https://orcid.org/0000-0001-8426-4692
Abstract
A new series of N′-(substituted phenyl)-2-(1-(4-(methylsulfinyl) benzylidene)−5-fluoro-2-methyl-1H-inden-3-yl) acetohydrazide derivatives (1 – 25) were prepared in good yields in an efficient manner. All the compounds were fully characterised by the elemental analysis and spectral data. Synthesised compounds were evaluated for antioxidant activity by DPPH method. Compounds 7 (R = 3-methoxyphenyl), 3 (R = 4-dimethylaminophenyl) and 23 (R = 2,4,5-trimethoxy phenyl) substitutions were found to be having highly potent antioxidant activity. Compound 3, with para dimethylaminophenyl substitution was found to be having highest antioxidant activity. It was further evaluated in vivo for various analgesic, anti-inflammatory, ulcerogenic and COX-2 inhibitory activity in different animal models. Lead compound 3 was found to be significant anti-inflammatory and analgesic agent. It was also evaluated for ulcerogenic activity and demonstrated significant ulcerogenic reduction activity in ethanol and indomethacin model. The LD50 of compound 3 was found to be 131 mg/kg. The animals treated with compound 3 prior to cisplatin treatment resulted in a significant reduction in COX-2 protein expression when compared to cisplatin-treated group. Sulindac derivative with para dimethylaminophenyl substitution was found to be the most potent antioxidant, anti-inflammatory and analgesic agent as well as with significant gastric sparing activity as compared to standard drug sulindac. Compound 3 significantly downregulated liver tissue COX‐2 gene expression.
Introduction
Cyclooxygenase (COX) enzyme catalyses the conversion of arachidonic acid to prostaglandin H2 (PGH2), which is converted to many prostanoids by specific isomerase enzymes because it is an unstable intermediate. Non-beneficial effects of prostaglandins include pain and fever associated with inflammation; beneficial effects include gastro-intestinal protection and platelet function. The COX-1 and COX-2 are the two isoforms, which are regulated differently. The cyto-protection in the gastrointestinal (GI) tract is provided by COX-1 and COX-2 mediates inflammationCitation1.
Non-steroidal anti-inflammatory drugs (NSAIDs) are used to treat pain and inflammation. Side effects include gastrointestinal toxicity such as gastro-duodenal perforations, ulcers and bleeding, ascribed to the inhibition of cyclooxygenase-1 (COX-1). Thus, selective inhibitors of cyclooxygenase-2 (COX-2) were synthesised in an attempt to decrease these side effectsCitation2–6. Physicians would prescribe gastro-protective agents with a conventional NSAID, prior to the introduction of the COX-2 selective inhibitors. Selectively inhibition of COX-2 enzyme would result in the same anti-inflammatory benefits as that of non-selective NSAIDs provide but with less incidences of gastrointestinal side effectsCitation7,Citation8. Some COX-2 inhibitors have also been found to have cardiovascular side effects.
Sulindac is an indene derivative NSAID, known to induce ulceration. New sulindac derivatives are reported as anti-inflammatoryCitation9, anticancerCitation10–12, COX-1 inhibitorsCitation13 and have shown PPAR γ activityCitation14. Syntheses of novel derivatives of NSAIDs have improved their safety profile which resulted in an increased anti-inflammatory activity with reduced ulcerogenicityCitation15,Citation16.
It would be desirable to provide an indene derivative having the anti-inflammatory and analgesic properties of a COX-2 inhibitor NSAID, but which also provides gastric sparing activity. The aim of this study was to prepare novel sulindac acetohydrazide derivatives and evaluate their potential antioxidant, analgesic, anti-inflammatory, ulcerogenic and COX-2 inhibition activity.
Experimental
Chemistry
Materials and methods
Solvents were procured from Merck. Thin layer chromatography (TLC), was performed on Silica gel 60 F254 coated plates (Merck) to check the purity of compounds. For performing FT-IR, Perkin Elmer FT-IR spectrophotometer was used. Melting points were determined by Gallenkamp melting point apparatus. 1H and 13C NMR were recorded in Bruker NMR 500/700 MHz and 125/176 MHz spectrophotometer. The samples were run in DMSO-d6 with tetra methyl silane (TMS) as an internal standard. Molecular masses of compounds were determined in GC mass spectroscopy. The CHN Elementar (Analysensysteme GmbH, Germany) was used for elemental analysis of the compounds. Cisplatin was purchased from Sigma-Aldrich, USA. Antibodies against COX-2 and β-actin were purchased from Abcam (Cat Log No: ab15191).
Synthesis of methyl-5-fluoro-1-{[4-(methane sulfinyl) phenyl] methylidene}-2-methyl-1H-inden-3-yl] acetate
The sulindac ester was prepared according to the reported procedureCitation17.
2-[5-Fluoro-1-{[4-(methanesulfinyl)phenyl]methylidene}-2-methyl-1H-inden-3-yl]acetohydrazide
The methyl ester of sulindac (0.01 mol) and hydrazine hydrate (99%) (0.2 mol) were refluxed in methanol (50 ml) for 30 h. The mixture was concentrated, cooled and poured in crushed ice in small portions while stirring, and kept for 3‒4 h at room temperature. The solid separated out was filtered, dried and crystallised from ethanol. The product was carefully checked by thin layer chromatography.
Colour: yellow; Yield: 70%; m.p.: 120‒122 °C; UV λmax (Methanol) = 327 nm; 1H NMR (500 MHz, DMSO‒d6): δ = 2.20 (3H, s, CH3), 2.82 (3H, s, SOCH3), 3.38 (2H, s, CH2), 4.28 (2H, bs, NH2, D2O exchg.), 6.71 (1H, t, J = 9.5 Hz, =CH), 7.15–7.80 (7H, m, Ar-H), 9.30 (1H, bs, CONH, D2O exchg.); 13C NMR (125.76 MHz, DMSO‒d6): δ = 10.88, 31.39, 43.59, 106.74, 106.93, 110.69, 110.87, 123.49, 123.56, 124.39, 129.71, 129.93, 130.40, 133.86, 138.29, 139.07, 140.95, 140.95, 146.69, 147.62, 147.69, 162.63, 163.96, 168.69; MS: m/z = 370.44 [M]+; Analysis: for C20H19FN2O2S, calcd. C 64.85, H 5.17, N 7.56, S 8.66%; found C 64.65, H 5.15, N 7.54 S 8.88%.
General procedure for the synthesis of N’-(substituted benzylidene)-2–(1-(4-(methylsulfinyl) benzylidene)-5-fluoro-2-methyl-1H-inden-3-yl) acetohydrazide (1–25)
A solution of sulindac acetohydrazide (1.0 mmol) in ethanol (50 ml) containing appropriate substituted benzaldehydes (1.1 mmol) and a catalytic amount of glacial acetic acid was heated under reflux for 3 h. The reaction mixture was added to the ice cold water in a beaker. The product was precipitated, filtered by vacuum filtration and washed several times with cold water. The solid was recrystallized from ethanol.
2-1-(4-(Methylsulfinyl)benzylidene)-5-fluoro-2-methyl-1H-inden-3-yl)-N′-benzylideneacetohydrazide (1)
Yield: 65%; m. p.: 138‒140 °C; IR (KBr) cm−1: 3150 (NH str.), 2980 (CH str.), 1662 (C=O, Str.), 1591 (C=N str.); 1H NMR (500 MHz, DMSO‒d6): δ = 2.23 (3H, s, CH3), 2.82 (3H, s, S=O CH3), 3.59 (1H, s, CH2), 4.00 (1H, s, CH2), 6.71 (1H, s, =CH), 7.11‒7.78 (12H, m, Ar-H), 8.28 (1H, s, N=CH), 11.50 (1H, s, CONH, D2O exchg.); 13C NMR (125.76 MHz, DMSO‒d6): δ = 10.9, 29.9, 43.5, 124.3, 127.3, 127.5, 129.0, 129.2, 129.7, 129.9, 130.0, 130.3, 130.4, 134.6, 138.4, 139.0, 140.9, 143.8, 146.6, 171.5; MS: m/z = 459.39 [M + 1]+; Analysis: for C27H23FN2O2S, calcd. C 70.72, H 5.06, N 6.11, S 6.99%; found C 70.99, H 5.05, N 6.14, S 6.97%.
N’-(4-Chlorobenzylidene)-2-(1-(4-(methylsulfinyl)benzylidene)-5-fluoro-2-methyl-1H-inden-3-yl)acetohydrazide (2)
Yield: 85%; m. p.: 228‒230 °C; IR (KBr) cm−1: 3150 (NH str.), 2955 (CH str.), 1664 (C=O, Str.), 1599 (C=N str.); 1H NMR (500 MHz, DMSO‒d6): δ = 2.22 (3H, s, CH3), 2.82 (3H, s, S=OCH3), 4.00 (2H, s, CH2), 6.72 (1H, s, =CH), 7.09‒7.78 (11H, m, Ar-H), 8.00 (1H, s, N=CH), 11.56 (1H, s, CONH, D2O exchg.); 13C NMR (125.76 MHz, DMSO‒d6): δ = 10.9, 29.9, 43.5, 124.3, 128.9, 129.3, 129.7, 130.4, 134.7, 139.0, 146.7, 171.5; MS: m/z = 493.40 [M + 1]+; Analysis: for C27H22ClFN2O2S, calcd. C 65.78, H 4.50, N 5.68, S 6.50%; found C 65.55, H 4.49, N 6.48, S 6.52%.
