![Sample our Physical Sciences journals, sign in here to start your FREE access for 14 days]({"type":"image" , "src" : "/sda/110819/TOC-Subject-Sample-2021-Physical-Sciences.jpg"})
Abstract
Carbon nanotubes (CNTs) are attracting great interest in enhancing rheological behavior and thermal performance of lubricating grease. In this study, CNTs were synthesized by catalytic chemical vapor deposition (CCVD) method using low-density polyethylene (LDPE) waste as a cheap carbon source and Co/MgO as an effective catalyst. The effect of temperature on the catalytic pyrolysis of LDPE to produce CNTs has been studied. Catalytic pyrolysis of LDPE waste was conducted in a temperature range of 350–600 °C using the H-ZSM-5 catalyst. The structure and quality of CNTs were fully characterized using HR-TEM, XRD, and Raman spectroscopy. On the other hand, various concentrations of CNTs (0.2, 0.4, 0.6, 0.8, and 1.0 wt%) were mixed with pure lithium grease to determine the optimum percentage that improves the properties of nano-grease. The results showed that a high yield of multiwalled carbon nanotubes (MWCNTs) was obtained with high quality at temperatures ranging from 400 to 550 °C. Also, the addition of CNTs enhanced the rheological behavior of lithium grease, and the optimum percentage of CNTs was 0.8 wt%. Furthermore, the apparent viscosity and shear stress of lithium nano-grease increased by increasing the concentration of CNTs up to 0.8%. At this concentration, the penetration value of lithium nano-grease was greater than pure grease, and the dropping point increased by 12.5%. These results suggested that CNTs prepared from LDPE waste were an excellent additive to enhance the physicochemical properties of lithium grease.
Acknowledgment
The authors sincerely acknowledge funding.