33
Views
0
CrossRef citations to date
0
Altmetric
Research Article

Smart Design of Wireless Data Transmission Employing Solar-Powered IOT Devices

, , , , , , , & show all
Received 24 Jun 2023, Accepted 17 Dec 2023, Published online: 11 Jan 2024
 

Abstract

This study emphasizes the expanding need for solar energy extraction over the past few decades and focuses on the crucial role that solar photovoltaics (PV) play in the renewable energy environment. The surge in demand has driven attention toward enhancing monitoring technologies to maximize their efficiency. The paper introduces a novel wireless platform aimed at augmenting the monitoring of solar PV systems. This innovative approach enables wireless data transmission from a diverse array of sensors and nodes, addressing various challenges, including data volume management, potential signal interference, long-distance data transfer requirements, and data security concerns. The research findings underline the necessity of a minimum 14 Ah battery capacity to accommodate seasonal fluctuations in solar irradiation. A crucial aspect of the study lies in the implementation of an adaptive power system, which significantly alleviates the demand for batteries when the state of charge falls below 30%. This adaptive system not only ensures cost-effective data transmission rates but also offers the potential to maintain system functionality with smaller battery and solar panel configurations. Additionally, it enhances reliability under varying light conditions, mitigating the risk of system failure.

ACKNOWLEDGEMENT

The authors appreciate the supports from Nagarjuna college of Engineering and Technology, Bengaluru for the research and preparation of the manuscript.

DISCLOSURE STATEMENT

No potential conflict of interest was reported by the author(s).

DATA AVAILABILITY STATEMENT

Data sharing not applicable to this article as no datasets were generated or analyzed during the current study.

Additional information

Funding

The authors are grateful to the Researchers Supporting Project number [RSPD2023R669], King Saud University, Riyadh, Saudi Arabia, for the financial support.

Notes on contributors

T.V.V. Pavan Kumar

T.V.V. Pavan Kumar working as an Associate Professor in the Department of Electrical Engineering of KG Reddy College of Engineering and Technology, Hyderabad has about 19 years of teaching experience. He received his B.Tech degree in Electrical and Electronics Engineering from Dr Paul Raj Engineering College, and M.Tech. degree in High Voltage Engineering with distinction from JNTU Kakinada University. Received Ph.D degree in Electrical Engineering in 2018 from Shri Venkateshwara University. Published 30 research papers in refereed international journals and 15 research papers in the proceedings of various international conferences. His areas of research include Power Quality, Renewable energy systems and Microgrid. He is an active senior member of IEI, WIE. Also Reviewers of various Journals.

G.S. Prasanna Lakshmi

G.S. Prasanna Lakshmi currently working as Associate Professor, Nagarjuna College of Engineering & Technology, Devanahalli, Bengaluru, She received her Ph.D (Mobile Ad-Hoc Networks) from Visvesvaraya Technological University, Belgavi in the year 2020.She graduated in the year 2010, M.Tech (Computer science & Engineering) from Sri Jagadguru Chandrashekaranatha Swamiji Institute of Technology, Chickaballapur. She has teaching experience of more than 12 years in the areas of Mobile Ad-Hoc Networks, Wireless Sensor Networks and cyber security. She has Presented and Published more than 10 Research articles in reputed journals and published 5 patents in Indian government and 1 Patent in Australian Government. Mrs Vidhyashree B working as an Assistant Professor in Madanapalle Institute of Technology and Science, Madanaplle, Andhra Pradesh, She is pursuing PhD in Visvesvaraya Technological University, Belgavi, She has completed M.Tech (Computer science & Engineering) from NITTE Meenakshi Institute of Technology, Bengaluru in the year 2015 and B E (Information Science and Engineering) from Sambhram Institute of Technology, Bengaluru, in the year 2013. She has teaching experience of more than 7 years. The area of research is Machine Learning, Data Science and Artificial Intelligence. She has Presented and Published more than 5 Research articles in reputed journals and published 2 patents in Indian government.

S. Kalaivani

S. Kalaivani received her Ph.D. in Electronics and Communication at B. S. Abdur Rahman Crescent Institute of Science and Technology, Chennai. Her interest lies in the areas of Wireless Communications, Wireless Sensor Networks (WSN) and Internet of Things (IoT). At present she works as Assistant Professor (Selection Grade) in B.S.A Crescent Institute of Science and Technology, Chennai, Tamil Nadu, India. She has a total teaching experience of 16 years. She has published several papers in peer reviewed International Conferences and Journals. She is a member of ISTE and IEI.

M. Kavitha

M. Kavitha is working as an Assistant Professor in the department of Computer Science and Engineering at K. Ramakrishnan College of Engineering (Autonomous), Trichy, Tamil Nadu, India. She graduated her B.E degree in Information Technology from Anna University Chennai, India. She received her M.E degree in Computer Science and Engineering from Anna University Chennai, India. She is pursuing her Ph.D degree in the area of Machine Learning in Anna University Chennai. She has published her research papers in various refereed international journals.