N′-(4-Dimethylaminobenzylidene)-2-1-(4-(methylsulfinyl)benzylidene)-5-fluoro-2-methyl-1H-inden-3-yl)acetohydrazide (3)
Yield: 50%; m. p.: 158‒160 °C; IR (KBr) cm−1: 3165 (NH str.), 3025 (CH str.), 1655 (C=O, Str.), 1599 (C=N str.); 1H NMR (500 MHz, DMSO‒d6): δ = 2.22 (3H, s, CH3), 2.82 (3H, s, S=O CH3), 2.96 (6H, s, 2 × NCH3), 3.54 (1H, s, CH2), 3.96 (1H, s, CH2), 6.73 (1H, s, =CH), 7.12‒7.78 (11H, m, Ar-H), 7.92 (1H, s, N=CH), 11.19 (1H, s, CONH, D2O exchg.); 13C NMR (125.76 MHz, DMSO‒d6): δ = 11.0, 29.9, 43.5, 112.2, 124.3, 128.5, 128.8, 129.6, 129.9, 130.4, 144.7, 146.6, 170.8; MS: m/z = 501.77 [M]+; Analysis: for C29H28FN3O2S, calcd. C 69.44, H 5.63, N 8.38, S 6.39%; found C 69.17, H 5.62, N 8.35, S 6.41%.
N′-(3-Hydroxybenzylidene)-2-1-(4-(methylsulfinyl)benzylidene)-5-fluoro-2-methyl-1H-inden-3-yl)acetohydrazide (4)
Yield: 60%; m. p.: 240‒242 °C; IR (KBr) cm−1: 3150 (NH str.), 3080 (CH str.), 1664 (C=O, Str.), 1601 (C=N str.); 1H NMR (500 MHz, DMSO‒d6): δ = 2.22 (3H, s, CH3), 2.81 (3H, s, CH3S=O), 3.99 (1H, s, CH2), 6.71 (1H, s, =CH), 7.10‒7.78 (11H, m, Ar-H), 7.97 (1H, s, N=CH), 9.65 (1H, s, OH, D2O exchg.), 11.44 (1H, s, CONH, D2O exchg.); 13C NMR (125.76 MHz, DMSO‒d6): δ = 10.9, 29.7, 43.5, 110.7, 113.2, 118.7, 124.3, 129.9, 130.4, 135.8, 140.9, 144.0, 158.1, 171.4; MS: m/z = 474.94 [M]+; Analysis: for C27H23FN2O3S, calcd. C 68.34, H 4.89, N 5.90, S 6.76%; found C 68.07, H 4.90, N 5.88, S 6.78%.
N′-(4-Hydroxybenzylidene)-2-(1-(4-(methylsulfinyl)benzylidene)-5-fluoro-2-methyl-1H-inden-3-yl)acetohydrazide (5)
Yield: 50%; m. p.: 210‒212 °C; IR (KBr) cm−1: 3165 (NH str.), 3031 (CH str.), 1652 (C=O, Str.), 1597 (C=N str.); 1H NMR (500 MHz, DMSO‒d6): δ = 2.22 (3H, s, CH3), 2.83 (3H, s, S=OCH3), 3.18 (1H, s, CH2), 3.97 (1H, s, CH2), 6.72 (1H, s, =CH), 6.82‒7.78 (11H, m, Ar-H), 7.95 (1H, s, N=CH), 9.91 (1H, s, −OH), 11.28 (1H, s, CONH, D2O exchg.); 13C NMR (125.76 MHz, DMSO‒d6): δ = 11.0, 29.9, 43.5, 49.0, 106.8, 110.8, 116.1, 124.4, 129.0, 130.4, 144.1, 146.6, 147.4, 147.8, 147.9, 159.6, 159.8, 162.2, 163.6, 165.4, 171.1; MS: m/z = 474.75 [M]+; Analysis: for C27H23FN2O3S, calcd. C 68.34, H 4.89, N 5.90, S 6.76%; found C 68.12, H 4.90, N 5.91, S 6.75%
N′-(2-Methoxybenzylidene)-2-(1-(4-(methylsulfinyl) benzylidene)-5-fluoro-2-methyl-1H-inden-3-yl) acetohydrazide (6)
Yield: 55%; m. p.: 173‒176 °C; IR (KBr) cm−1: 3150 (NH str.), 3007 (CH str.), 1653 (C=O, Str.), 1564 (C=N str.); 1H NMR (500 MHz, DMSO‒d6): δ = 2.18 (3H, s, CH3), 2.80 (3H, s, S=OCH3), 3.81 (3H, s, OCH3), 3.96 (2H, s, CH2), 6.69 (1H, s, =CH), 7.0‒7.77 (11H, m, Ar-H), 8.36 (1H, s, N=CH), 11.45 (1H, s, CONH, D2O exchg.); 13C NMR (125.76 MHz, DMSO‒d6): δ = 10.6, 14.7, 31.0, 49.0, 56.2, 112.4, 121.2, 127.0, 133.5, 157.0, 159.2, 171.0; MS: m/z = 489.45 [M + 1]+; Analysis: for C28H25FN2O3S, calcd. C 68.83, H 5.16, N 5.73, S 6.56%; found C 68.56, H 5.15, N 5.75, S 5.13%.
N′-(3-Methoxybenzylidene)-2-1-(4-(methylsulfinyl) benzylidene)-5-fluoro-2-methyl-1H-inden-3-yl)acetohydrazide (7)
Yield: 65%; m. p.: 130‒132 °C; IR (KBr) cm−1: 3150 (NH str.), 2960 (CH str.), 1664 (C=O, Str.), 1588 (C=N str.); 1H NMR (500 MHz, DMSO‒d6): δ = 2.22 (3H, s, CH3), 2.82 (3H, s, CH3S=O), 3.79 (3H, s, OCH3), 4.01 (2H, s, CH2), 6.70 (1H, s, =CH), 6.99‒7.78 (11H, m, Ar-H), 8.03 (1H, s, N=CH), 11.52 (1H, s, CONH, D2O exchg.); 13C NMR (125.76 MHz, DMSO‒d6): δ = 10.9, 11.0, 29.9, 43.5, 55.5, 93.0, 110.8, 116.3, 120.0, 123.5, 124.3, 129.9, 130.4, 133.7, 136.0, 138.4, 138.7, 139.0, 140.9, 143.7, 146.6, 147.1, 160.0, 171.5; MS: m/z = 488.85 [M]+; Analysis: for C28H25FN2O3S, calcd. C 68.83, H 5.16, N 5.73, S 6.56%; found C 69.10, H 5.17, N 5.75, S 6.54%.
N′-(2-Nitrobenzylidene)-2-(1-(4-(methylsulfinyl)benzylidene)-5-fluoro-2-methyl-1H-inden-3-yl)acetohydrazide (8)
Yield: 70%; m. p.: 148‒150 °C; IR (KBr) cm−1: 3150 (NH str.), 3001 (CH str.), 1665 (C=O, Str.), 1570 (C=N str.); 1H NMR (500 MHz, DMSO‒d6): δ = 2.23 (3H, s, CH3), 2.82 (3H, s, S=OCH3), 3.62 (1H, s, CH2), 4.00 (1H, s, CH2), 6.71 (1H, s, =CH), 7.06‒8.08 (11H, m, Ar-H), 8.42 (1H, s, N=CH), 11.79 (1H, s, CONH, D2O exchg.); 13C NMR (125.76 MHz, DMSO‒d6): δ = 10.9, 29.9, 43.5, 124.4, 125.0, 128.7, 129.7, 129.8, 130.4, 130.9, 133.9, 138.5, 139.0, 139.2, 140.8, 142.6, 147.7, 148.4, 171.8; MS: m/z = 503.22 [M]+; Analysis: for C27H22FN3O4S, calcd. C 64.40, H 4.40, N 8.34, S 6.37%; found C 64.60, H 4.41, N 8.36, S 6.39%.
