–198	C25H31N3O4
47	3,4,5-tri(OCH3)	N-CH3	2	69	234–238	C26H33N3O5
48	4-Cl	N-C6H5	2	54	149–153	C28H28ClN3O2
49	4-OCH3	N-C6H5	2	49	142–145	C29H31N3O3
50	3,4-di(OCH3)	N-C6H5	2	62	182–187	C30H33N3O4
51	3,4,5-tri(OCH3)	N-C6H5	2	58	226–232	C31H35N3O5

^a Analysed for C,H,N; results were within ±0.4% of the theoretical values for the formulae given.

(E)-2-Chloro-N-(4-(3-(4-chlorophenyl)acryloyl)phenyl)acetamide (12)

¹H-NMR (DMSO-d₆) δ 3.62 (brs, 1H, NH), 4.56 (s, 2H, CH₂), 7.53 (d, 2H, J = 8.5 Hz, Ar-H), 7.82 (d, 2H, J = 8.5 Hz, Ar-H), 7.93 (d, 2H, J = 8.5 Hz, Ar-H), 7.96 (s, 1H, Olefinic-H), 8.00 (s, 1H, Olefinic-H), 8.18 (d, 2H, J = 8.0 Hz, Ar-H). ¹³C-NMR δ 40.1, 43.5, 118.7, 122.7, 128.9, 129.9, 130.5, 131.5, 132.7, 133.7, 133.9, 134.9, 137.6, 141.9, 143.0, 165.3, 187.5. MS m/z (%): 333.2 (12.0, M⁺).

(E)-2-Chloro-N-(4-(3-(4-methoxyphenyl)acryloyl)phenyl)acetamide (13)

¹H-NMR (DMSO-d₆) δ 3.84 (s, 3H, OCH₃), 4.28 (s, 2H, CH₂), 7.04 (d, 2H, J = 9.0 Hz, Ar-H), 7.72 (s, 1H, Olefinic-H), 7.80 (s, 1H, Olefinic-H), 7.82 (d, 2H, J = 6.0 Hz, Ar-H), 7.85 (d, 2H, J = 9.0 Hz, Ar-H), 8.15 (d, 2H, J = 8.5 Hz, Ar-H), 10.85 (brs, 1H, NH). ¹³C-NMR δ 40.1, 55.4, 114.4, 118.7, 120.3, 121.8, 128.6, 129.7, 130.7, 131.0, 132.9, 133.7, 139.7, 141.0, 145.7, 146.2, 166.8, 189.3. MS m/z (%): 329.78 (27.4, M⁺).

(E)-2-Chloro-N-(4-(3-(3,4-dimethoxyphenyl)acryloyl)phenyl)acetamide (14)

¹H-NMR (DMSO-d₆) δ 3.83 (s, 3H, OCH₃), 3.88 (s, 3H, OCH₃), 4.39 (s, 2H, CH₂), 7.03 (d, 2H, J = 8.0 Hz, Ar-H), 7.38 (dd, 2H, J = 1.0, 1.5 Hz, Ar-H), 7.54 (s, 1H, Ar-H), 7.68 (s, 1H, Olefinic-H), 7.71 (s, 1H, Olefinic-H), 8.17 (d, 2H, J = 7.5 Hz, Ar-H), 11.09 (s, 1H, NH). ¹³C-NMR δ 40.6, 40.9, 43.6, 55.6, 55.8, 110.7, 111.6, 118.7, 119.5, 123.9, 127.6, 129.8, 132.9, 134.7, 136.2, 143.9, 149.0, 151.2, 187.5. MS m/z (%): 359.8 (9.4, M⁺).

(E)-2-Chloro-N-(4-(3-(3,4,5-trimethoxyphenyl)acryloyl)phenyl)acetamide (15)

¹H-NMR (DMSO-d₆) δ 3.73 (s, 3H, OCH₃), 3.88 (s, 3H, OCH₃), 4.40 (s, 3H, OCH₃), 4.56 (s, 2H, CH₂), 7.24 (s, 1H, Ar-H), 7.68 (s, 1H, Olefinic-H), 7.71 (s, 1H, Olefinic-H), 7.85 (d, 2H, J = 8.5 Hz, Ar-H), 7.92 (s, 1H, Ar-H), 8.21 (d, 2H, J = 8.5 Hz, Ar-H), 11.09 (s, 1H, NH). ¹³C-NMR δ 41.5, 43.6, 55.7, 56.1, 60.1, 106.5, 107.2, 118.7, 121.1, 129.8, 130.3, 132.7, 139.7, 142.8, 143.0, 143.9, 153.1, 165.4, 167.1, 187.6. MS m/z (%): 389.8 (15.9, M⁺).

(E)-3-Chloro-N-(4-(3-(4-chlorophenyl)acryloyl)phenyl)propanamide (16)

¹H-NMR (DMSO-d₆) δ 2.92 (t, 2H, J = 12.5 Hz, CH₂), 3.91 (t, 2H, J = 12.5 Hz, CH₂), 7.55 (d, 2H, J = 8.5 Hz, Ar-H), 7.93 (s, 1H, Olefinic-H), 7.96 (s, 1H, Olefinic-H), 7.97 (d, 2H, J = 8.0 Hz, Ar-H), 8.00 (d, 2H, J = 8.5 Hz, Ar-H), 8.18 (d, 2H, J = 8.0 Hz, Ar-H), 10.70 (s, 1H, NH). ¹³C-NMR δ 40.1, 40.5, 118.8, 122.8, 127.6, 128.3, 128.9, 129.9, 130.5, 130.9, 131.7, 132.2, 133.8, 134.9, 141.9, 143.5, 163.7, 187.4. MS m/z (%): 347.2 (20.3, M⁺).

(E)-3-Chloro-N-(4-(3-(4-methoxyphenyl)acryloyl)phenyl)propanamide (17)

¹H-NMR (DMSO-d₆) δ 2.93 (t, 2H, J = 12.5 Hz, CH₂), 3.83 (s, 3H, OCH₃), 3.90 (t, 2H, J = 12.5 Hz, CH₂), 7.02 (d, 2H, J = 9.0 Hz, Ar-H), 7.68 (s, 1H, Olefinic-H), 7.72 (s, 1H, Olefinic-H), 7.82 (d, 2H, J = 6.5 Hz, Ar-H), 7.85 (d, 2H, J = 8.5 Hz, Ar-H), 8.14 (d, 2H, J = 9.0 Hz, Ar-H), 10.63 (s, 1H, NH). ¹³C-NMR δ 40.1, 40.6, 55.4, 114.4, 118.5, 119.5, 120.3, 122.7, 124.1, 125.9, 127.4, 129.7, 130.7, 132.6, 143.2, 143.3, 161.3, 168.6, 187.4. MS m/z (%): 343.8 (6.1, M⁺).

(E)-3-Chloro-N-(4-(3-(3,4-dimethoxyphenyl)acryloyl)phenyl)propanamide (18)

¹H-NMR (DMSO-d₆) δ 2.92 (t, 2H, J = 12.5 Hz, CH₂), 3.83 (s, 3H, OCH₃), 3.88 (s, 3H, OCH₃), 3.91 (t, 2H, J = 12.5 Hz, CH₂), 7.04 (d, 2H, J = 8.5 Hz, Ar-H), 7.38 (dd, 2H, J = 1.5, 1.5 Hz, Ar-H), 7.55 (s, 1H, Ar-H), 7.68 (s, 1H, Olefinic-H), 7.71 (s, 1H, Olefinic-H), 7.84 (d, 2H, J = 8.0 Hz, Ar-H), 10.63 (s, 1H, NH). ¹³C-NMR δ 40.1, 40.6, 55.6, 55.8, 110.7, 111.6, 118.4, 118.7, 119.5, 123.8, 127.6, 129.7, 131.7, 132.6, 143.2, 143.8, 149.0, 151.2, 168.6, 187.4. MS m/z (%): 373.8 (14.9, M⁺).

(E)-3-Chloro-N-(4-(3-(3,4,5-trimethoxyphenyl)acryloyl)phenyl)propanamid (19)

¹H-NMR (DMSO-d₆) δ 2.93 (t, 2H, J = 12.5 Hz, CH₂), 3.65 (s, 3H, OCH₃), 3.73 (s, 3H, OCH₃), 3.88 (s, 3H, OCH₃), 3.91 (t, 2H, J = 12.5 Hz, CH₂), 7.23 (s, 1H, Ar-H), 7.67 (s, 1H, Olefinic-H), 7.70 (s, 1H, Olefinic-H), 7.85 (d, 2H, J = 8.5 Hz, Ar-H), 7.89 (s, 1H, Ar-H), 8.18 (dd, 2H, J = 5.5, 5.5 Hz, Ar-H), 10.68 (s, 1H, NH). ¹³C-NMR δ 40.1, 40.6, 55.7, 56.1, 60.1, 106.5, 118.4, 118.7, 121.1, 127.6, 129.8, 130.3, 131.7, 132.4, 139.7, 143.4, 143.9, 153.1, 163.7, 168.7, 187.5. MS m/z (%): 403.8 (5.1, M⁺).

