![Sample our Built Environment journals, sign in here to start your access, Latest two full volumes FREE to you for 14 days]({"type":"image" , "src" : "/sda/5926/TOC-Subject-Sample-2021-Built-Environment.jpg"})
Abstract
Recent research and technology have provided promising outcomes to rely on biodiesel as the alternative and conventional source of fuel. The use of renewable sources constitutes the main stream of research. Waste Cooking Oil (WCO) was used for biodiesel production in this study. Lipase enzyme producing fungi Rhizopus oryzae 262 and commercially available pure lipase enzyme were used for comparative study in the production of FAAE. The whole cell biocatalyst and pure enzyme were immobilized using calcium alginate beads. It was prepared by optimizing with different molar ratios of calcium chloride and different percent sodium alginate. Entrapment immobilization was done for whole cell biocatalyst. PE was also immobilized by entrapment for the transesterification reaction. Four different solvents methanol, ethanol, n-propanol, n-butanol were used as the acyl acceptors. The reaction parameters like temperature, molar ratio, reaction time, and amount of enzyme to be used were also optimized for methanol alone. The same parameters were adopted for the other acyl acceptors too. Among the different acyl acceptors, methanol whose reaction parameters were optimized showed maximum conversion of triglycerides to FAAE - 94% with PE and 84% with WCB. On the whole, PE showed better catalytic converting ability with all the acyl acceptor compared to WCB, further study, it was observed that three consecutive and reversible reactions occurred in the interesterification of triglycerides. So, a kinetic model based on Michaelis-Menten equation with competitive substrate inhibition was used to find the maximum reaction rate Vi for the four solvents using pure enzyme and WCB.