N′-(3-Nitrobenzylidene)-2-1-(4-(methylsulfinyl)benzylidene)-5-fluoro-2-methyl-1H-inden-3-yl)acetohydrazide (9)
Yield: 70%; m. p.: 165‒167 °C; IR (KBr) cm−1: 3150 (NH str.), 3002 (CH str.), 1654 (C=O, Str.), 1570 (C=N str.); 1H NMR (500 MHz, DMSO‒d6): δ = 2.21 (3H, s, CH3), 2.82 (3H, s, S=O CH3), 3.63 (1H, s, CH2), 4.03 (1H, s, CH2), 6.70 (1H, s, =CH), 7.08‒8.24 (11H, m, Ar-H), 8.52 (1H, s, N=CH), 11.73 (1H, s, CONH, D2O exchg.); 13C NMR (125.76 MHz, DMSO‒d6): δ = 10.9, 30.0, 43.5, 121.4, 124.3, 124.5, 129.7, 129.8, 130.4, 130.8, 133.4, 136.4, 138.4, 139.0, 140.8, 141.6, 146.6, 148.6, 171.8; MS: m/z = 504.41 [M + 1]+; Analysis: for C27H23FN2O2S, calcd. C 70.72, H 5.06, N 6.11, S 6.99%; found C 71.00, H 5.07, N 6.14, S 6.97%.
N′-(4-Nitrobenzylidene)-2-(1-(4-(methylsulfinyl)benzylidene)-5-fluoro-2-methyl-1H-inden-3-yl)acetohydrazide (10)
Yield: 80%; m. p.: 220‒222 °C; IR (KBr) cm−1: 3150 (NH str.), 2962 (CH str.), 1666 (C=O, Str.), 1591 (C=N str.); 1H NMR (500 MHz, DMSO‒d6): δ = 2.23 (3H, s, CH3), 2.82 (3H, s, S=OCH3), 3.64 (1H, s, CH2), 4.00 (1H, s, CH2), 6.71 (1H, s, =CH), 7.08‒7.97 (11H, m, Ar-H), 8.38 (1H, s, N=CH), 11.80 (1H, s, CONH, D2O exchg.); 13C NMR (125.76 MHz, DMSO‒d6): δ = 10.9, 29.8, 32.0, 43.5, 124.3, 124.4, 128.2, 128.4, 129.8, 130.4, 139.0, 140.8, 141.4, 146.6, 148.1, 166.3, 171.9; MS: m/z = 504.28 [M + 1]+; Analysis: for C27H22FN3O4S, calcd. C 64.40, H 4.40, N 8.34, S 6.37%; found C 64.62, H 4.39, N 8.36, S 6.38%.
N′-(2,3-Dihydroxybenzylidene)-2-(1-(4-(methylsulfinyl)benzylidene)-5-fluoro-2-methyl-1H-inden-3-yl)acetohydrazide (11)
Yield: 52%; m. p.: 220‒222 °C; IR (KBr) cm−1: 3150 (NH str.), 3060 (CH str.), 1671 (C=O, Str.), 1596 (C=N str.); 1H NMR (500 MHz, DMSO‒d6): δ = 2.24 (3H, s, CH3), 2.83 (3H, s, S=OCH3), 3.62 (1H, s, CH2), 3.97 (1H, s, CH2), 6.74 (1H, s, =CH), 6.84‒7.91 (10H, m, Ar-H), 8.42 (1H, s, N=CH), 9.11 (1H, s, OH, D2O exchg.), 9.21 (1H, s, OH, D2O exchg.), 11.32 (1H, s, CONH, D2O exchg.); 13C NMR (125.76 MHz, DMSO‒d6): δ = 10.9, 31.7, 43.5, 110.7, 111.0, 116.9, 117.1, 117.8, 119.1, 119.6, 120.3, 121.2, 124.4, 130.4, 133.1, 133.8, 138.4, 138.9, 139.0, 140.8, 146.0, 146.6, 146.7, 148.3, 165.6, 171.0; MS: m/z = 490.70 [M]+; Analysis: for C27H23FN2O4S, calcd. C 66.11, H 4.73, N 5.71, S 6.54%; found C 66.33, H 5.72, N 5.68, S 6.53%.
N′-(2,5-Dihydroxybenzylidene)-2-(1-(4-(methylsulfinyl)benzylidene)-5-fluoro-2-methyl-1H-inden-3-yl)acetohydrazide (12)
Yield: 55%; m. p.: 180‒182 °C; IR (KBr) cm−1: 3150 (NH str.), 2915 (CH str.), 1656 (C=O, Str.), 1570 (C=N str.); 1H NMR (500 MHz, DMSO‒d6): δ = 2.22 (3H, s, CH3), 2.81 (3H, s, S=OCH3), 4.02 (2H, s, CH2), 6.72 (1H, s, =CH), 7.18‒7.96 (10H, m, Ar-H), 8.38 (1H, s, N=CH), 8.98 (1H, s, OH, D2O exchg.), 10.22 (1H, s, OH, D2O exchg.), 11.78 (1H, s, CONH, D2O exchg.); 13C NMR (125.76 MHz, DMSO‒d6): δ = 11.0, 29.6, 31.8, 36.2, 106.7, 110.8, 114.0, 117.4, 119.4, 124.4, 129.9, 130.4, 139.0, 140.9, 146.6, 150.3, 162.8, 165.6, 171.0; MS: m/z = 490.55 [M]+; Analysis: for C27H23FN2O4S, calcd. C 66.11, H 4.73, N 5.71, S 6.54%; found C 66.30, H 4.74, N 5.69, S 6.55%.
N′-(2,3-Dimethoxybenzylidene)-2-(1-(4-(methylsulfinyl)benzylidene)-5-fluoro-2-methyl-1H-inden-3-yl)acetohydrazide (13)
Yield: 62%; m. p.: 203‒205 °C; IR (KBr) cm−1: 3150 (NH str.), 3014 (CH str.), 1654 (C=O, Str.), 1565 (C=N str.); 1H NMR (500 MHz, DMSO‒d6): δ = 2.21 (3H, s, CH3), 2.83 (3H, s, S=OCH3), 3.84 (1H, s, CH2), 3.78 (6H, s, 2 × OCH3), 4.00 (1H, s, CH2), 6.71 (1H, s, =CH), 7.11‒7.78 (10H, m, Ar-H), 8.35 (1H, s, N=CH), 11.47 (1H, s, CONH, D2O exchg.); 13C NMR (125.76 MHz, DMSO‒d6): δ = 10.9, 29.9, 32.0, 43.5, 56.2, 61.6, 106.7, 106.9, 110.7, 114.4, 117.3, 124.3, 130.4, 138.4, 139.0, 139.5, 140.9, 142.5, 146.6, 148.3, 153.1, 162.2, 163.6, 165.7, 171.4; MS: m/z = 518.84 [M]+; Analysis: for C29H27FN2O4S, calcd. C 67.16, H 5.25, N 5.40, S 6.18%; found C 67.3.1, H 5.24, N 5.38, S 6.19%.
N′-(2,4-Dimethoxybenzylidene)-2-(1-(4-(methylsulfinyl)benzylidene)-5-fluoro-2-methyl-1H-inden-3-yl)acetohydrazide (14)
Yield: 60%; m. p.: 185‒187 °C; IR (KBr) cm−1: 3150 (NH str.), 3011 (CH str.), 1654 (C=O, Str.), 1600 (C=N str.); 1H NMR (500 MHz, DMSO‒d6): δ = 2.21 (3H, s, CH3), 2.84 (3H, s, S=OCH3), 3.83 (6H, s, 2 × CH3), 3.84 (2H, s, CH2), 6.63 (1H, s, =CH), 7.13‒7.74 (10H, m, Ar-H), 8.32 (1H, s, N=CH), 11.32 (1H, s, CONH, D2O exchg.); 13C NMR (125.76 MHz, DMSO‒d6): δ = 10.9, 29.9, 32.0, 43.5, 55.8, 56.1, 98.5, 106.7, 110.7, 115.3, 123.4, 124.3, 127.0, 129.5, 130.3, 133.4, 138.2, 139.0, 140.8, 142.6, 147.5, 159.4, 162.2, 163.6, 165.4, 171.1; MS: m/z = 518.91 [M]+; Analysis: for C29H27FN2O4S, calcd. C 67.16, H 5.25, N 5.40, S 6.18%; found C 67.33, H 5.26, N 5.42, S 6.17%.
N′-(3,4-Dimethoxybenzylidene)-2-(1-(4-(methylsulfinyl)benzylidene)-5-fluoro-2-methyl-1H-inden-3-yl)acetohydrazide (15)
Yield: 65%; m. p.: 230‒232 °C; IR (KBr) cm−1: 3150 (NH str.), 3002 (CH str.), 1656 (C=O, Str.), 1571 (C=N str.); 1H NMR (500 MHz, DMSO‒d6): δ = 2.25 (3H, s, CH3), 2.83 (3H, s, S=OCH3), 3.58 (1H, s, CH2), 3.81 (6H, s, 2 × OCH3), 4.00 (1H, s, CH2), 6.72 (1H, s, =CH), 7.01‒7.79 (10H, m, Ar-H), 7.80 (1H, s, N=CH), 11.38 (1H, s, CONH, D2O exchg.); 13C NMR (125.76 MHz, DMSO‒d6): δ = 10.9, 30.0, 32.0, 43.5, 55.8, 56.0, 108.7, 111.9, 121.8, 122.2, 124.4, 127.3, 129.8, 130.4, 138.3, 139.4, 138.3, 139.0, 140.8, 144.0, 146.6, 149.4, 150.9, 171.2; MS: m/z = 518.58 [M]+; Analysis: for C29H27FN2O4S, calcd. C 67.16, H 5.25, N 5.40, S 6.18%; found C 67.32, H 5.26, N 5.38, S 6.17%.