(E)-N-(4-(3-(substitutedphenyl)acryloyl)phenyl)-2-(substituted)acetamides (20–35), (E)-N-(4-(3-(substitutedphenyl)acryloyl)phenyl)-3-(substituted)propanamides (36–51)

To a stirred solution of 12–19 (0.01 mol) in dry toluene (50 ml), the appropriate amine (0.04 mol) was added dropwise. The reaction mixture was heated under reflux for 3–5 h. Solvent was then distilled under reduced pressure, the obtained residue was triturated with ice-water, filtered, dried, and recrystallised (Table 1).

(E)-N-(4-(3-(4-Chlorophenyl)acryloyl)phenyl)-2-(piperidin-1-yl)acetamide (20)

¹H-NMR (CDCl₃-d₆) δ 1.58–2.18 (m, 6H, piperidine-H), 2.58 (t, 2H, piperidine-H), 2.84 (t, 2H, piperidine-H), 3.18 (s, 2H, CH₂), 7.40 (d, 2H, J = 9.0 Hz, Ar-H), 7.49 (s, 1H, Olefinic-H), 7.52 (s, 1H, Olefinic-H), 7.59 (d, 2H, J = 7.0 Hz, Ar-H), 7.74 (d, 2H, J = 8.5 Hz, Ar-H), 7.82 (brs, 1H, NH), 8.02 (d, 2H, J = 7.0 Hz, Ar-H). ¹³C-NMR δ 21.3, 22.7, 25.8, 54.5, 56.3, 62.4, 119.2, 122.2, 128.5, 129.3, 129.6, 130.0, 133.5, 133.8, 135.1, 136.0, 136.4, 141.9, 142.9, 143.0, 168.2, 188.7. MS m/z (%): 382.8 (5.0, M⁺).

(E)-N-(4-(3-(4-Methoxyphenyl)acryloyl)phenyl)-2-(piperidin-1-yl)acetamide (21)

¹H-NMR (CDCl₃-d₆) δ 1.61–1.94 (m, 6H, piperidine-H), 3.16 (s, 2H, CH₂), 3.75 (t, 2H, J = 1.5 Hz, piperidine-H), 3.80 (t, 2H, piperidine-H), 3.86 (s, 3H, OCH₃), 6.94 (d, 2H, J = 9.5 Hz, Ar-H), 7.40 (s, 1H, Olefinic-H), 7.43 (s, 1H, Olefinic-H), 7.60 (d, 2H, J = 7.5 Hz, Ar-H), 7.80 (d, 2H, J = 8.0 Hz, Ar-H), 7.86 (brs, 1H, NH), 8.02 (d, 2H, J = 7.0 Hz, Ar-H). ¹³C-NMR δ 24.1, 25.3, 25.7, 55.3, 55.5, 56.7, 113.7, 114.4, 116.0, 116.8, 118.2, 119.3, 119.5, 122.2, 127.7, 129.6, 129.8, 130.3, 131.6, 141.5, 144.5, 161.7, 189.1. MS m/z (%): 378.4 (31.6, M⁺).

(E)-N-(4-(3-(3,4-Dimethoxyphenyl)acryloyl)phenyl)-2-(piperidin-1-yl)acetamide (22)

¹H-NMR (CDCl₃-d₆) δ 1.61–3.18 (m, 10H, piperidine-H), 3.21(s, 2H, CH₂), 3.86 (s, 3H, OCH₃), 3.94 (s, 3H, OCH₃), 7.11 (d, 2H, J = 8.5 Hz, Ar-H), 7.45 (s, 1H, Olefinic-H), 7.51 (s, 1H, Olefinic-H), 7.63 (s, 1H, Ar-H), 7.88 (d, 2H, J = 8.0 Hz, Ar-H), 7.95 (d, 2H, J = 7.0 Hz, Ar-H), 10.98 (brs, 1H, NH). ¹³C-NMR δ 23.8, 24.1, 25.3, 25.9, 53.2, 54.6, 56.8, 63.1, 110.2, 111.4, 118.3, 119.3, 121.4, 122.9, 128.0, 128.9, 129.9, 135.6, 137.3, 139.5, 146.0, 156.3, 168.2, 188.4. MS m/z (%): 408.5 (22.6, M⁺).

(E)-2-(Piperidin-1-yl)-N-(4-(3-(3,4,5-trimethoxyphenyl)acryloyl)phenyl)acetamide (23)

¹H-NMR (CDCl₃-d₆) δ 1.57–3.06 (m, 10H, piperidine-H), 3.71 (s, 2H, CH₂), 3.88 (s, 3H, OCH₃), 3.91 (s, 3H, OCH₃), 4.00 (s, 3H, OCH₃), 7.32 (s, 1H, Olefinic-H), 7.40 (s, 1H, Olefinic-H), 7.51 (s, 1H, Ar-H), 7.74 (d, 2H, J = 8.5 Hz, Ar-H), 7.81 (s, 1H, Ar-H), 8.01 (d, 2H, J = 8.0 Hz, Ar-H), 11.28 (brs, 1H, NH). MS m/z (%): 438.5 (8.2, M⁺).

(E)-N-(4-(3-(4-Chlorophenyl)acryloyl)phenyl)-2-morpholinoacetamide (24)

¹H-NMR (CDCl₃-d₆) δ 2.58–2.76 (m, 4H, morpholine-H), 3.23–3.40 (m, 4H, morpholine-H), 3.85 (s, 2H, CH₂), 7.40 (d, 2H, J = 8.0 Hz, Ar-H), 7.49 (s, 1H, Olefinic-H), 7.52 (s, 1H, Olefinic-H), 7.59 (d, 2H, J = 7.0 Hz, Ar-H), 7.74 (d, 2H, J = 8.5 Hz, Ar-H), 7.96 (brs, 1H, NH), 8.05 (d, 2H, J = 7.0 Hz, Ar-H). ¹³C-NMR δ 25.7, 26.5, 53.6, 66.6, 118.8, 118.9, 122.1, 128.5, 129.3, 129.6, 130.0, 130.8, 133.5, 133.9, 135.0, 136.4, 139.7, 141.6, 143.1, 164.2, 188.6. MS m/z (%): 384.8 (1.4, M⁺).

(E)-N-(4-(3-(4-Methoxyphenyl)acryloyl)phenyl)-2-morpholinoacetamide (25)

¹H-NMR (CDCl₃-d₆) δ 2.64–2.72 (m, 4H, morpholine-H), 3.55–3.61 (m, 4H, morpholine-H), 3.79 (s, 2H, CH₂), 3.89 (s, 3H, OCH₃), 7.23 (d, 2H, J = 6.5 Hz, Ar-H), 7.42 (s, 1H, Olefinic-H), 7.50 (s, 1H, Olefinic-H), 7.86 (d, 2H, J = 7.0 Hz, Ar-H), 7.94 (d, 2H, J = 8.5 Hz, Ar-H), 8.15 (d, 2H, J = 7.5 Hz, Ar-H), 10.99 (brs, 1H, NH). ¹³C-NMR δ 23.8, 24.6, 46.7, 52.9, 55.6, 62.1, 114.2, 115.1, 117.9, 118.0, 118.8, 119.2, 122.4, 124.0, 126.7, 128.4, 133.0, 135.8, 144.0, 148.2, 156.7, 188.9. MS m/z (%): 380.4 (11.2, M⁺).

(E)-N-(4-(3-(3,4-Dimethoxyphenyl)acryloyl)phenyl)-2-morpholinoacetamide (26)

¹H-NMR (CDCl₃-d₆) δ 2.66–2.71 (m, 4H, morpholine-H), 3.49–3.55 (m, 4H, morpholine-H), 3.67 (s, 3H, OCH₃), 3.80 (s, 2H, CH₂), 3.88 (s, 3H, OCH₃), 7.42 (d, 2H, J = 7.0 Hz, Ar-H), 7.55 (s, 1H, Olefinic-H), 7.64 (s, 1H, Olefinic-H), 7.88 (d, 2H, J = 7.0 Hz, Ar-H), 7.91 (s, 1H, Ar-H), 8.10 (d, 2H, J = 8.5 Hz, Ar-H), 11.45 (brs, 1H, NH). ¹³C-NMR δ 15.3, 23.0, 24.6, 52.3, 55.7, 60.9, 64.7, 113.2, 114.5, 116.8, 118.0, 118.9, 122.4, 123.9, 124.4, 130.1, 133.8, 142.7, 143.6, 148.7, 152.0, 166.7, 189.2. MS m/z (%): 410.4 (32.6, M⁺).

