Index to pages by month
D1–D14, 1–58 January D59–D76, 401–466 July
D15–D20, 59–122 February D77–D80, 467–512 August
D21–D24, 123–186 March D81–D96, 513–572 September
D25–D30, 187–266 April D97–D108, 573–624 October
D31–D42, 267–336 May D109–D124, 625–700 November
D43–D58, 337–400 June D125–D151, 701–780 December
2011 AUTHOR INDEX
A
ABELMANN, A.: Characterization of Formaldehyde Exposure Resulting from the Use of Four Professional Hair Straightening Products…………686
ABELMANN, Anders: Hazard Evaluation and Preventive Recommendations for an Unusual Confined Space Issue in an Opera Set Design…………D81
ACHTEMEIER, Gary: Personal PM2.5 Exposure Among Wildland Firefighters Working at Prescribed Forest Burns in Southeastern United States…………503
ACHUTAN, Chandran: Case Study: Occupational Exposures to Antineoplastic Drugs in an Oncology-Hematology Department…………D1
ADAMS, R.: Characterization of Formaldehyde Exposure Resulting from the Use of Four Professional Hair Straightening Products…………686
ADETONA, Olorunfemi: Personal PM2.5 Exposure Among Wildland Firefighters Working at Prescribed Forest Burns in Southeastern United States…………503
ADHIKARI, Atin: Comparison of Workplace Protection Factors for Different Biological Contaminants…………417
AHRENHOLZ, Steven: Deepwater Horizon Response Workers Exposure Assessment at the Source: MC252 Well No. 1…………D43
ALTMAIER, Ralph: Ammonia Exposure While Pumping Diesel Exhaust Fluid…………D7
ARMSTRONG, Thomas: Retrospective Occupational Exposure Assessment for Case-Control and Case-Series Epidemiology Studies Based in Shanghai China…………561
ARMSTRONG, Thomas: The Daubert Standard as Applied to Exposure Assessment Modeling Using the Two-Zone (NF/FF) Model Estimation of Indoor Air Breathing Zone Concentration as an Example…………D114
ASENSIO, C.: Assessment of Noise Exposure During Commuting in the Madrid Subway…………533
ASHLEY, Kevin (Column Editor): Integrating Direct-Reading Exposure Assessment Methods into Industrial Hygiene Practice…………D31
ASHLEY, Kevin (Column Editor): NIOSH Manual of Analytical Methods 5th Edition – New Resources and Direction…………D59
ASTRAKIANAKIS, George: Health Care Workers and Respiratory Protection: Is the User Seal Check a Surrogate for Respirator Fit-Testing?…………267
AUBURTIN, Guy: Personal Exposure to PAHs in the Refinery During Truck Loading of Bitumen…………D97
AUSEJO, M.: Assessment of Noise Exposure During Commuting in the Madrid Subway…………533
B
BALANAY, Jo Anne: Comparison of Toluene Adsorption Among Granular Activated Carbon and Different Types of Activated Carbon Fibers (ACFs)…………573
BALILIONIS, Gytis: Effects of Forearm vs. Leg Submersion in Work Tolerance Time in a Hot Environment While Wearing Fire Fighter Protective Clothing…………473
BANERJEE, Sudipto: Desktop Study of Occupational Exposure Judgments: Does Education and Experience Influence Accuracy?…………746
BANSAL, Siddharth: Anxiety During Respirator Use: Comparison of Two Respirator Types…………123
BARON, Paul: Comparison of Air Sampling Methods for Aerosolized spores of B. anthracis Sterne…………179
BARROS Leite, C.: Uranium Oxide Solubility in Simulated Lung Fluids…………D51
BEARD, Jeremy: Comparison of Air Sampling Methods for Aerosolized spores of B. anthracis Sterne…………179
BÉGIN, D.: Solvent Substitution: An Analysis of Comprehensive Hazard Screening Indices…………387
BEJAN, Anca: Exposure Assessment in Auto Collision Repair Shops…………401
BEJAN, Anca: Letters to the Editor…………D73