N′-(2-Hydroxy-3-methoxymethoxybenzylidene)-2-(1-(4-(methylsulfinyl)benzylidene)-5-fluoro-2-methyl-1H-inden-3-yl)acetohydrazide (16)
Yield: 55%; m. p.: 210‒212 °C; IR (KBr) cm−1: 3180 (NH str.), 3051 (CH str.), 1693 (C=O, Str.), 1599 (C=N str.); 1H NMR (500 MHz, DMSO‒d6): δ = 2.24 (3H, s, CH3), 2.83 (3H, s, S=OCH3), 3.61 (1H, s, CH2), 3.80 (3H, s, OCH3), 4.00 (1H, s, CH2), 6.82 (1H, s, =CH), 7.01‒7.79 (10 H, m, Ar-H), 8.48 (1H, s, N=CH), 10.78 (1H, s, OH, D2O exchg.), 11.85 (1H, s, CONH, D2O exchg.); 13C NMR (125.76 MHz, DMSO‒d6): δ = 10.9, 29.9, 31.7, 43.5, 56.2, 106.7, 113.2, 114.1, 118.0, 119.3, 119.4, 119.6, 121.3, 130.4, 138.3, 138.8, 138.9, 139.0, 140.8, 141.0, 147.4, 162.2, 162.3, 163.7, 165.6, 171.2; MS: m/z = 504.34 [M]+; Analysis: for C28H25FN2O4S, calcd. C 66.65, H 4.99, N 5.55, S 6.35%; found C 66.85, H 4.50, N 5.53, S 6.34%.
N′-(3-Hydroxy-4-methoxybenzylidene)-2-(1-(4-(methylsulfinyl)benzylidene)-5-fluoro-2-methyl-1H-inden-3-yl)acetohydrazide (17)
Yield: 58%; m. p.: 208‒210 °C; IR (KBr) cm−1: 3150 (NH str.), 3023 (CH str.), 1657 (C=O, Str.), 1569 (C=N str.); 1H NMR (500 MHz, DMSO‒d6): δ = 2.22 (3H, s, CH3), 2.83 (3H, s, S=OCH3), 3.56 (1H, s, CH2), 3.82 (3H, s, OCH3), 3.99 (1H, s, CH2), 6.72 (1H, s, =CH), 6.98‒7.80 (10H, m, Ar-H), 7.92 (1H, s, N=CH), 9.24 (1H, s, OH, D2O exchg.), 11.32 (1H, s, CONH, D2O exchg.); 13C NMR (125.76 MHz, DMSO‒d6): δ = 10.9, 29.7, 32.0, 43.5, 56.0, 106.7, 112.6, 120.3, 120.7, 127.4, 130.4, 138.4, 138.6, 139.0, 140.8, 144.1, 147.2, 150.2, 162.2, 163.6, 165.5, 171.1; MS: m/z = 504.94 [M]+; Analysis: for C28H25FN2O4S, calcd. C 66.65, H 4.99, N 5.55, S 6.35%; found C 66.45, H 4.98, N 5.56, S 6.36%.
N′-(3-Ethoxy-4-hydroxybenzylidene)-2-(1-(4-(methylsulfinyl) benzylidene)-5-fluoro-2-methyl-1H-inden-3-yl)acetohydrazide (18)
Yield: 60%; m. p.: 193‒195 °C; IR (KBr) cm−1: 3255 (NH str.), 2940 (CH str.), 1661 (C=O, Str.), 1592 (C=N str.); 1H NMR (500 MHz, DMSO‒d6): δ = 1.37 (3H, s, CH3), 2.21 (3H, s, CH3), 2.83 (3H, s, S=OCH3), 3.43 (2H, q, OCH2), 4.04 (2H, s, CH2), 6.83 (1H, s, =CH), 7.17‒7.81 (10H, m, Ar-H), 8.16 (1H, s, N=CH), 9.49 (1H, s, OH, D2O exchg.), 11.31 (1H, s, CONH, D2O exchg.); 13C NMR (125.76 MHz, DMSO‒d6): δ = 11.0, 15.2, 30.1, 43.6, 54.3, 110.9, 116.0, 121.9, 123.6, 124.4, 126.0, 129.8, 130.0, 133.8, 138.3, 138.7, 139.1, 140.9, 144.4, 146.5, 147.6, 149.4, 162.3, 163.7, 165.6, 171.2; MS: m/z = 520.49 [M + 2]+; Analysis: for C29H27FN2O4S, C 67.16, H 5.25, N 5.40, S 6.18%; found C 67.35, H 5.24, N 5.42, S 6.19%.
N′-(3-Methoxy-4-ethoxybenzylidene)-2-(1-(4-(methylsulfinyl)benzylidene)-5-fluoro-2-methyl-1H-inden-3-yl)acetohydrazide (19)
Yield: 65%; m. p.: 158‒160 °C; IR (KBr) cm−1: 3227 (NH str.), 3100 (CH str.), 1658 (C=O, Str.), 1603 (C=N str.); 1H NMR (500 MHz, DMSO‒d6): δ = 1.32 (3H, s, CH3), 2.22 (3H, s, CH3), 2.80 (3H, s, S=OCH3), 3.76 (3H, s, OCH3), 3.98 (2H, q, OCH2), 4.04 (1H, s, CH2), 6.71 (1H, s, =CH), 6.96‒7.95 (10H, m, Ar-H), 8.17 (1H, s, N=CH), 11.36 (1H, s, CONH, D2O exchg.); 13C NMR (125.76 MHz, DMSO‒d6): δ = 10.9, 11.0, 15.1, 30.0, 43.5, 55.7, 64.1, 106.8, 108.7, 110.7, 120.6, 121.7, 124.4, 127.1, 129.9, 130.4, 133.7, 138.3, 138.7, 139.0, 140.9, 144.0, 146.6, 147.4, 147.8, 149.5, 150.3, 162.2, 163.6, 165.6, 171.2; MS: m/z = 535.19 [M + 2]+; Analysis: for C30H29FN2O4S, calcd. C 67.65, H 5.49, N 5.26, S 6.02%; found C 67.42, H 5.50, N 5.24, S 6.01%.
N′-(3,5-Dimethoxy-4-hydroxybenzylidene)-2-(1-(4-(methylsulfinyl)benzylidene)-5-fluoro-2-methyl-1H-inden-3-yl)acetohydrazide (20)
Yield: 65%; m. p.: 218‒220 °C; IR (KBr) cm−1: 3150 (NH str.), 3010 (CH str.), 1654 (C=O, Str.), 1577 (C=N str.); 1H NMR (500 MHz, DMSO‒d6): δ = 2.23 (3H, s, CH3), 2.82 (3H, s, S=OCH3), 3.84 (6H, s, 2 × OCH3), 3.98 (2H, s, CH2), 6.74 (1H, s, =CH), 7.17‒7.80 (9H, m, Ar-H), 8.33 (1H, s, N=CH), 11.31 (1H, s, CONH, D2O exchg.); 13C NMR (125.76 MHz, DMSO‒d6): δ = 10.9, 30.1, 43.5, 56.2, 56.9, 98.2, 106.8, 107.9, 108.3, 110.7, 113.6, 124.3, 130.4, 138.3, 139.0, 140.8, 142.7, 143.6, 146.6, 152.2, 153.6, 165.3, 171.1; MS: m/z = 534.59 [M]+; Analysis: for C29H27FN2O5S, calcd. C 65.15, H 5.09, N 5.24, S 6.00%; found C 65.30, H 5.10, N 5.22, S 6.01%.
N′-(2,3,4-Trihydroxybenzylidene)-2-(1-(4-(methylsulfinyl)benzylidene)-5-fluoro-2-methyl-1H-inden-3-yl)acetohydrazide (21)
Yield: 50%; m. p.: 195‒197 °C; IR (KBr) cm−1: 3180 (NH str.), 3051 (CH str.), 1668 (C=O, Str.), 1598 (C=N str.); 1H NMR (500 MHz, DMSO‒d6): δ = 2.24 (3H, s, CH3), 2.83 (3H, s, S=OCH3), 3.59 (1H, s, CH2), 6.38 (1H, s, =CH), 6.71‒7.81 (10 H, m, Ar-H), 8.30 (1H, s, N=CH), 9.24 (1H, s, OH, D2O exchg.), 11.29 (1H, s, OH, D2O exchg.), 11.73 (1H, s, CONH, D2O exchg.); 13C NMR (125.76 MHz, DMSO‒d6): δ = 10.9, 29.7, 31.7, 43.5, 108.0, 111.1, 121.5, 124.4, 130.4, 133.1, 138.8, 139.0, 140.8, 146.7, 147.8, 149.2, 149.5, 162.3, 163.7, 165.2, 170.5; MS: m/z = 504.94 [M-1]+; Analysis: for C27H23FN2O5S, calcd. C 64.02, H 4.58, N 5.53, S 6.33%; found C 64.19, H 4.57, N 5.55, S6.31%.