(E)-2-Morpholino-N-(4-(3-(3,4,5-trimethoxyphenyl)acryloyl)phenyl)acetamide (27)

¹H-NMR (CDCl₃-d₆) δ 2.34–2.86 (m, 4H, morpholine-H), 3.43–3.68 (m, 4H, morpholine-H), 3.65 (s, 3H, OCH₃), 3.74 (s, 2H, CH₂), 3.88 (s, 3H, OCH₃), 3.95 (s, 3H, OCH₃), 7.05 (s, 1H, Ar-H), 7.24 (d, 2H, J = 8.0 Hz, Ar-H), 7.45 (s, 1H, Olefinic-H), 7.55 (s, 1H, Ar-H), 7.60 (s, 1H, Olefinic-H), 7.94 (d, 2H, J = 7.0 Hz, Ar-H), 11.25 (brs, 1H, NH). ¹³C-NMR δ 14.9, 15.3, 48.7, 50.2, 55.6, 56.1, 55.9, 66.0, 112.6, 114.3, 115.9, 118.1, 118.9, 122.4, 125.7, 129.1, 133.0, 135.7, 138.4, 140.2, 144.9, 148.2, 159.7, 188.4. MS m/z (%): 440.5 (0.9, M⁺).

(E)-N-(4-(3-(4-Chlorophenyl)acryloyl)phenyl)-2-(4-methylpiperazin-1-yl)acetamide (28)

¹H-NMR (CDCl₃-d₆) δ 1.25 (s, 3H, CH₃), 1.52–1.55 (m, 4H, piperazine-H), 2.04 (t, 2H, piperazine-H), 2.10 (t, 2H, piperazine-H), 3.49 (s, 2H, CH₂), 7.21 (d, 2H, J = 7.5 Hz, Ar-H), 7.42 (s, 1H, Olefinic-H), 7.55 (s, 1H, Olefinic-H), 7.64 (d, 2H, J = 8.0 Hz, Ar-H), 7.85 (d, 2H, J = 8.5 Hz, Ar-H), 8.25 (d, 2H, J = 7.0 Hz, Ar-H), 9.73 (s, 1H, NH). ¹³C-NMR δ 15.2, 25.7, 26.4, 52.9, 55.9, 67.0, 114.6, 116.7, 118.1, 119.4, 121.5, 123.0, 125.9, 126.3, 128.2, 130.4, 134.0, 139.0, 144.2, 148.6, 166.9, 186.9. MS m/z (%): 397.9 (9.5, M⁺).

(E)-N-(4-(3-(4-Methoxyphenyl)acryloyl)phenyl)-2-(4-methylpiperazin-1-yl)acetamide (29)

¹H-NMR (CDCl₃-d₆) δ 1.14 (s, 3H, CH₃), 1.45–1.53 (m, 4H, piperazine-H), 2.11–2.34 (m, 4H, piperazine-H), 3.40 (s, 2H, CH₂), 3.88 (s, 3H, OCH₃), 7.39 (s, 1H, Olefinic-H), 7.50 (d, 2H, J = 8.0 Hz, Ar-H), 7.62 (s, 1H, Olefinic-H), 7.78 (d, 2H, J = 8.0 Hz, Ar-H), 7.84 (d, 2H, J = 8.0 Hz, Ar-H), 8.15 (d, 2H, J = 7.0 Hz, Ar-H), 10.35 (s, 1H, NH). ¹³C-NMR δ 13.5, 23.8, 24.6, 49.1, 52.4, 55.8, 66.0, 112.5, 114.8, 116.0, 118.7, 120.4, 128.1, 130.9, 133.2, 134.6, 138.2, 141.5, 146.1, 148.7, 155.0, 167.8, 189.2. MS m/z (%): 393.4 (13.4, M⁺).

(E)-N-(4-(3-(3,4-dimethoxyphenyl)acryloyl)phenyl)-2-(4-methylpiperazin-1-yl)acetamide (30)

¹H-NMR (CDCl₃-d₆) δ 1.23 (s, 3H, CH₃), 1.21–1.43 (m, 4H, piperazine-H), 2.59–2.73 (m, 4H, piperazine-H), 3.66 (s, 2H, CH₂), 3.88 (s, 3H, OCH₃), 3.94 (s, 3H, OCH₃), 7.41 (s, 1H, Olefinic-H), 7.58 (s, 1H, Ar-H), 7.70 (s, 1H, Olefinic-H), 7.78 (d, 2H, J = 8.5 Hz, Ar-H), 7.89 (d, 2H, J = 8.0 Hz, Ar-H), 8.00 (d, 2H, J = 6.5 Hz, Ar-H), 9.88 (s, 1H, NH). MS m/z (%): 423.5 (8.2, M⁺).

(E)-2-(4-Methylpiperazin-1-yl)-N-(4-(3-(3,4,5-trimethoxyphenyl)acryloyl)phenyl)acetamide (31)

¹H-NMR (CDCl₃-d₆) δ 1.19 (s, 3H, CH₃), 1.22–1.43 (m, 4H, piperazine-H), 2.54–2.72 (m, 4H, piperazine-H), 3.52 (s, 2H, CH₂), 3.88 (s, 3H, OCH₃), 3.94 (s, 3H, OCH₃), 3.99 (s, 3H, OCH₃), 7.33 (s, 1H, Olefinic-H), 7.51 (s, 1H, Ar-H), 7.65 (s, 1H, Olefinic-H), 7.72 (s, 1H, Ar-H), 7.99 (d, 2H, J = 8.0 Hz, Ar-H), 8.03 (d, 2H, J = 6.5 Hz, Ar-H), 11.36 (s, 1H, NH). ¹³C-NMR δ 15.2, 24.9, 25.3, 41.0, 45.7, 55.8, 56.4, 60.1, 66.9, 112.0, 113.9, 115.7, 117.2, 120.4, 125.8, 129.0, 131.5, 132.7, 135.8, 139.4, 144.2, 148.7, 151.7, 167.1, 188.0. MS m/z (%): 453.5 (24.6, M⁺).

(E)-N-(4-(3-(4-Chlorophenyl)acryloyl)phenyl)-2-(4-phenylpiperazin-1-yl)acetamide (32)

¹H-NMR (CDCl₃-d₆) δ 1.39–1.50 (m, 4H, piperazine-H), 2.77–2.84 (m, 4H, piperazine-H), 3.70 (s, 2H, CH₂), 7.41 (s, 1H, Olefinic-H), 7.58 (s, 1H, Olefinic-H), 7.72–7.86 (m, 5H, Ar-H), 7.88 (d, 2H, J = 8.0 Hz, Ar-H), 7.95 (d, 2H, J = 7.5 Hz, Ar-H), 7.95 (d, 2H, J = 7.5 Hz, Ar-H), 8.04 (m, 2H, Ar-H), 10.45 (s, 1H, NH). ¹³C-NMR δ 23.5, 24.1, 44.8, 52.0, 61.4, 112.4, 114.5, 117.9, 118.1, 118.9, 122.0, 123.4, 125.7, 127.1, 128.9, 129.2, 130.5, 132.8, 133.5, 137.0, 141.2, 144.1, 149.6, 157.2, 164.8, 188.0. MS m/z (%): 459.9 (7.5, M⁺).

(E)-N-(4-(3-(4-Methoxyphenyl)acryloyl)phenyl)-2-(4-phenylpiperazin-1-yl)acetamide (33)

¹H-NMR (CDCl₃-d₆) δ 1.35–1.52 (m, 4H, piperazine-H), 2.77–2.82 (m, 4H, piperazine-H), 3.65 (s, 2H, CH₂), 3.73 (s, 3H, OCH₃), 7.22 (s, 1H, Olefinic-H), 7.63 (s, 1H, Olefinic-H), 7.66–7.89 (m, 5H, Ar-H), 7.90 (d, 2H, J = 6.0 Hz, Ar-H), 7.99 (d, 2H, J = 7.5 Hz, Ar-H), 8.09 (m, 4H, Ar-H), 8.12 (d, 2H, J = 9.0 Hz, Ar-H), 9.40 (s, 1H, NH). ¹³C-NMR δ 24.9, 25.8, 48.9, 53.1, 55.9, 65.3, 110.0, 111.9, 113.8, 115.2, 118.9, 120.0, 122.2, 124.3, 127.3, 128.4, 130.6, 131.4, 133.6, 142.9, 147.8, 148.5, 152.0, 152.4, 156.2, 166.4, 187.3. MS m/z (%): 455.5 (21.3, M⁺).

