Transmission electron microscopy and X-ray diffraction study of microstructural evolution in magnetoresistive Cu–Fe–Ni ribbons

Abstract

The evolution of the microstructure of a granular Cu₈₀Fe₁₀Ni₁₀ (at%) melt-spun ribbon is studied by transmission electron microscopy (TEM), energy-filtered transmission electron microscopy (EFTEM) and X-ray diffraction. This system is interesting as large giant magnetoresistance (GMR) values have been measured for this composition. We have shown the presence of two face-centred cubic phases, an (Fe,Ni)-rich phase and a Cu-rich phase. The lattice parameters of these two phases are close and no diffraction or elastic contrast is involved in displaying the two phases in TEM bright-field mode. With EFTEM imaging, we have shown the presence of a fine-scale (Fe,Ni)-rich precipitation inside the Cu-rich fcc matrix. The precipitates are 2–4 nm in the as-spun state and 4–6 nm after annealing for 2 h at 400°C. The lattice parameter of the Cu-rich phase in the as-spun sample is 0.3608 nm and 0.3610 nm for the (Fe,Ni)-rich phase. After a 24-h annealing treatment at 600°C, the mean diameter of the particle is 20 nm and the lattice parameter of the (Fe,Ni)-rich phase has decreased to 0.3600 nm, while that of the Cu-rich phase has increased to 0.3613 nm, which is consistent with a segregation of Fe and Ni in the precipitates. The composition and volume fraction of the two phases measured for this annealed sample are in good agreement with the Thermocalc® predictions.

Keywords:

• transmission electron microscopy
• X-ray diffraction
• giant magneto resistance

Acknowledgements

M. Barrico (Dipartimento di Chimica IFM and INFM/INSTM, Università di Torino, Torino, Italy) is acknowledged for providing the ribbons.