N′-(2,3,4-Timethoxybenzylidene)-2-(1-(4-(methylsulfinyl)benzylidene)-5-fluoro-2-methyl-1H-inden-3-yl)acetohydrazide (22)
Yield: 70%; m. p.: 185‒187 °C; IR (KBr) cm−1: 3150 (NH str.), 2987 (CH str.), 1651 (C=O, Str.), 1589 (C=N str.); 1H NMR (500 MHz, DMSO‒d6): δ = 2.21 (3H, s, CH3), 2.82 (3H, s, S=OCH3), 3.82 (9H, s, 3 × OCH3), 3.97 (2H, s, CH2), 6.73 (1H, s, =CH), 7.18‒7.79 (9H, m, Ar-H), 8.24 (1H, s, N=CH), 11.35 (1H, s, CONH, D2O exchg.);13C NMR (125.76 MHz, DMSO‒d6): δ = 11.0, 30.0, 32.1, 43.6, 56.5, 61.0, 62.3, 106.9, 109.2, 110.9, 121.0, 124.5, 130.0, 130.5, 138.4, 139.1, 139.8, 141.0, 142.1, 142.6, 146.7, 153.0, 155.5, 162.3, 163.7, 165.6, 171.3; MS: m/z = 548.03 [M]+; Analysis: for C30H29FN2O5S, calcd. C 65.68, H 5.33, N 5.11, S 5.84%; found C 65.45, H 5.34, N 5.13, S 5.85%.
N′-(2,4,5-Trimethoxybenzylidene)-2-1-(4-(methylsulfinyl)benzylidene)-5-fluoro-2-methyl-1H-inden-3-yl)acetohydrazide (23)
Yield: 60%; m. p.: 233‒235 °C; IR (KBr) cm−1: 3150 (NH str.), 2914 (CH str.), 1658 (C=O, Str.), 1598 (C=N str.); 1H NMR (500 MHz, DMSO‒d6): δ = 2.16 (3H, s, CH3), 2.82 (3H, s, S=OCH3), 3.63 (9H, s, 3 × OCH3), 3.70 (2H, s, CH2), 6.73 (1H, s, =CH), 7.01‒7.79 (9H, m, Ar-H), 8.80 (1H, s, N=CH), 11.11 (1H, s, CONH, D2O exchg.); 13C NMR (125.76 MHz, DMSO‒d6): δ = 10.70, 31.0, 43.5, 52.3, 106.4, 110.9, 124.4, 130.4, 138.8, 140.6, 147.2, 160.3, 162.3, 162.6, 163.6, 171.0; MS: m/z = 544.67 [M-4]+; Analysis: for C30H29FN2O5S, calcd. C 65.68, H 5.33, N 5.11, S 5.84%; found C 65.45, H 5.32, N 5.09, S 5.85%.
N′-(2,4,6-Timethoxybenzylidene)-2-(1-(4-(methylsulfinyl)benzylidene)-5-fluoro-2-methyl-1H-inden-3-yl)acetohydrazide (24)
Yield: 68%; m. p.: 193‒195 °C; IR (KBr) cm−1: 3150 (NH str.), 3001 (CH str.), 1652 (C=O, Str.), 1584 (C=N str.); 1H NMR (500 MHz, DMSO‒d6): δ = 2.19 (3H, s, CH3), 2.79 (3H, s, S=OCH3), 3.78 (9H, s, 3 × OCH3), 3.85 (2H, s, CH2), 6.68 (1H, s, =CH), 7.18‒7.72 (9H, m, Ar-H), 8.22 (1H, s, N=CH), 11.11 (1H, s, CONH, D2O exchg.); 13C NMR (125.76 MHz, DMSO‒d6): δ = 10.86, 29.38, 32.0, 43.5, 55.8, 56.3, 91.5, 104.1, 106.8, 110.8, 123.5, 124.4, 129.6, 130.4, 138.6, 139.1, 141.0, 142.9, 146.5, 147.9, 160.3, 162.3, 162.7, 163.7, 171.1; MS: m/z = 547.97 [M-1]+; Analysis: for C30H29FN2O5S, calcd. C 65.68, H 5.33, N 5.11, S 5.84%; found C 65.88, H 5.34, N 5.13, S 5.85%.
N′-(3,4,5-Trimethoxybenzylidene)-2-(1-(4-(methylsulfinyl)benzylidene)-5-fluoro-2-methyl-1H-inden-3-yl)acetohydrazide (25)
Yield: 62%; m. p.: 165‒167 °C; IR (KBr) cm−1: 3150 (NH str.), 2917 (CH str.), 1652 (C=O, Str.), 1598 (C=N str.); 1H NMR (500 MHz, DMSO‒d6): δ = 2.23 (3H, s, CH3), 2.82 (3H, s, S=OCH3), 3.81 (9H, s, 3 × OCH3), 4.01 (1H, s, CH2), 6.72 (1H, s, =CH), 7.05‒7.79 (9H, m, Ar-H), 7.98 (1H, s, N=CH), 11.50 (1H, s, CONH, D2O exchg.); 13C NMR (125.76 MHz, DMSO‒d6): δ = 11.2, 30.2, 43.6, 56.4, 60.7, 104.6, 107.0, 110.9, 123.6, 124.5, 130.0, 130.5, 133.8, 138.8, 139.1, 139.5, 140.9, 143.9, 146.7, 147.3, 147.7, 153.7, 162.4, 163.7, 171.6; MS: m/z = 547.64 [M-1]+; Analysis: for C30H29FN2O5S, calcd. C 65.68, H 5.33, N 5.11, S 5.84%; found C 65.43, H 5.32, N 5.13, S 5.82%.
DPPH radical scavenging assay
The antioxidant activity was measured based on the scavenging activity of the stable DPPH free radical. The antioxidant activity was determined by following the methodCitation18. The compounds in concentration of (100 µg/mL) were added to 3 ml of 0.004% DPPH solution. Methanol was replaced in the control sample. Absorbance was determined at 520 nm after 30 min. Butylated hydroxytoluene (BHT) was used a reference drug. The percent inhibition was calculated by the following equation: A0 − At/Ao × 100, where At = absorbance of compound, A0 = absorbance of control.
Pharmacological activities
Thirty-five Adult wistar male rats weighing 240–260 g, 12–14 weeks’ old and mice were obtained from animal house of Department of the Community Health Sciences, College of Applied Medical Sciences, King Saud University, Riyadh, KSA. Animals were given favourable conditions (temperature 25 °C, 12/12 h light and dark cycle, and humidity 60 ± 10% and pathogen-free environment). The rats were fed a dietary formulation of protein (18.1%), fat (7.1%), carbohydrate (59.3%) and fibre (15.5%) with food and water being provided ad libitum. The study protocol was approved by Ethical Committee of College of Applied Medical Sciences, King Saud University, Saudi Arabia. (Ethics Number: CAMS 22 – 39/40).
Anti-pyretic study
Hyperthermia was induced in mice by (s.c.) injection of (20 ml/kg) of a 20% aqueous suspension of brewer’s yeast in the back below of nape of the neckCitation19. The animals were fasted for the duration of 24 h. Water was made available. Control temperature was taken 24 h after the yeast injection to determine the pyretic response to yeast. Temperature taken 1 h prior to drug administration in the fevered animals, served as a pre drug control. Drugs were given 24 h after the yeast injection and temperature were recorded at 60, 90 and 120 min. after the administration.
Analgesic study by tail flick method
Acute nociception was assessed using a tail flick apparatus (Tail Flick model DS 20 Sorrel Apelex, France) following the methodCitation20. Briefly, each animal was placed in a restrainer, 2 min. before treatment, and baseline reaction time was measured by focussing an intensity controlled beam of light on the distal one-third portion of the animals’ tail. The suspension was orally administered immediately after this step and 25 min. later, the post drug reaction time was measured. A 10-s cut-off time was used in order to prevent tissue damage.
Analgesic activity by hot plate method
The hot plate method used as described by TurnerCitation21. The animals were dropped gently on a hot plate maintained at 55 ± 5.5 °C. The reaction time was taken as the interval extending from the instant the animal reached the hot plate until the moment the animal licked its forefeet or jumped off. The reaction time was measured 10 min before the oral administration of the drug and +60 + 90 + 120 min after treatments.
Analgesic activity by writhing test
Writhing was induced in mice by intraperitoneal administration of 0.1 ml of 1% acetic acid. The number of writhing movements was counted for 20 min. The writhing test was performed after the administration of the vehicle or drug.