(E)-N-(4-(3-(3,4-dimethoxyphenyl)acryloyl)phenyl)-2-(4-phenylpiperazin-1-yl)acetamide (34)

¹H-NMR (CDCl₃-d₆) δ 1.35–2.62 (m, 8H, piperazine-H), 3.54 (s, 2H, CH₂), 3.76 (s, 3H, OCH₃), 3.90 (s, 3H, OCH₃), 7.34 (s, 1H, Olefinic-H), 7.55 (s, 1H, Ar-H), 7.70 (s, 1H, Olefinic-H), 7.75–7.99 (m, 5H, Ar-H), 8.01 (d, 4H, J = 6.0 Hz, Ar-H), 8.15 (m, 2H, Ar-H), 9.99 (s, 1H, NH). ¹³C-NMR δ 26.8, 27.1, 46.0, 53.9, 55.8, 56.9, 66.3, 111.5, 113.6, 114.9, 115.7, 118.0, 118.7, 120.4, 121.5, 122.7, 124.4, 126.8, 130.6, 131.9, 132.7, 135.0, 141.0, 144.6, 146.8, 150.7, 152.9, 162.0, 188.7. MS m/z (%): 485.5 (20.8, M⁺).

(E)-2-(4-Phenylpiperazin-1-yl)-N-(4-(3-(3,4,5-trimethoxyphenyl)acryloyl)phenyl)acetamide (35)

¹H-NMR (CDCl₃-d₆) δ 1.35–1.68 (m, 4H, piperazine-H), 2.11–2.46 (m, 4H, piperazine-H), 3.50 (s, 2H, CH₂), 3.64 (s, 3H, OCH₃), 3.89 (s, 3H, OCH₃), 4.21 (s, 3H, OCH₃), 6.81 (s, 1H, Olefinic-H), 7.06 (s, 1H, Ar-H), 7.29 (s, 1H, Ar-H), 7.54 (s, 1H, Olefinic-H), 7.61–7.86 (m, 5H, Ar-H), 7.94 (d, 2H, J = 8.0 Hz, Ar-H), 8.06 (d, 2H, J = 8.5 Hz, Ar-H), 10.19 (s, 1H, NH). ¹³C-NMR δ 22.6, 25.7, 41.0, 46.3, 55.8, 56.3, 60.7, 62.4, 110.0, 112.7, 113.5, 115.2, 118.4, 118.7, 118.9, 120.6, 122.4, 124.6, 125.0, 127.9, 130.9, 131.4, 136.0, 141.2, 143.6, 143.9, 155.7, 161.8, 169.0, 189.7. MS m/z (%): 515.6 (10.7, M⁺).

(E)-N-(4-(3-(4-Chlorophenyl)acryloyl)phenyl)-3-(piperidin-1-yl)propanamide (36)

¹H-NMR (CDCl₃-d₆) δ 1.24 (t, 2H, J = 12.0 Hz, CH₂), 1.72–1.76 (m, 4H, piperidine-H), 2.57–2.59 (m, 4H, piperidine-H), 2.72 (t, 2H, piperazine-H), 3.72 (t, 2H, J = 12.5 Hz, CH₂), 7.39 (d, 2H, J = 6.5 Hz, Ar-H), 7.51 (s, 1H, Olefinic-H), 7.53 (s, 1H, Olefinic-H), 7.57 (d, 2H, J = 8.0 Hz, Ar-H), 7.70 (d, 2H, J = 8.0 Hz, Ar-H), 8.08 (d, 2H, J = 8.0 Hz, Ar-H), 11.73 (s, 1H, NH). ¹³C-NMR δ 18.4, 24.1, 26.1, 32.6, 53.7, 54.1, 66.5, 118.8, 118.9, 120.6, 122.3, 126.0, 127.9, 129.2, 129.6, 130.1, 132.9, 133.6, 136.3, 142.7, 143.4, 171.1, 188.6. MS m/z (%): 396.9 (27.5, M⁺).

(E)-N-(4-(3-(4-Methoxyphenyl)acryloyl)phenyl)-3-(piperidin-1-yl)propanamide (37)

¹H-NMR (CDCl₃-d₆) δ 1.65–1.68 (m, 4H, piperidine-H), 1.89–1.93 (m, 6H, piperidine-H), 3.13 (t, 2H, J = 1.5 Hz, CH₂), 3.74 (s, 3H, OCH₃), 3.85 (t, 2H, J = 2.0 Hz, CH₂), 6.75 (d, 2H, J = 7.0 Hz, Ar-H), 6.95 (d, 2H, J = 13.5 Hz, Ar-H), 7.30 (s, 1H, Olefinic-H), 7.40 (s, 1H, Olefinic-H), 7.60 (d, 2H, J = 7.5 Hz, Ar-H), 7.78 (d, 2H, J = 8.0 Hz, Ar-H), 9.43 (s, 1H, NH). ¹³C-NMR δ 22.5, 22.8, 24.2, 31.8, 44.5, 47.5, 53.8, 55.3, 114.1, 114.4, 119.3, 119.5, 119.7, 127.8, 129.2, 129.6, 130.0, 130.4, 133.8, 142.7, 144.1, 161.5, 168.0, 189.2. MS m/z (%): 392.5 (6.1, M⁺).

(E)-3-(Piperidin-1-yl)-N-(4-(3-(3,4,5-trimethoxyphenyl)acryloyl)phenyl)propanamide (38)

¹H-NMR (CDCl₃-d₆) δ 1.23 (t, 4H, J = 6.5 Hz, piperidine-H), 1.74–1.77 (m, 6H, piperidine-H), 2.61 (t, 2H, J = 5.5 Hz, CH₂), 2.76 (t, 2H, J = 4.0 Hz, CH₂), 3.72 (s, 3H, OCH₃), 3.89 (s, 3H, OCH₃) , 7.26 (s, 1H, Ar-H), 7.40 (s, 1H, Olefinic-H), 7.42 (s, 1H, Olefinic-H), 7.70 (d, 2H, J = 7.5 Hz, Ar-H), 7.98 (d, 2H, J = 7.0 Hz, Ar-H), 8.02 (d, 2H, J = 7.0 Hz, Ar-H), 11.65 (brs, 1H, NH). ¹³C-NMR δ 18.5, 23.9, 25.9, 32.6, 53.6, 54.1, 56.3, 58.4, 61.0, 105.6, 114.2, 117.9, 118.8, 118.9, 121.3, 122.6, 127.9, 130.0, 130.6, 133.2, 140.3, 143.2, 144.5, 153.5, 188.9. MS m/z (%): 422.5 (20.7, M⁺).

(E)-3-(Piperidin-1-yl)-N-(4-(3-(3,4,5-trimethoxyphenyl)acryloyl)phenyl)propanamide (39)

¹H-NMR (CDCl₃-d₆) δ 1.20–1.80 (m, 10H, piperidine-H), 2.54 (t, 2H, J = 2.5 Hz, CH₂), 2.81 (t, 2H, J = 2.0 Hz, CH₂), 3.69 (s, 3H, OCH₃), 3.89 (s, 3H, OCH₃) , 3.92 (s, 3H, OCH₃), 7.26 (s, 1H, Ar-H), 7.40 (s, 1H, Olefinic-H), 7.42 (s, 1H, Olefinic-H), 7.52 (s, 1H, Ar-H), 7.70 (d, 2H, J = 7.5 Hz, Ar-H), 8.02 (d, 2H, J = 9.5 Hz, Ar-H), 10.57 (brs, 1H, NH). ¹³C-NMR δ 24.1, 25.4, 28.7, 41.0, 45.7, 55.8, 57.1, 60.3, 62.7, 66.9, 110.3, 112.8, 114.0, 116.7, 118.0, 118.4, 119.5, 120.7, 122.4, 124.9, 128.7, 136.7, 144.8, 153.4, 162.7, 188.7. MS m/z (%): 452.5 (27.5, M⁺).

(E)-N-(4-(3-(4-Chlorophenyl)acryloyl)phenyl)-3-morpholinopropanamide (40)

¹H-NMR (CDCl₃-d₆) δ 1.24–1.59 (m, 4H, morpholine-H), 2.24–2.64 (m, 4H, morpholine-H), 2.74 (t, 2H, J = 1.5 Hz, CH₂), 2.79 (t, 2H, J = 1.5 Hz, CH₂), 7.31 (s, 1H, Olefinic-H), 7.42 (s, 1H, Olefinic-H), 7.95 (d, 4H, J = 7.5 Hz, Ar-H), 8.14 (d, 4H, J = 9.5 Hz, Ar-H), 10.18 (brs, 1H, NH). ¹³C-NMR δ 24.5, 25.9, 41.7, 52.7, 59.1, 61.7, 110.5, 118.7, 119.2, 120.4, 122.4, 130.6, 133.2, 134.7, 136.0, 138.4, 140.5, 143.8, 149.7, 153.7, 164.7, 189.1. MS m/z (%): 398.8 (0.8, M⁺).

