Particulate and Gaseous Emissions When Welding Aluminum Alloys

Abstract

Fabrication and repair of aluminum components and structures commonly involves the use of electric arc welding. The interaction of the arc and the metal being welded generates ultraviolet radiation, metallic oxides, fumes, and gases. Aluminum is seldom used as the pure metal but is often alloyed with other metals to improve strength and other physical properties. Therefore, the exact composition of any emissions will depend on the welding process and the particular aluminum alloy being welded. To quantify such emissions, The Aluminum Association sponsored several studies to characterize arc welding emissions by the gas metal arc welding (GMAW) and gas tungsten arc welding (GTAW) processes for various combinations of base and filler alloys. In all cases, the tests were conducted under conditions that could be found in a production weld shop without forced ventilation. The concentrations of each analyte that a welder could be exposed to were greatly affected by the welding process, the composition of the base and filler alloys, the position of the welder, and the welding helmet. The results obtained can be used by employers to identify and control potential hazards associated with the welding of aluminum alloys and can provide the basis for hazard communication to employees involved in the welding of these alloys.

Keywords:

• aluminum
• GMAW
• GTAW
• welding

Notes

^A Actual analytical results not available. Alloys were tested and found to be within Aluminum Association specifications. All metals without specific limits are restricted to < 0.05% each with their combined total < 0.15%.

^B Silicon + iron. The Aluminum Association limit is for the sum of the two metals.

^C Not analyzed.

^A 75% Helium, 25% Argon.

^A Not analyzed.

^A Not analyzed.

^A Insignificant difference (p > 0.05).

^B Not analyzed.