Climb via vacancy diffusion of edge dislocations in 2D dislocation microstructures

Abstract

The prevention of strength degradation of components is one of the great challenges in solid mechanics. In particular, at high temperatures material may deform even at low stresses, a deformation mode known as deformation creep. One of the microstructural mechanisms that governs deformation creep is dislocation motion due to the absorption or emission of vacancies, which results in motion perpendicular to the glide plane, called dislocation climb. However, the importance of the dislocation network for the deformation creep remains far from being understood. In this study, a climb model that accounts for the dislocation network is developed, by solving the diffusion equation for vacancies in a region with a general dislocation distribution. The definition of the sink strength is extended, to account for the contributions of neighbouring dislocations to the climb rate. The model is then applied to dislocation dipoles and dislocation pile-ups, which are dense dislocation structures and it is found that the sink strength of dislocations in a pile-up is reduced since the vacancy field is distributed between the dislocations. Finally, the importance of the results for modelling deformation creep is discussed.

Keywords:

• Dislocation climb
• vacancy diffusion
• edge dislocations
• thermal creep
• dislocation pile-up
• dislocation dipole

Notes

No potential conflict of interest was reported by the authors.

Additional information

Funding

This research was partially supported by the Israel Science Foundation [grant number 1656/12].