(E)-N-(4-(3-(4-Methoxyphenyl)acryloyl)phenyl)-3-morpholinopropanamide (41)

¹H-NMR (CDCl₃-d₆) δ 1.29–1.44 (m, 4H, morpholine-H), 2.53–2.66 (m, 4H, morpholine-H), 2.71 (t, 2H, J = 1.5 Hz, CH₂), 2.82 (t, 2H, J = 1.5 Hz, CH₂), 3.88 (s, 3H, OCH₃), 7.44 (s, 1H, Olefinic-H), 7.53 (s, 1H, Olefinic-H), 7.64 (d, 2H, J = 7.5 Hz, Ar-H), 7.72 (d, 2H, J = 8.0 Hz, Ar-H), 7.94 (d, 2H, J = 7.5 Hz, Ar-H), 8.04 (d, 2H, J = 9.5 Hz, Ar-H), 10.57 (brs, 1H, NH). ¹³C-NMR δ 23.1, 24.7, 43.8, 51.2, 55.8, 59.7, 60.0, 116.7, 118.9, 120.1, 124.0, 126.3, 127.8, 128.4, 130.9, 133.7, 135.2, 139.7, 142.8, 152.0, 158.3, 164.2, 187.2. MS m/z (%): 394.4 (12.3, M⁺).

(E)-N-(4-(3-(3,4-Dimethoxyphenyl)acryloyl)phenyl)-3-morpholinopropanamide (42)

¹H-NMR (CDCl₃-d₆) δ 1.24 (t, 4H, J = 12.0 Hz, morpholine-H), 2.85–3.02 (m, 4H, morpholine-H), 3.72 (t, 2H, J = 2.5 Hz, CH₂), 3.79 (t, 2H, J = 2.0 Hz, CH₂), 3.93 (s, 3H, OCH₃), 3.96 (s, 3H, OCH₃), 7.16 (d, 2H, J = 7.0 Hz, Ar-H), 7.22 (d, 2H, J = 7.5 Hz, Ar-H), 7.37 (s, 1H, Olefinic-H), 7.40 (s, 1H, Olefinic-H), 7.73 (brs, 1H, NH), 7.77 (s, 1H, Ar-H), 8.02 (d, 2H, J = 7.0 Hz, Ar-H). ¹³C-NMR δ 32.1, 52.7, 53.9, 56.0, 56.1, 65.9, 110.1, 111.1, 114.6, 115.2, 116.8, 118.9, 119.0, 119.7, 123.1, 127.9, 129.9, 133.8, 142.4, 144.7, 149.2, 151.4, 166.7, 189.0. MS m/z (%): 424.5 (10.1, M⁺).

(E)-3-Morpholino-N-(4-(3-(3,4,5-trimethoxyphenyl)acryloyl)phenyl)propanamide (43)

¹H-NMR (CDCl₃-d₆) δ 1.22–1.24 (m, 4H, morpholine-H), 1.25–1.27 (m, 4H, morpholine-H), 2.75 (t, 2H, J = 2.0 Hz, CH₂), 2.89 (t, 2H, J = 2.5 Hz, CH₂), 3.81 (s, 3H, OCH₃), 3.90 (s, 3H, OCH₃), 3.92 (s, 3H, OCH₃), 6.86 (s, 1H, Ar-H), 7.03 (s, 1H, Ar-H), 7.39 (d, 2H, J = 8.5 Hz, Ar-H), 7.44 (s, 1H, Olefinic-H), 7.53 (s, 1H, Olefinic-H), 8.00 (d, 2H, J = 7.0 Hz, Ar-H), 10.99 (brs, 1H, NH). ¹³C-NMR δ 18.5, 32.2, 52.8, 53.9, 56.0, 61.0, 66.5, 105.6, 106.9, 110.5, 112.9, 113.4, 117.0, 118.9, 119.0, 121.2, 130.1, 130.5, 133.6, 134.4, 142.7, 144.6, 153.5, 167.9, 188.9. MS m/z (%): 454.5 (13.4, M⁺).

(E)-N-(4-(3-(4-Chlorophenyl)acryloyl)phenyl)-3-(4-methylpiperazin-1-yl)propanamide (44)

¹H-NMR (CDCl₃-d₆) δ 1.15 (s, 3H, CH₃), 1.20–1.29 (m, 4H, piperazine-H), 1.76–1.95 (m, 4H, piperazine-H), 2.54 (t, 2H, J = 1.5 Hz, CH₂), 2.79 (t, 2H, J = 2.0 Hz, CH₂), 7.24 (d, 2H, J = 8.5 Hz, Ar-H), 7.24 (s, 1H, Olefinic-H), 7.42 (s, 1H, Olefinic-H), 7.61 (d, 4H, J = 8.5 Hz, Ar-H), 8.14 (d, 2H, J = 7.5 Hz, Ar-H), 11.63 (brs, 1H, NH). ¹³C-NMR δ 15.2, 23.4, 25.0, 41.3, 49.8, 57.8, 64.9, 112.8, 113.9, 115.0, 118.9, 121.7, 124.0, 127.3, 128.4, 133.9, 136.5, 140.7, 141.2, 144.9, 150.7, 162.4, 186.7. MS m/z (%): 411.9 (22.5, M⁺).

(E)-N-(4-(3-(4-Methoxyphenyl)acryloyl)phenyl)-3-(4-methylpiperazin-1-yl)propanamide (45)

¹H-NMR (CDCl₃-d₆) δ 1.11 (s, 3H, CH₃), 1.25–1.34 (m, 4H, piperazine-H), 1.52–1.71 (m, 4H, piperazine-H), 2.63 (t, 2H, J = 2.5 Hz, CH₂), 2.84 (t, 2H, J = 2.0 Hz, CH₂), 3.87 (s, 3H, OCH₃), 5.34 (s, 1H, NH), 7.21 (s, 1H, Olefinic-H), 7.33 (d, 4H, J = 8.0 Hz, Ar-H), 7.45 (s, 1H, Olefinic-H), 7.94 (d, 4H, J = 8.0 Hz, Ar-H). ¹³C-NMR δ 14.0, 24.2, 26.1, 39.2, 42.8, 55.9, 57.8, 60.4, 112.4, 116.8, 119.4, 121.1, 123.5, 125.0, 127.4, 128.0, 128.9, 133.4, 135.7, 138.7, 141.6, 155.4, 160.9, 189.2. MS m/z (%): 407.5 (1.9, M⁺).

(E)-N-(4-(3-(3,4-Dimethoxyphenyl)acryloyl)phenyl)-3-(4-methylpiperazin-1-yl)propanamide (46)

¹H-NMR (CDCl₃-d₆) δ 1.20 (s, 3H, CH₃), 1.24–1.36 (m, 4H, piperazine-H), 1.47–1.76 (m, 4H, piperazine-H), 2.68 (t, 2H, J = 1.5 Hz, CH₂), 2.89 (t, 2H, J = 2.5 Hz, CH₂), 3.87 (s, 3H, OCH₃), 3.94 (s, 3H, OCH₃), 6.41 (s, 1H, NH), 7.36 (s, 1H, Olefinic-H), 7.49 (d, 2H, J = 6.5 Hz, Ar-H), 7.53 (s, 1H, Ar-H), 7.55 (s, 1H, Olefinic-H), 8.00 (d, 4H, J = 8.0 Hz, Ar-H). MS m/z (%): 437.5 (29.4, M⁺).

(E)-3-(4-Methylpiperazin-1-yl)-N-(4-(3-(3,4,5-trimethoxyphenyl)acryloyl)phenyl)propanamide (47)

¹H-NMR (CDCl₃-d₆) δ 1.17 (s, 3H, CH₃), 1.24–1.76 (m, 8H, piperazine-H), 3.01 (t, 2H, J = 2.5 Hz, CH₂), 3.22 (t, 2H, J = 2.0 Hz, CH₂), 3.89 (s, 3H, OCH₃), 3.94 (s, 3H, OCH₃), 4.15 (s, 3H, OCH₃), 7.40 (s, 1H, Olefinic-H), 7.55 (s, 1H, Ar-H), 7.59 (d, 4H, J = 8.5 Hz, Ar-H), 7.60 (s, 1H, Ar-H), 7.67 (s, 1H, Olefinic-H), 8.41 (s, 1H, NH). ¹³C-NMR δ 11.9, 21.8, 26.7, 37.5, 41.0, 55.8, 56.4, 59.1, 60.7, 64.3, 110.4, 118.7, 118.9, 119.4, 120.7, 123.5, 127.4, 126.8, 129.0, 131.4, 132.7, 146.2, 148.1, 152.0, 164.7, 182.0. MS m/z (%): 467.5 (17.0, M⁺).

(E)-N-(4-(3-(4-Chlorophenyl)acryloyl)phenyl)-3-(4-phenylpiperazin-1-yl)propanamide (48)

¹H-NMR (CDCl₃-d₆) δ 1.24–1.46 (m, 4H, piperazine-H), 1.72–1.99 (m, 4H, piperazine-H), 2.87 (t, 2H, J = 2.5 Hz, CH₂), 3.13 (t, 2H, J = 1.0 Hz, CH₂), 7.23 (s, 1H, Olefinic-H), 7.44 (s, 1H, Olefinic-H), 7.52 (d, 2H, J = 8.5 Hz, Ar-H), 7.60 (d, 2H, J = 8.0 Hz, Ar-H), 7.84 (d, 4H, J = 8.5 Hz, Ar-H), 7.91–8.05 (m, 5H, Ar-H), 10.13 (s, 1H, NH). ¹³C-NMR δ 24.2, 27.5, 41.1, 50.3, 57.8, 60.1, 110.3, 113.6, 115.2, 118.0, 118.9, 120.8, 122.5, 125.1, 127.1, 130.6, 133.7, 137.2, 139.4, 140.2, 143.6, 144.8, 148.6, 150.2, 155.9, 159,0, 164.3, 187.5. MS m/z (%): 473.1 (12.8, M⁺).