S. Binny

S. Binny Associate professor, Department of computer Application, Kristu Jyoti college of management and technology, Kerala, India, She is research and IPR cell coordinator, she had 20 years of teaching experience, guided UG and PG students projects. She received many awards including excellence in research, Bharat Education Excellence Award for yuva acharya, best teacher award, she has professional membership like IAENG, IACSET, FMERU and FSIESRP She is an Editorial Board Member of ISRP, Malaysia. Convenor of various international Conferences. She had attended may workshops and webinar. Reviewer of many conferences.

A. Sheela

A. Sheela received her undergraduate degree in Electrical & Electronics Engineering in 2001, Master of Engineering in Power Systems in 2004 and subsequently her Ph.D. in Electrical Engineering in 2016. The Kavery Engineering College Mexheri, Salem Tamil Nadu 636453, India. She has published around 50 papers in various international conferences and journals to his credit. She has received funding from IIT-Madras for pursuing research project. Her research interests include smart grid, soft computing and cyber-security. Email: [email protected].

P. Ganeshan

P. Ganeshan is working as Professor in the Department of Mechanical Engineering in Sri Eshwar College of Engineering, Coimbatore, Tamil Nadu, India since December 2021. He had completed Bachelor of Engineering in Mechanical Engineering in 2006 and Post Graduate in Engineering Design in 2013 from Anna University, Chennai, Tamil Nadu, India. He obtained his Doctorate in Mechanical Engineering, Anna University Chennai in 2017 and has more than 15 years of experience in research, teaching and industry. He has published 85 research article in peer reviewed Journals and participated over 10 National and international conferences. His area of research is the use of the composite materials for Bio-medical applications. Currently he is guiding 08 PhD research scholars in Anna University, Chennai. His Subjects of Interest includes Engineering Mechanics, Fluid Mechanics, Strength of Materials, Theory of Machines and Design of Machine Elements and Transmission systems.

Ahmad A. Ifseisi

Ahmad A. Ifseisi received his B.Sc. degree at the top third and his M.Sc. degree at the top of his classes in 2005 and 2008, respectively, from Hashemite University, Jordan, and received his Ph.D. degree at the top of his class in 2012 from King Saud University, Saudi Arabia. Currently, he is an Assistant Professor of Analytical Chemistry at Department of Chemistry, and Researcher at Advanced Materials Research Chair, King Saud University, Saudi Arabia. He has worked as a researcher at King Abdullah Institute for Nanotechnology (Oct. 2008 – Jan. 2013), researcher assistance at Hashemite University (Mar. 2008 – Aug. 2008), and teaching assistant at Hashemite University (Oct. 2005 – Oct. 2007). He is working on a variety of separation and chromatographic topics ranging from preparation and development of packing materials for chromatographic columns to extraction and preconcentration of various organic and inorganic samples. Ahmed has published more than 80 scientific contributions; 41 original papers, 2 reviews, 3 patents, 3 book chapters, and 42 presentations in local and international conference proceedings. He received the King Saud University Award for scientific excellence, 2014, Almarai company prize for the Best Research Unit, Advanced Materials Research Chair (Team Award), 2014, fellowship for POC2012 IUPAC conference, Qatar Petroleum Company QAPCO, 2012, the vice-rectorate for graduate studies and research prize for the excellence scientific research in the King Saud University, 2011, the distinct and creator students, Hashemite University, 2008, a fully-funded Ph.D. scholarship, King Abdullah Institute for Nanotechnology, King Saud University, and a fully-funded M.Sc. scholarship, Hashemite University.

Sikandar Aftab

Sikandar Aftab earned his Ph.D. in Physics from Department of Physics and Graphene Research Institute, Sejong University, South Korea. He also completed a two-year post-doctoral fellowship at Simon Fraser University in Burnaby, Canada. Dr. Aftab is currently employed as an Assistant Professor at Sejong University's Department of Intelligent Mechatronics Engineering in Seoul, South Korea. His research interests include nanodevices based on two-dimensional materials heterostructures, energy storage devices and solar cells.

Log in via your institution

Log in to Taylor & Francis Online

PDF download + Online access

  • 48 hours access to article PDF & online version
  • Article PDF can be downloaded
  • Article PDF can be printed
USD 61.00 Add to cart

Issue Purchase

  • 30 days online access to complete issue
  • Article PDFs can be downloaded
  • Article PDFs can be printed
USD 412.00 Add to cart

* Local tax will be added as applicable

Related Research

People also read lists articles that other readers of this article have read.

Recommended articles lists articles that we recommend and is powered by our AI driven recommendation engine.

Cited by lists all citing articles based on Crossref citations.
Articles with the Crossref icon will open in a new tab.