Thermo-mechanical behaviors of 3-D braided composite material subject to high strain rate compressions under different temperatures

ABSTRACT

This article reports the compressive behaviors of 3-D braided basalt fiber tows/epoxy composite materials under the temperature range of 23–210°C with the strain-rate range of 1300–2300 s⁻¹. A split Hopkinson pressure bar apparatus with a heating device was designed to conduct the out-of-plane compression tests. It was found that compression modulus, specific energy absorption, and peak stress decreased with the elevated temperatures, while failure strain gradually increased with the elevated temperatures. Compression modulus and peak stress were more sensitive to the temperature effect, whereas failure strain and specific energy absorption were more easily affected by the strain rate effect. The plasticity can be divided into two types: (a) the platform-shape plasticity; or (b) the slope-shape plasticity. The experimental condition of 150°C with 1827 s^–1 was a dividing threshold to differentiate the compression-failure mode and the shear-failure mode. The authentic microstructural finite element analysis results revealed that the distribution and accumulation of the inelastic heat led to the development of shear bands. Braided reinforcement had an important influence on the damage characteristics. When the temperature was below T_g, the material underwent a significant temperature rise during failure. But above T_g, the temperature rise was relatively steady.

KEYWORDS:

• 3-D braided composite
• thermo mechanical
• finite element analysis (FEA)
• strain rate
• compression

Funding

The authors acknowledge the financial support from the National Science Foundation of China (No. 11272087) and the Fok Ying-Tong Education Foundation (Grant No. 141070). The financial support from the Foundation for the Author of National Excellent Doctoral Dissertation of PR China (No. 201056), the Key Grant Project of Chinese Ministry of Education (No. 113027A), Shanghai Science and Technology Innovation Action Plan (Nos. 12521102400 and 12dz1100407), and the Chinese Universities Scientific Fund (CUSF-DH-D-2014002) are also gratefully acknowledged.