(E)-N-(4-(3-(4-Methoxyphenyl)acryloyl)phenyl)-3-(4-phenylpiperazin-1-yl)propanamide (49)

¹H-NMR (CDCl₃-d₆) δ 1.27–1.40 (m, 4H, piperazine-H), 1.69–1.83 (m, 4H, piperazine-H), 3.88 (s, 3H, OCH₃), 2.90 (t, 2H, J = 2.0 Hz, CH₂), 2.95 (t, 2H, J = 1.0 Hz, CH₂), 6.82 (s, 1H, Olefinic-H), 7.49 (s, 1H, Olefinic-H), 7.60 (d, 2H, J = 7.5 Hz, Ar-H), 7.71–7.79 (m, 5H, Ar-H), 7.81 (d, 2H, J = 8.0 Hz, Ar-H), 7.89 (d, 2H, J = 8.0 Hz, Ar-H), 7.96 (d, 2H, J = 8.0 Hz, Ar-H), 11.34 (s, 1H, NH). ¹³C-NMR δ 21.4, 23.6, 41.7, 49.7, 55.9, 60.1, 65.3, 112.4, 115.1, 115.4, 118.1, 119.3, 121.4, 122.0, 125.8, 127.3, 134.6, 139.2, 141.7, 142.5, 144.3, 147.4, 148.0, 150.6, 152.3, 155.2, 158.2, 163.4, 189.4. MS m/z (%): 469.5 (11.0, M⁺).

(E)-N-(4-(3-(3,4-Dimethoxyphenyl)acryloyl)phenyl)-3-(4-phenylpiperazin-1-yl)propanamide (50)

¹H-NMR (CDCl₃-d₆) δ 1.27–1.75 (m, 8H, piperazine-H), 3.85 (s, 3H, OCH₃), 3.89 (s, 3H, OCH₃), 2.79 (t, 2H, J = 2.5 Hz, CH₂), 3.01 (t, 2H, J = 1.5 Hz, CH₂), 7.19 (s, 1H, Olefinic-H), 7.40 (s, 1H, Olefinic-H), 7.55 (d, 2H, J = 8.0 Hz, Ar-H), 7.63 (s, 1H, Ar-H), 7.75–7.99 (m, 5H, Ar-H), 8.01 (d, 2H, J = 8.0 Hz, Ar-H), 8.17 (d, 2H, J = 8.5 Hz, Ar-H), 10.27 (s, 1H, NH). ¹³C-NMR δ 23.4, 25.1, 41.7, 44.5, 55.8, 56.4, 59.1, 66.0, 110.7, 115.9, 117.3, 118.0, 118.9, 121.5, 122.4, 123.8, 125.0, 125.7, 127.9, 129.3, 130.2, 133.7, 139.0, 141.2, 143.6, 147.2, 159.4, 167.2, 189.4. MS m/z (%): 499.6 (32.5, M⁺).

(E)-3-(4-Phenylpiperazin-1-yl)-N-(4-(3-(3,4,5-trimethoxyphenyl)acryloyl)phenyl)propanamide (51)

¹H-NMR (CDCl₃-d₆) δ 1.30–1.64 (m, 8H, piperazine-H), 3.85 (s, 3H, OCH₃), 3.89 (s, 3H, OCH₃), 4.01 (s, 3H, OCH₃), 2.61 (t, 2H, CH₂), 2.96 (t, 2H, CH₂), 7.28 (s, 1H, Olefinic-H), 7.42 (s, 1H, Olefinic-H), 7.54 (s, 1H, Ar-H), 7.64 (s, 1H, Ar-H), 7.69 (d, 2H, J = 7.5 Hz, Ar-H), 7.73–8.06 (m, 5H, Ar-H), 8.11 (d, 2H, J = 8.5 Hz, Ar-H), 11.03 (s, 1H, NH). ¹³C-NMR δ 24.1, 26.8, 43.8, 54.9, 55.8, 56.1, 59.3, 60.7, 64.3, 110.1, 112.5, 116.1, 117.3, 118.9, 121.0, 122.6, 125.5, 126.1, 126.8, 127.6, 129.4, 131.0, 133.7, 135.4, 139.7, 141.2, 143.7, 150.7, 166.9, 184.2. MS m/z (%): 529.6 (29.1, M⁺).

Determination of in vitro antimicrobial activity

The primary screen was carried out using the agar disc-diffusion method²⁷ using Müller–Hinton agar medium. Sterile filter paper discs (8 mm diameter) were moistened with the compound solution in dimethylsulfoxide of specific concentration 200 µg/disc, the antibacterial antibiotic ampicillin, ciprofloxacin, and the antifungal drug Clotrimazole (100 µg/disc), used as positive control, were carefully placed on the agar cultures plates that had been previously inoculated separately with the microorganisms. The plates were incubated at 37 °C, and the clear zone (inhibition zone) around each compound was measured in (mm) the diameter after 24 h in case of bacteria and at 25 °C for 48 h in case of fungi The Minimal inhibitory concentrations (MIC) and the minimal bactericidal concentrations (MBC) for the compounds 36, 37, 38, 42, and 44 against the same microorganisms used in the primary screening were carried out using the microdilution susceptibility method in Müller–Hinton Broth²⁸ The same compounds except 42 and 44 were tested for bio-film activity against Staphylococcus aureus IFO 3060, Micrococcus luteus IFO 3232 and Pseudomonas aeuroginosa IFO 3448 The tested compounds and antimicrobial standard solution were dissolved in dimethylsulfoxide at concentration of 64 µg/ml. The twofold dilutions of the solution were prepared (64, 32, …, 0.5 µg/ml). The microorganism suspensions at 10⁶ CFU/ml (colony forming unit/ml) concentrations were inoculated to the corresponding wells. The plates were incubated at 37 °C for 24 h. The MIC values were determined as the lowest concentration that inhibited the growth of the microorganism and the MBC values were determined by the lowest concentration that killed of the microorganism by re-cultured on solid medium to verify the absence of growth The anti-biofilm activity was done as follows, two-fold serial dilutions of tested compounds were made in sterile 96-well tissue culture plates containing 50 µl of Mueller–Hinton broth per well. A 50 µl of fresh bacterial suspension (1.0 McFarland) was added to each well. Positive control (bacterial cells + broth) and negative control were included. After incubation at 37 °C for 48 h, the biofilm biomass was assayed using the crystal violet staining assay method²⁹. The biofilm inhibition concentration was defined as the lowest concentration of the tested compound that showed 50% inhibition on the biofilm formation.

Molecular modelling

The three-dimensional structures of some selected substituted amide chalcone derivatives, which represent best anti-biofilm inhibitor, in their neutral forms, were built by using the MOE of Chemical Computing Group Inc. software (Montreal, Canada). The Lowest energy conformer of new analogues “global-minima” was docked into the binding pocket of Cyclic di-GMP (c-di-GMP) that is a widely conserved second-messenger Synthesis of c-di-GMP occurs via diguanylate cyclase (DGC) enzymes encoding of c-di-GMP occurs via phosphodiesterase (PDE) enzymes. DGCs is of fundamental importance for c-di-GMP signalling and cellular homeostasis³⁰. It was obtained from the Protein Data Bank of Brookhaven National Laboratory. The hydrogens were added, then enzyme structure was subjected a refinement protocol where the constraints on the enzyme were gradually removed and minimised until the RMSD gradient was 0.01 kcal/mol Å. Energy minimisation was carried out using the molecular mechanics force field “AMBER”. For each quinazoline derivative, energy minimisations (EM) were performed using 1000 steps of steepest descent, followed by conjugate gradient minimisation to a RMSD energy gradient of 0.01 kcal/mol Å. The active site of the enzyme was detected using a radius of 10.0 Å around MTX. The energy of binding was calculated as the difference between the energy of the complex and individual energies of the enzyme and ligand^31–34.

The compounds under study underwent flexible alignment experiment using “Molecular Operating Environment” software (MOE of Chemical Computing Group Inc., on a Core i7 2.3 GHz workstation, Montreal, Canada). The molecules were constructed using the Builder module of MOE. Their geometry was optimised by using the MMFF94 forcefield followed by a flexible alignment using systematic conformational search. The lowest energy aligned conformers were identified. ADMET Calculations were determined using implemented tool in MOE, 2009.10.