Carrageenan-induced paw edoema in rats
Pedal inflammation in albino rats of either sex was produced according to the reported methodCitation22. An injection wad made of 0.05 ml of 1% carrageenan sodium salt (BDH) into right hind foot of each rat under the plantar aponeurosis. The test group of rats was treated orally with drugs 1 h before carrageenan injection. At the same time, control group was given 5 ml/kg of normal saline and the reference group was given 100 mg/kg of an aqueous solution of sulindac. The measurements of foot volume were done by the displacement technique using a plethysmometer (Apelex, France) immediately after and +2 and +3 h after the injection of carrageenan. The inhibitory activity was calculated to the following formula 100 (1 − a − x/b − y); where “b” is the mean paw volume of control rats after carrageenan injection and “y” before the injection; whereas” x” is the mean paw volume of treated rats before injection and “a” is the mean paw volume after carrageenan injection.
Ulcer study of drugs using 80% ethanol
The ethanol induced ulcer model was used to study gastro-protective activity of compound 3. The rats were grouped into five groups (n = 6). Groups I and II received saline solution and served as negative-control and ulcer-control, respectively. Group III received compound 3 (150 mg/kg) orally and served as the experimental drug group. Animals in groups IV received the Sulindac (100 mg/kg body weight). After 1 h, all of the groups, except Group I, received (20 ml/kg) of 80%. The animals were sacrificed 1 h later under anaesthesia and their stomachs were quickly removed for further studiesCitation23.
Gastric lesions induced by indomethacin
Suspension of Indomethacin in 1.0% carboxymethylcellulose (CMC) in water (6 mg/mL) at a dose of (30 mg/kg) body weight was administered orally. Control rats were treated with vehicle. Compound 3 was given half an hour prior to Indomethacin administration at a dose of 150 mg/kgCitation24.
Determination of malondialdehyde (MDA)
The MDA was measured according to the method by Utley and othersCitation25. The tissue was removed and each tissue was homogenised in 0.15 M KCl to give a 10% W/v homogenate. Aliquots of homogenate (1 ml) were incubated at 37 °C for 3 h in a metabolic shaker. Then 1 ml of 10% aqueos trichloroacetic acid was added and mixed. This was then centrifuged at 4000 rpm for 10 min. Total of 1 ml of the supernatant was removed and mixed with 1 ml of 0.67% thiobarbituric acid in water and placed in a boiling water bath for 10 min. The mixture was cooled and diluted with 1 ml of distilled water. The absorbance of the solution was then read at 535 nm. The content of MDA (nmol/g) was then calculated, by the reference to a standard curve of MDA solution.
Estimation of non-protein sulfhydryls (NP-SH)
Hepatic non-protein sulfhydryls (NP-SH) was measured according to the reported method by Sedlak and LindsayCitation26. The tissue was homogenised in ice cold 0.02 mmol/L ethylenediaminetetraacetic acid (EDTA). The Aliquotes of 5 ml of the homogenates were mixed in 15 ml test tube with 4 ml of distilled water and 1 ml of 50% trichloacetic acid (TCA). The tube was shaken intermittently for 10 min. and centrifuged 3000 rpm for 10 min. Total of 2 ml supernatant was mixed with 4 ml of 0.4 mmol/L tris buffer (pH 8.9). Total of 0.1 ml of 5,5-dithiobis (2-nitrobenzoic acid) (BTNB) was added and the sample was shaken. The absorbance was measured within 5 min of addition of DTNB at 412 nm against reagent blank.
Determination of LD50
The LD50 (lethal dose 50%) was calculated for compound 3 by Karber methodCitation27. For determination of LD50, an observation was made for 24 h and symptoms of toxicity and rate of mortality were noted. Expired animals were counted at the end of the study period for the calculation of LD50. LD50 = LD100 − ∑ × (a × b)/n, where n is the total number of animals in a group, a is the difference between two successive doses of administered extract/substance, b is the average number of dead animals in two successive doses, and LD100 is the lethal dose causing 100% death of all test animals.
COX-2 mRNA expression in cisplatin-induced hepatotoxicity in rats
The animals were divided into five groups and each group with seven rats.
Group 1: Control (Normal) group, received a single dose (i.p) of isotonic saline on the second day of experiment.
Group 2: DMSO group, received a single dose (i.p) of 2% DMSO on the second day of experiment.
Group 3: Cisplatin group, received a single dose of cisplatin (12 mg/kg, i.p) on the second day of experiment.
Group 4: Cisplatin – compound 3 group, received compound 3 (20 mg/kg i.p) for 7 days and a single dose of Cisplatin (12 mg/kg) on the second day of experiment, 1 h after the dose of compound 3.
Group 5: Cisplatin – compound 3 group, received compound 3 (40 mg/kg i.p) for 7 days and a single dose of Cisplatin (12 mg/kg) on the second day of experiment, 1 h after the dose of compound 8.
The doses of compound 3 and cisplatin were selected after performing the pilot experiment.
Sample collection and preparation
On the last day of experiment, all animals were terminated and anaesthesia was made by injecting ketamine/xylazine mixture (75/2.5 mg/kg, respectively) via the intraperitoneal route. Anaesthetised rats were secured in a supine position and organ samples were taken from the liver. The liver tissues were quickly harvested. The tissues were treated with liquid nitrogen and were used for RNA extraction and immunoblotting.
Extraction of protein and Western blot analysis
The previously developed procedures with slight modifications were used to perform SDS-PAGE and western blot investigations. The protein concentration was estimated by Bradford assay. For western blotting 8–12% polyacrylamide gels were used to resolve 40 μM of protein, transferred on to a nitrocellulose membrane, probed with appropriate monoclonal primary antibodies, and detected by super signal west Pico, Dura or Femto Chemiluminescence Reagent (Thermo Scientific, USA). Quantification of protein bands was done through measuring band density using Image J software. The densities of the bands (normalised to actin) relative to that of the untreated control (designated as 1.00) were presented as mean ± SEM of three separate experiments.
Gene expression analysis
Total RNA from frozen liver was extracted by using kit, according to the manufacturer’s instructions (Promega, CatLog No: Z3101). The cDNA synthesis was performed using the Applied Biosystems™ High-Capacity cDNA Reverse Transcription Kit. The reaction mixture was prepared containing 10 µL FastStart Universal SYBR Green Master (Roche, Germany), 6 µM reverse primers, and 10 µg cDNA, with RNAase free water added to a total volume of 20 µL. The amplification and real-time analysis were done for 40 cycles with following factors; 95 °C (10 min.) in order to activate of FastStart Taq DNA polymerase; 60 °C (1 min.) for amplification and real-time analysis. The gene expression levels were determined using 2-ΔΔCT. Primer sequences used are shown below:
Primers
Candidate gene primer
COX-2 F: 5′-CACTCATGAGCAGTCCCCTC-3′
R: 5′-ACCCTGGTCGGTTTGATGTT-3′
Molecular docking of compounds against COX-2 protein
Three-dimensional structure of the Cox-2 gene was developed using homology modelling. Modeller 9.17 was employed to predict the structure using templates (5F1A, 5IKQ, 5F19) downloaded from PDB. All of the models showed more than 90% identity with our protein. The predicted structure was further refined by energy minimisation. Finally, the structure was validated using the Ramachandran plot. Furthermore, three-dimensional structures of all synthetic compounds and Sulindac were constructed using Chem 3 D Pro 12.0 version. The protein-ligand docking analysis was performed using online PatchDock server. Three-dimensional structures of protein and ligands were used as input. PatchDock server rated the all possible docking confirmations using minimum ACE (Atomic contact energies). Finally, the docking confirmations were visualised using Pymol and LigPlus.
Results and discussion
Chemistry
Scheme 1 illustrates the synthesis of the acetohydrazide derivatives (1 – 25). The compound acetohydrazide (III) was synthesised by refluxing methyl ester of sulindac and hydrazine hydrate (99%) in the presence of absolute ethanol. Sulindac methyl ester (II) was synthesised from sulindac by refluxing in methanol with concentrated sulphuric acid according to the reported procedure.
Scheme 1. Synthetic route of compounds (1‒25).
The acetohydrazide (III) was used as a starting material for the synthesis of various substituted sulindac hydrazone derivatives (1 – 25). The acetohydrazide (III) was reacted substituted benzaldehydes in ethanol and glacial acetic acid as a catalyst. The acetohydrazide was characterised by the appearance of singlet peak for the –NH2 protons at δ 3.38 ppm and broad singlet for the CONH proton at δ 9.30 ppm. The disappearance of NH2 protons at δ 3.38 ppm confirmed the structures of sulindac hydrazones. Carbon-13 NMR confirmed all the carbon atoms of the synthesised compounds (1‒25). Mass spectroscopy confirmed the molecular weights of compounds. All the compounds were characterised by their molecular ion peaks. The three methyl protons of the indene moiety appeared in the range of δ 2.18‒2.23 ppm. The three protons of –SOCH3 appear at δ 2.81‒2.83 ppm. The aromatic protons appeared in the range of δ 6.71‒8.24 ppm. Protons of the N=CH appeared as a singlet in the range of δ 7.92‒8.52 ppm and the proton of CONH appeared as broad singlet at δ 9.30‒11.80 ppm.
