Supersonic dislocation stability and nano-twin formation at high strain rate

Abstract

Improved understanding of the plastic deformation of metals during high-strain-rate shock loading is key to predicting their resulting material properties. This paper presents the results of molecular-dynamics simulations which address two fundamental questions related to materials deformation: the stability of supersonic dislocations and the mechanism of nano-twin formation. The results show that aluminium plastically deforms by the subsonic motion of edge dislocations when subjected to applied shear stresses of up to 600 MPa. Although higher applied stresses initially drive transonic dislocations, this motion is transient, and the dislocations decelerate to a sustained subsonic saturation velocity. Slowing of the transonic dislocation is controlled by the interaction with excited Rayleigh waves. 800 MPa marks a critical shear stress at which dislocation glide gives way to nano-twin formation via the homogeneous nucleation of Shockley partial dislocation dipoles. At still higher applied stresses, additional dislocation dipole nucleation produces a mid-stacking fault transformation of the twinned material.

Acknowledgements

This work was performed under the auspices of the US Department of Energy by the University of California, Lawrence Livermore National Laboratory under Contract No. W-7405-Eng-48. The authors acknowledge support from the ASCI Dynamics of Metals Program. The authors would also like to thank Maria Jose Caturla of Universitat d’Alacant, Alacant Spain for her suggestions and insights.