Results and discussion

Chemistry

The synthetic strategy to prepare the new target compounds was outlined in Scheme 1. The amino function of 1-(4-aminophenyl)-3-(substituted phenyl)prop-2-en-1-one analogues 6–9 was acylated with either 2-chloroacetyl chloride (10) or 3-chloropropionyl chloride (11) in presence of potassium carbonate in dry toluene to yield (E)-2-chloro-N-(4-(3-(substituedphenyl)acryloyl)phenyl)acetamides (12–15), (E)-3-chloro-N-(4-(3-(substitutedphenyl)acryloyl)phenyl)propanamides (16–19). The ¹H-NMR spectra of the synthesised intermediates (12–15) proved to accommodate the –COCH₂Cl moiety into the structures of 6–9 by the appearance of singlet integrated for two protons at a range of δ 4.28–4.56 ppm depending on the type of substituent on the phenyl ring. The integration of –COCH₂CH₂Cl moiety to produce the intermediates 16–19 was also proved by the appearance of a set of two triplets integrated for four protons at a range of δ 2.92–3.91 ppm. The target compounds 20–51, were obtained by the reaction of the intermediate derivatives 12–19 with a variety of secondary amines in dry toluene (Scheme 1, Table 1). ¹H-NMR spectra proved the inclusion of the secondary amines into the structures of the target compounds. Piperidine appeared as either two sets of triplets multiplets at δ 1.58 and 2.84 or as one multiplet in the range of δ 1.20–3.18 integrated as ten protons; morpholine appeared as two multiplets at δ 1.24, 3.86 ppm integrated for eight protons; piperazines showed either sets of triplets and multiplets at δ 1.52 and 2.10 or two multiplets at δ 1.21–2.84 ppm integrated for eight protons, ¹³C-NMR and Mass spectral analyses confirmed the aforementioned findings.

Scheme 1. Synthesis of the target compounds 20–51.

In vitro antimicrobial activity

The synthesised compounds were tested for their in vitro antimicrobial activity against a panel of standard strains of the Gram-positive bacteria (Staphylococcus aureus IFO 3060, Bacillus subtilis IFO 3007, and Micrococcus luteus IFO 3232), the Gram-negative bacteria (Escherichia coli IFO 3301 and Pseudomonas aeuroginosa IFO 3448), and the pathogenic fungus Candida albicans IFO 0583, Aspergillus oryzae IFO 4177, and Aspergillus niger IFO 4414. The primary screen was carried out using the agar disc-diffusion method²⁷. The results of the preliminary antimicrobial screening of the synthesised compounds are shown in Table 2. The results revealed that the majority of the synthesised compounds showed varying degrees of inhibition against the tested microorganisms. Gram-positive bacteria are considered the most sensitive among the tested microorganisms. Compounds 36, 37, 38, 42, and 44 showed good activity against Gram-positive and fungi. The MIC and MBC for the most active compounds 36, 37, 38, 42, and 44 against the same microorganism used in the primary screening were carried out using the microdilution susceptibility method in Müller–Hinton Broth²⁸ as shown in Table 3. Compounds 36, 37, and 38 show good MIC and MBC against tested organisms. The compounds 36, 37, and 38 show anti-biofilm activity (IC₅₀, µg/ml) against Staphylococcus aureus IFO 3060, Micrococcus luteus IFO 3232, and Pseudomonas aeuroginosa IFO 3448. Compound 36 shows the most potent anti-biofilm activity among all tested compounds as shown in Table 4 using the crystal violet staining assay method³¹.

Table 2. Antimicrobial activity of tested compounds (200 μg/8 mm disc) against Gram positive bacteria (Staphylococcus aureus IFO 3060, Bacillus subtilis IFO 3007, Micrococcus luteus IFO 3232), Gram negative bacteria (Escherichia coli IFO 3301, Pseudomonas aeuroginosa IFO 3448), and Fungi (Candida albicans IFO 0583, Aspergillus oryzae IFO 4177 and Aspergillus niger IFO 4414).

Compound No.	Diameter of inhibition zone (mm)
	Gram positive bacteria			Gram positive bacteria		Fungi
	S. aureus	B. subtilis	M. luteus	E. coli	P. aeuroginosa	C. albicans	A. oryzae	A. niger
20	–	14	11	12	10	–	–	–
21	9	12	10	14	–	10	–	10
22	–	14	–	–	–	11	–	–
23	–	13	12	11	–	10	9	–
24	10	–	–	13	9	13	–	9
25	–	–	12	14	13	–	–	–
26	–	12	–	–	–	–	10	–
27	14	16	15	12	–	–	–	–
28	12	14	–	–	–	12	–	–
29	14	16	–	–	–	–	–	–
30	14	16	12	–	–	–	–	–
31	18	20	16	14	10	–	–	–
32	–	15	–	–	–	–	–	–
33	10	12	10	–	–	–	–	–
34	–	13	–	11	9	–	–	–
35	–	11	–	10	–	–	–	–
36	28	29	24	18	14	20	18	14
37	20	26	22	19	16	21	19	20
38	26	28	21	15	12	20	18	17
39	16	18	14	–	–	–	–	–
40	12	12	–	11	–	10	–	–
41	–	14	–	12	–	–	–	–
42	18	20	16	14	12	18	14	12
43	–	–	–	–	–	–	–	–
44	21	22	20	18	16	12	10	–
45	10	12	–	14	10	10	–	–
46	12	15	10	–	–	–	–	–
47	–	12	–	10	9	11	–	–
48	–	14	–	–	–	–	10	11
49	10	15	10	12	–	12	–	–
50	–	11	–	–	–	–	–	–
51	9	12	–	9	9	9	–	–
Ampicillin	28	30	25	24	22	NT	NT	NT
Ciprofloxacin	34	38	32	38	36	NT	NT	NT
Clotrimazole	NT	NT	NT	NT	NT	21	22	24

– : Not active (8 mm), Weak activity (8–12 mm), Moderate activity (12–15 mm), Strong activity (>15 mm). Solvent: DMSo (8 mm).

Table 3. The Minimal Inhibitory Concentrations (MIC, µg/ml) and Minimal Bactericidal Concentrations (MBC µg/ml) of compounds 36, 37, 38, 42, and 44 in comparison with the broad spectrum antibacterial drug, Ampicillin or Ciprofloxacin, and antifungal drug Clotrimazole against tested microorganism.

Compound No.	S. aureus	B. subtilis	M. luteus	E. coli	P. aeuroginosa	C. albicans	A. oryzae	A. niger
36
MIC	2.0	2.0	4.0	4.0	ND	2.0	4.0	5.0
MBC	4.0	6.0	8.0	8.0	ND	6.0	8.0	10.0
37
MIC	3.0	4.0	4.0	2.0	4.0	3.0	4.0	6.0
MBC	6.0	8.0	9.0	4.0	8.0	6.0	8.0	10.0
38
MIC	2.0	2.0	4.0	ND	ND	3.0	4.0	ND
MBC	6.0	6.0	7.0	ND	ND	6.0	10	ND
42
MIC	8.0	6.0	6.0	ND	ND	4.0	ND	ND
MBC	ND	ND	ND	ND	ND	8.0	ND	ND
44
MIC	4.0	4.0	6.0	4.0	ND	ND	ND	ND
MBC	8.0	8.0	ND	8.0	ND	ND	ND	ND
Ampicillin
MIC	2.0	1.0	2.0	1.0	ND	ND	ND	ND
MBC	4.0	3.0	4.0	3.0	ND	ND	ND	ND
Ciprofloxacin
MIC	0.5	0.5	0.5	0.25	1.0	ND	ND	ND
MBC	1.5	1.0	2.0	1.0	3.0	ND	ND	ND
Clotrimazole
MIC	ND	ND	ND	ND	ND	2.0	3.0	5.0
MBC	ND	ND	ND	ND	ND	5.0	6.0	8.0

ND: not determined.

Table 4. Anti bio-film activity (IC₅₀, µg/ml) of compounds 36, 37, and 38 against Staphylococcus aureus IFO 3060, Micrococcus luteus IFO 3232, and Pseudomonas aeuroginosa IFO 3448.

Compound No.	S. aureus	M. luteus	P. aeuroginosa
36	2.4 ± 0.10	4.8 ± 0.11	7.8 ± 0.24
37	4.9 ± 0.21	5.7 ± 0.26	8.6 ± 0.22
38	2.9 ± 0.16	5.6 ± 0.22	6.4 ± 0.23
Erythromycin	0.45 ± 0.15	0.62 ± 0.11	0.84 ± 0.21

Results are mean values from at least three experiments ± SD.