Antioxidant activity
The synthesised compounds (1‒25) were evaluated for their antioxidant activity by DPPH method (. All the compounds exhibit antioxidant activity from (18.53 ± 4.86) to (85.10 ± 6.80) as compared to standard drug BHT (90.6 ± 3.83) ().
Figure 1. Comparison of DPPH scavenging activity of compounds (1–25) and BHT. All values are means of three replicates ± SD.
Table 1. Antioxidant activity of compounds (1–25) by DPPH method.
Structure–activity relationship (SAR)
Compound 3 (R = para dimethylaminophenyl) was found to be highly potent antioxidant (85.10 ± 6.80). Compounds 1 (R = phenyl), 7 (R = 3-methoxyphenyl), 23 (R = 2,4,6-trimethoxyphenyl), 13 (R = 2,3,dimethoxyphenyl), 22 (R = 2,3,4-trimethoxyphenyl) and 17 (R = 3-hydroxy, 4-methoxy) were found to be significantly active as antioxidants as compared to BHT. Compounds containing hydroxyl phenyl substitutions were found to be week antioxidants. Compounds 8 (R = 2-nitrophenyl) and 10 (R = 4-nitrophenyl) were found to be least active as antioxidants. Electron donating groups like methoxy, were found to have positive effect while as electron withdrawing groups like nitro, was found to have negative effect on antioxidant activity. Compound 3 having para dimethylaminophenyl group was found to be the most potent anti-oxidant compound.
Analgesic activity
Tail flick method
Tail flick method was used for testing the analgesic activity of compound 3. After 30 min, the % inhibition of test compound 3 was 3.33% as compared to reference drug sulindac with 13.79%. The testing compound 3 expressed significant activity of 46.66% inhibition compared to reference drug sulindac with 82.75 inhibition after 60 min (). Highly significant analgesic activity (63.33% inhibition) was observed after 120 min for the compound 3 as compared to reference compound, sulindac.
Table 2. Analgesic effect of drugs by Tail flick method in mice.
Hot plate method
Hot plate method was used for testing the analgesic activity. After 30 min, the % inhibition of test compound 3 was 15% as compared to reference drug sulindac with 41.30%.The testing compound 3 expressed highly significant activity of 67.50% inhibition compared to reference drug sulindac with 86.95 inhibition after 60 min ().
Table 3. Analgesic effect of drugs by Hot Plate method in mice.
Acetic acid –induced writhing
Acetic acid induced writhing was used for testing analgesic activity. The compound 3 expressed significant analgesic activity of 58.56% inhibition compared to reference drug sulindac with 74.1% inhibition ().
Table 4. Analgesic effect of drugs by acetic acid-induced writhing in mice.
Yeast-induced hyperthermia
Yeast-induced hyperthermia was used for testing analgesic activity in mice. The compound 3 expressed significant analgesic activity of after 120 min as compared to reference drug sulindac ().
Table 5. Effect of compound 3 and sulindac on yeast-induced hyperthermia in mice.
Anti-inflammatory activity
Based on the in vitro antioxidant activity, compound 3 was selected for in vivo anti-inflammatory activity by carrageenan induced paw edoema method. The anti-inflammatory activity of tested compound 3 after 3 and 5 h ranges from 50.52 to 50.54%, respectively compared to reference drug sulindac, which showed 65.18% after 3 h and 65.02% after 5 h (). Because of hydrazide substitution of para dimethylaminophenyl group, compound 3 presented significant anti-inflammatory activity.
Table 6. Anti-inflammatory activity of drugs by carrageenan-induced paw edoema method in albino rats.
The significant anti-inflammatory activity of compound 3 was observed
Ulcerogenic activity
The compound 3 was further evaluated for ulcerogenic and lipid peroxidation activity. Equimolar concentration of compound 3 and reference drug sulindac was administered as oral doses to the examined animals. Compound 3 demonstrated highly significant ulcerogenic reduction activity 4.33 ± 0.40 (40.90% inhibition) as compared to reference drug sulindac with 6.83 ± 0.40 (6.81% inhibition) ().
Table 7. Ulcer study of drugs using 80% Ethanol.
Ulcer study with indomethacin
Compound 3 was further evaluated for its ulcerogenicity as compared to indomethacin. Maximum ulcerogenic activity was observed in indomethacin (37.00 ± 1.59) as ulcer index. Sulindac (100 mg/kg) also produced the ulcer with ulcer index (32.00 ± 3.86) whereas compound 3 demonstrated a significant ulcerogenic reduction activity (22.16 ± 1.10) with 40.09% inhibition ().
Table 8. Ulcer study of drugs compared with Indomethacin
Compound 3 with para dimethylaminophenyl substitution was found to be the most potent anti-inflammatory and analgesic derivative as well as a significant gastric sparing activity.
MDA, NP-SH, total protein content in gastric tissue
It has been known that the reduction of malondialdehyde (MDA) content in gastric tissue is consistent with the reduction of ulcerogenic activity. Compound 3 has shown a maximum reduction in the lipid peroxidation and gastric ulceration. The MDA content in compound 3 group was found to be (1.06 ± 0.02 nmol/g) as compared to the 80% ethanol group (6.53 ± 0.56 nmol/g) ().
Table 9. Anti-oxidant activity, MDA, NP-SH and total protein of drugs in stomach tissue of rat.
Toxicity of compound 3
Karber method was used to determine the LD50 of compound 3. The LD50 of compound 3 was found to be 131 mg/kg ().
Table 10. LD50 determination of compound 3.
Effect of compound 3 on COX-2 mRNA expression in cisplatin induced hepatotoxicity in rats
The expression of COX-2 is increased by pro-inflammatory meditaorsCitation28. Furthermore, the previous studies have revealed the increased COX-2 mRNA expression in cisplatin-induced hepatotocityCitation29. Hence we characterised the effect of compound 3 administration on cisplatin-induced hepatotoxicity by measuring COX-2 mRNA levels in cisplatin-treated rats, untreated control rats, DMSO-treated rats, cisplatin–compound 3 treated (20 and 40 mg/kg) rats. Cisplatin‐induced hepatotoxicity was categorised by a significant increase in liver tissue gene expression of COX‐2 (P < 0.001), when compared to normal values. Co-treatment of cisplatin‐treated rats with compound 3 significantly downregulated liver tissue gene expression of COX‐2 (P < 0.001), as compared to the cisplatin values. Furthermore, co-treatment of cisplatin‐treated rats with 40 mg/kg dose of compound 3 significantly normalised liver COX‐2 gene expression ().
Figure 2. Quantitative real-time PCR analysis for COX-2 mRNA expression in hepatocytes of treated and untreated rats with actin as housekeeping gene. Data analysed by one-way analysis of variance using graph pad prism 8. Asterisks **** indicate p < 0.0001 significance from control and vehicle group, ++++ indicates p < 0.0001 significance from cisplatin (CP 12 mg/kg) treated group and ## indicate p < 0.01 significance difference between CP + T (20 mg/kg) and CP + T (40 mg/kg) treatment groups. T stands for compound 3 treatment.
Compound 3 administration induced reticence of COX-2 protein expression in liver tissue
We further examined the anti-inflammatory effect of compound 3 in liver tissues in cisplatin administrated rats by measuring protein expression of inflammatory mediators. In this regards, a substantial increase in COX-2 protein level was observed in the liver tissues isolated from cisplatin-administrated rats against untreated, control rats. The animals treated with compound 3 prior to cisplatin treatment resulted in a significant reduction in COX-2 protein expression when compared to cisplatin-treated group ().
Figure 3. Effect of compound 3 treatment in regulating COX-2 protein expression in liver tissues of rats inoculated with cisplatin (12 mg/kg dose). Immunoblot analysis of COX-2 and β-actin in rat hepatocytes (n = 7). CP: cisplatin, T: compound 3 treatments.
The binding affinities of all the synthesised compound (1 – 25) and Sulindac with Cox-2 were predicted using geometry-based molecular docking. The binding affinities of the compounds were demonstrated by PatchDock server with ACE values (). The lower ACE value is considered to be associated with better ligand affinity with the enzymeCitation30. Compound 3 showed lower ACE values (−440.29 kJ/mol) as compared to the standard drug Sulindac (−325.99 kJ/mol). This data suggests a better binding affinity of the compound 3 with Cox-2 protein as compared to the Sulindac (). The visualisation of the docked complex revealed two hydrogen bonds by compound 3 with Cys-32 and Tyr-116, along with many hydrophobic interactions (. While Sulindac showed only the hydrophobic interaction with the protein in the docked complex (). It can be speculated that the formation of hydrogen bonds by compound 3 is responsible for the better affinity of the compound as compared to Sulindac.
