Two hardening mechanisms in single crystal thin films studied by discrete dislocation plasticity

Abstract

Two-dimensional discrete dislocation plasticity simulations of the evolution of thermal stress in single crystal thin films on a rigid substrate are used to study size effects. The relation between the residual stress and the dislocation structure in the films after cooling is analyzed using dislocation dynamics. A boundary layer characterized by a high stress gradient and a high dislocation density is found close to the impenetrable film-substrate interface. There is a material-dependent threshold film thickness above which the dislocation density together with the boundary layer thickness and stress state are independent of film thickness. In such films the stress outside the boundary layer is on average very low, so that the film-thickness-independent boundary layer is responsible for the size effect. A larger size effect is found for films thinner than the threshold thickness. The origin of this size effect stems from nucleation activity being hindered by the geometrical constraint of the small film thickness, so that by decreasing film thickness, the dislocation density decreases while the stress in the film increases. The size dependence is only described by a Hall–Petch type relation for films thicker than the threshold value.

Acknowledgements

This research was carried out under project number MS97007 in the framework of the Strategic Research Program of the Netherlands Institute for Metals Research in the Netherlands (www.nimr.nl). A.N. is pleased to acknowledge support from the Materials Research Science and Engineering Center on On Micro-and-Nano-Mechanics of Electronic and Structural Materials at Brown University (NSF Grant DMR-0079964).