Structure–activity correlation

Structure–activity correlation, based on the different strains used in the biological screening, revealed that, in general, the propanamide analogues are more active than the acetamide ones 20–35 that proved to be inactive against most of the tested organisms. Some of the acetamide analogues showed moderate activity against gram-positive organisms such as compounds 30 and 31. These compounds are characterised by having multiple methoxy groups in addition to the methyl piperazine moiety that proved to be essential for activity. On the other hand, some of the propanamide derivatives proved active against most of the tested organisms, compounds 36, 37, 38, 42, and 44 are active against gram-positive bacteria, gram-negative bacteria and even the pathogenic fungi. It was revealed that the presence of piperidine moiety favours the activity as in the case of compounds 36, 37, and 38 more than the morpholine moiety in 40 or N-methyl piperazine group in 44. Furthermore, it was observed that the presence of phenylpiperazine moiety did not favour the activity as none of the compounds containing such group showed any kind of activity against the tested organisms.

Molecular modelling study

Molecular docking study

It is becoming evident that c-di-GMP represents a pivotal second messenger which is involved in bacterial virulence-related phenotypes. Therefore, targeting the enzymes involved in c-diGMP synthesis represents an appealing strategy for the development of anti-biofilm drugs. The active site of the DGC domain of PleD from C. crescentus (PDB accession number 2V0N) was used for in silico in-depth study³⁰. The definition of the I-site binding pocket provides an entry point into unravelling the molecular mechanisms of ligand–protein interactions involved in c-di-GMP signalling and makes DGCs a valuable target for drug design to develop new strategies against biofilm-related diseases. Detailed modelling study was carried out to assist the interpretation of the present data and provide information on binding induced mobility, atomistically. The molecular mechanism of product inhibition through I-site binding was quite interesting to be concerned.

Energy minimisation and conformational search study were conducted to compounds under focus represented by 36, 37, and 38 (Figure 1). Docking of anti-biofilm exhibiting derivatives in addition to co-crystallised ligand PleD were used to analyse the structural transitions that occur during I-site binding of c-di-GMP. The reference ligand within the active site has been docked along with the anti-biofilm compounds under focus 36, 37, and 38. A close-up view of ligand binding pocket docked reference showed binding to Arg386, Arg390, Asp362, Thr379, Asp383, and Arg359 via hydrogen bonding interaction (Figure 2). Additional small molecules that previously identified as potent DCG inhibitors were further docked into enzyme along with our compounds to validate our results³⁵. Compound A inhibitor binds through HisB340 amino acid residue via arene–arene interaction, AsnB335 (hydrogen bonding) and Mg metal atom by amino acid network GluB370, IleB328, AspB327 (Figure 3(a)). Compound B inhibitor binds with HisB340 (hydrogen bonding) and Arg A148 (cationic–arene interaction) (Figure 3(b)). Three-dimensional structural complementarities between the protein binding site and the ligands represent one of the important factors determining the binding affinity. Compound 36 HisB340 (arene–arene interaction), Mg…GluB370 hydrogen bonding, IleB328, AspB327 (Figure 4). Compound 37 showed binding via amino acid residues Arg B446 (cationic–arene) in addition a triplet network binding with Mg via carbonyl oxygen through GluB370, IleB328, AspB327 (Figure 5). Compound 38 stick to active site via HisB340 (arene–arene interaction) Asp B344 (hydrogen bonding), Phe B331 (hydrogen bonding), furthermore the connection with Mg via the two methoxy groups oxygen atoms with GluB370, IleB328, AspB327 (Figure 7). Three-dimensional structural complementarities between the protein binding site and the ligands represent one of the important factors determining the binding affinity. In addition, all the tested compounds were bound in the deep cleft of the binding site that was in agreement with the binding location (Figures 4, 6, and 8). This information gave us an understanding of how the compounds act as biofilm inhibitors. General observation of docking results illustrated that the tested chalcone derivatives exhibited preponderant affinity (based on the data of binding affinity). The binding energy of the synthesised compounds showing least energy indicating higher binding to the active site, they showed less energy even than reference compounds A and B (Table 5).

Figure 1. Lowest energy conformers of compound (a) 36, (b) 38, and (c) 37 with balls and cylinders.

Figure 2. 2D binding mode and residues involved in the recognition of reference ligand at active site (c-di-GMP) Arg 386, Arg 390, Asp 362 Thr 379, Asp 383, and Arg 359 via hydrogen bonding interaction.

Figure 3. 2D binding mode and residues involved in the recognition of active biofilm inhibitors (a) Compound A, (b) Compound B, ligands as references at active site (c-di-GMP).

Figure 4. 3D binding mode and residues involved in the recognition of active compound 36 at active site (c-di-GMP).

Figure 5. 3D binding mode and residues involved in the recognition of active compound 37 at active site (c-di-GMP).

Figure 6. The aligned conformation of compound 37 (ball and stick) occupying pocket (space filled).

Figure 7. 3D binding mode and residues involved in the recognition of active compound 38 at active site (c-di-GMP).

Figure 8. The aligned conformation of compound 38 (space filled cyan) occupying pocket c-di-GMP.

Table 5. Docking score of compounds under study.

Compound	Dock score
36	−10.75799
37	−10.61655
38	−13.1454
A	−11.27966
B	−9.757301

Surface mapping

The influence of the substituent group’s physicochemical properties on the activity of the compounds was observed. More specifically, hydrophobicity was found to be directly related to the antimicrobial activity, in agreement with other studies carried out for a different series of nifuroxazide analogues^36–38. A surface map for the active site within c-di-GMP was exported from protein data bank site emphasising about hydrophobicity of the active site (Figure 9). Further investigations were conducted to explore the reasons behind the anti-biofilm formation activity of compounds 36, 37, and 38. Hydrophobic surface mapping study revealed that compounds bearing methoxy and chloro groups showed more lipophilic character (greener regions) and hence were able to achieve more contact with the lipophobic pocket of the enzyme (Figure 10). Moreover, 35 possess a more flat structure which allows the compound to adopt conformation that utilizes more hydrophobic space inside the pocket. The obtained hydrophobic mapping and conformations emphasize a distinct role of hydrophobicity in the potential protein-binding site.

Figure 9. Close-up view of ligand binding pocket crystal structure of the response regulator, within a bound dimer of c-di-GMP which make specific contacts to the ligand in the crystal structure.

Figure 10. Surface map for (a) compound 36, (b) compound 37 and (c) compound 38, Pink, hydrogen bond, blue: mild polar, green hydrophobic.

ADME calculations

Oral bioavailability represents essential role in the production of bioactive molecules into therapeutic agents³⁹. So, it was of great importance to conduct a computational study for the prediction of ADMET properties of compounds 36, 37, and 38 for the determination of topological polar surface area (TPSA), and the “rule of five” formulated by Lipinski⁴⁰ for the activity prediction of an drug-likeness and oral administered drug, if it has no more than one violation in its rules. The calculated descriptors were obtained using the MOE package, and the results are listed in Table 6. The obtained results revealed that the Log P are less than 5.0 for compounds 36, 37, and 38, also the molecular weight was less than 500, hydrogen bond acceptor <10 and hydrogen bond donors <5 which fulfil Lipinski’s rule, number of rotatable bonds less than 10, so all the compounds fulfil Lipinski rule with zero violations except for compound 36 with one violation. In addition, the calculated total polar surface area of all compounds is considered a key property linked to drug bioavailability; the passively absorbed molecules with TPSA >140 have low oral bioavailability, all the tested compounds showed lower TPSA suggesting that compounds they can be used as good orally absorbed anti-biofilm agents with diminished toxicity among the investigated compounds.

Table 6. Pharmacokinetic parameters of compounds 36, 37, and 38.

Compound	Mwt	TPSA	Log P	Lip. don	Lip. acc	Lip. V	b.rotN
36	396.918	49.41	4.761	1	4	1	8
37	392.499	58.64	4.125	1	5	0	9
38	423.533	69.07	3.867	2	6	0	10

TPSA: Polar surface area; Log P: Calculated lipophilicity; Lip. don: Number of hydrogen bond donors; Lip. acc: Number of hydrogen bond acceptors; Lip. V: Number of violations of Lipinski rule; b.rotN: No. of rotatable bond.

Conclusions

The work reported herein provides an insight into the development of novel antimicrobial and anti-biofilm agents effective over wide range pathogenic strains. We have introduced a new class of chalcone/amine hybrid structure employing an efficient simple protocol which was evaluated for both antimicrobial and anti-biofilm activity. All the compounds showed good to moderate inhibitory and bactericidal effects over most of the Gram-positive and Gram-negative bacterial strains, respectively. Furthermore, compounds 36, 37, and 38 were found to be most active against biofilm formation. Their lower cytotoxicities reflect their therapeutic potential for their growth in the field of antimicrobial agents. This study contributes to the emerging understanding of the c-di-GMP regulatory network in bacteria. The current emphasis lies on the identification of some inhibitory molecules, regulatory mechanisms, with the long-term goal in mind of approaching a detailed systems-level understanding of c-di-GMP signalling. Our experiments provide an entry key point into the anti-biofilm mechanism of action using in silico studies such as docking, surface mapping and ADME studies.

Disclosure statement

No potential conflict of interest was reported by the authors.