Figure 4. The orientation of docked compounds with Cox-2. The Sulindac is shown in blue colour while the compound 3 is shown in green colour. (A) The orientation of docked molecules is shown in sticks format. (B) The orientation of docked molecules is shown in spheres format.
Figure 5. The orientation of Cox-2 residues making interactions with ligands (green) in 3 D confirmation. (A) The binding of drug Sulindac with Cox-2 protein. The amino acids residues are making hydrophobic interaction with drug. (B) The binding of compound 3 with Cox-2 protein. The amino acids residues are making two hydrogen bonds and hydrophobic interaction with the compound. (C) The Cys-32 and Tyr-116 making hydrogen bonds with compound 3.
Figure 6. 2D map of interactions of Cox-2 protein with Sulindac (A) and compound 3 (B).
Table 11. Docking energies of compounds (1–25) and sulindac.
Conclusion
In conclusion, novel sulindac hydrazide derivatives (1–25) were synthesised in good yields and characterised by spectral data and elemental analysis. Chemical modification to the sulindac acetohydrazide scaffold resulted in twenty-five derivatives with significant antioxidant activity. Compound 3 containing para dimethylaminophenyl group was found to be having highly potent antioxidant activity. It was evaluated for in vivo anti-inflammatory and various analgesic and ulcerogenic activity different animal models and was found to be significant anti-inflammatory and analgesic agent. It demonstrated significant ulcerogenic reduction activity in ethanol and indomethacin model. The LD50 of compound 3 was found to be 131 mg/kg. Compound 3 with para dimethylaminophenyl substitution was found to be the most potent anti-inflammatory and analgesic derivative as well as a significant gastric sparing agent. Compound 3 significantly downregulated liver tissue gene expression of COX‐2. The animals treated with compound 3 prior to cisplatin treatment resulted in a significant reduction in COX-2 protein expression when compared to cisplatin-treated group.
Author contributions
Investigation, Ahmed M. Naglah, Suhail Razak; Methodology, Abdulrahman A. Almehizia; Administration, Mohamed A. Al-Omar; Resources; software, Nawaf A. Alsaif; Supervisor, Mashooq A. Bhat; Manuscript writing and editing, Azmat Ali Khan; Molecular docking, Naeem Mahmood Ashraf.
Disclosure statement
No potential conflict of interest was reported by the author(s).
Data Availability
Samples of the compounds (1‒25) in pure form are available from authors.
Additional information
Funding
References
- Robert A, Nezamis JE, Lancaster C, et al. Mild irritants prevent gastric necrosis through “adaptive cytoprotection mediated by prostaglandins”. Am J Physiol 1983;245:G113–21.
- Khatri CK, Indalkar KS, Patil CR, et al. Novel 2-phenyl-4,5,6,7-tetrahydro[b]benzothiophene analogues as selective COX-2 inhibitors: Design, synthesis, anti-inflammatory evaluation, and molecular docking studies. Bioorg Med Chem Lett 2017;27:1721–6.
- Abdelgawad MA, Bakr RB, Azouz AA. Novel pyrimidine-pyridine hybrids: synthesis, cyclooxygenase inhibition, anti-inflammatory activity and ulcerogenic liability. Bioorg Chem 2018;77:339–48.
- Banerjee AG, Das N, Shengule SA, et al. Synthesis, characterization, evaluation and molecular dynamics studies of 5, 6-diphenyl-1,2,4-triazin-3(2H)-one derivatives bearing 5-substituted 1,3,4-oxadiazole as potential anti-inflammatory and analgesic agents. Eur J Med Chem 2015;101:81–95.
- Chandrashekharappa S, Venugopala KN, Tratrat C, et al. Efficient synthesis and characterization of novel indolizines: exploration of in vitro COX-2 inhibitory activity and molecular modelling studies. New J Chem 2018;42:4893–901.
- Banerjee AG, Das N, Shengule SA, et al. Design, synthesis, evaluation and molecular modelling studies of some novel 5,6-diphenyl-1,2,4-triazin-3(2H)-ones bearing five-member heterocyclic moieties as potential COX-2 inhibitors: a hybrid pharmacophore approach. Bioorg Chem 2016;69:102–20.
- Bhat MA, Ahmed AF, Wen ZH, et al. Synthesis, anti-inflammatory and neuroprotective activity of pyrazole and pyrazolo[3,4-d]pyridazine bearing 3,4,5- trimethoxyphenyl. Med Chem Res 2017;26:1557–66.
- Bhat MA, Al-Omar MA, Ansari MA, et al. Design and synthesis of N-arylphthalimides as inhibitors of glucocorticoid-induced TNF receptor-related protein, proinflammatory mediators, and cytokines in carrageenan-induced lung inflammation. J Med Chem 2015;58:8850–67.
- Romeiro NC, Leite RD, Lima LM, et al. Synthesis, pharmacological evaluation and docking studies of new sulindac analogues. Eur J Med Chem 2009;44:1959–71.
- Fogli S, Banti I, Stefanelli F, et al. Therapeutic potential of sulindac hydroxamic acid against human pancreatic and colonic cancer cells. Eur J Med Chem 2010;45:5100–7.
- Mathew B, Hobrath JV, Connelly MC, et al. Diverse amide analogs of sulindac for cancer treatment and prevention. Bioorg Med Chem Lett 2017;27:4614–21.
- Mathew B, Snowden TS, Connelly MC, et al. A small diversity library of α-methyl amide analogs of sulindac for probing anticancer structure-activity relationships. Bioorg Med Chem Lett 2018;28:2136–42.
- Liedtke AJ, Crews BC, Daniel CM, et al. Cyclooxygenase-1-selective inhibitors based on the (E)-2'-des-methyl-sulindac sulfide scaffold. J Med Chem 2012;55:2287–300.
- Felts AS, Siegel BS, Young SM, et al. Sulindac derivatives that activate the peroxisome proliferator-activated receptor gamma but lack cyclooxygenase inhibition. J Med Chem 2008;51:4911–9.
- Amir M, Kumar S. Anti-inflammatory and gastro sparing activity of some new indomethacin derivatives. Arch Pharm 2005;338:24–31.
- Bhat MA, Al-Omar MA, Raish M, et al. Indole derivatives as cyclooxygenase inhibitors: synthesis, biological evaluation and docking studies. Molecules 2018;23:1250.
- Furness B, Hannaford AH, Smith PWG, Tatchell AR, Vogels Text book of practical organic chemistry. 5th ed. London: Addison Wesely Longman, Inc.; 1998:1077‒78.
- Braca A, De Tommasi N, Di Bari L, et al. Antioxidant principles from Bauhinia tarapotensis. J Nat Prod 2001;64:892–5.
- Loux JJ, De Palma PD, Yankell SL. Antipyretic testing of aspirin in rats. Toxicol Appl Pharmacol 1972;22:672–‒5.
- D’Amour FE, Smith DL. A method for determining loss of pain sensation. J Pharmacol Exp Ther 1941;72:74–9.
- Turner RA. Analgesic. In: Turner RA, ed. Screening methods in pharmacology. London: Academic Press; 1965.
- Winter CA, Risley EA, Nuss GW. Carrageenin-induced edema in hind paw of the rat as an assay for antiiflammatory drugs. Proc Soc Exp Biol Med 1962;111:544–7.
- Yu C, Mei XT, Zheng YP, Xu DH. Gastroprotective effect of taurine zinc solid dispersions against absolute ethanol-induced gastric lesions is mediated by enhancement of antioxidant activity and endogenous PGE2 production and attenuation of NO production. Eur J Pharmacol 2014;740:329–36.
- Bhargava KP, Gupta MB, Tangri KK. Mechanism of ulcerogenic activity of indomethacin and oxyphenbutazone. Eur J Pharmacol 1973;22:191–5.
- Utley HG, Bernheim F, Hochstein P. Effect of sulfhydryl reagents on peroxidation in microsomes. Arch Biochem Biophy 1967;118:29–32.
- Sedlak J, Lindsay RH. Estimation of total, protein-bound, and nonprotein sulfhydryl groups in tissue with Ellman's reagent. Anal Biochem 1968;25:192–205.
- Karber G. Beitrag zur kollektiven Behandlung pharmakologischer Reihenversuche. Arch Exptl Pathol Pharmakol 1931;162:480–3.
- Kim HJ, Kim KW, Yu BP, et al. The effect of age on cyclooxygenase-2 gene expression: NF-kappaB activation and IkappaBalpha degradation. Free Radic Biol Med 2000;28:683–92.
- Kim SH, Hong KO, Chung WY, et al. Abrogation of cisplatin-induced hepatotoxicity in mice by xanthorrhizol is related to its effect on the regulation of gene transcription. Toxicol Appl Pharmacol 2004;196:346–55.
- Ashraf NM, Krishnagopal A, Hussain A, et al. Engineering of serine protease for improved thermostability and catalytic activity using rational design. Int J Biol Macromol 2019;126:229–37.