BENSON, Stacey: Laboratory Study to Assess Causative Factors Affecting Temporal Changes in Filtering Facepiece Respirator Fit: Part I – Pilot Study…………729
BERGLUND, Larry: Methods of Evaluating Protective Clothing Relative to Heat and Cold Stress: Thermal Manikin, Biomedical Modeling, and Human Testing…………588
BERGMAN, Michael: Impact of Three Biological Decontamination Methods on Filtering Facepiece Respirator Fit, Odor, Comfort, and Donning Ease…………426
BERMAN, D.: Potential Artifacts Associated with Historical Preparation of Joint Compound Samples and Reported Airborne Asbestos Concentrations…………271
BERTHET, Aurélie: Letters to the Editor…………D37
BERTKE, Steve: Exposure Characterization of Metal Oxide Nanoparticles in the Workplace…………580
BIAGIO, Leigh: Validity of Diagnostic Computer-Based Air and Forehead Bone Conduction Audiometry…………210
BINDER, Konrad: Ice Cooling Vest on Tolerance for Exercise Under Uncompensable Heat Stress…………484
BIRKNER, Jeffrey: Particle Release from Respirators, Part I: Determination of the Effect of Particle Size, Drop Height, and Load…………1
BIRKNER, Jeffrey: Particle Release from Respirators, Part II: Determination of the Effect of Tension Applied in Simulation of Removal…………10
BLACK, Timothy: Effect of Transfer, Lifting, and Repositioning (TLR) Injury Prevention Program on Musculoskeletal Injury Among Direct Care Workers…………226
BLANCHARD, Laurie: Methods of Evaluating Protective Clothing Relative to Heat and Cold Stress: Thermal Manikin, Biomedical Modeling, and Human Testing…………588
BLOOD, Ryan: Vehicle Design Influences Whole Body Vibration Exposures: Effect of the Location of the Front Axle Relative to the Cab…………364
BOELTER, Fred: Exposure Data from Multi-Application, Multi-Industry Maintenance of Surfaces and Joints Sealed with Asbestos-Containing Gaskets and Packing…………194
BOELTER, Fred: Factors Influencing Dust Exposure: Finishing Activities in Drywall Construction…………324
BOELTER, Fred: Development and Evaluation of a Semi-Empirical Two-Zone Dust Exposure Model for a Dusty Construction Trade…………337
BOELTER, Fred: Comparing Two-Zone Models of Dust Exposure…………513
BOENIGER, Mark: A Pilot Study of Workplace Dermal Exposures to Cypermethrin at a Chemical Manufacturing Plant…………600
BOGEN, K.: Potential Artifacts Associated with Historical Preparation of Joint Compound Samples and Reported Airborne Asbestos Concentrations…………271
BOWES, Stephen: Retrospective Occupational Exposure Assessment for Case-Control and Case-Series Epidemiology Studies Based in Shanghai China…………561
BOYLSTEIN, Randy: Correcting Diacetyl Concentrations from Air Samples Collected with NIOSH Method 2557…………59
BOYSEN, Dane: Airborne Nanoparticle Concentrations in the Manufacturing of Polytetrafluoroethylene (PTFE) Apparel…………139
BRANCH, Barbara: Silica Exposure Assessment in a Mortality Study of Vermont Granite Workers…………71
BREUER, Dietmar: Evaluation of Sampling Methods for Measuring Exposure to Volatile Inorganic Acids in Workplace Air. Part 1: Sampling Hydrochloric Acid (HCl) and Nitric Acid (HNO3) from a Test Gas Atmosphere…………492
BRORBY, Gregory: Potential Artifacts Associated with Historical Preparation of Joint Compound Samples and Reported Airborne Asbestos Concentrations…………271
BROSSEAU, Lisa: Exposure Assessment in Auto Collision Repair Shops…………401
BROSSEAU, Lisa: Letter to the Editor…………D15
BROSSEAU, Lisa: Letters to the Editor…………D73
BROSSEAU, Lisa: Occupational Exposure Guidelines – Why Process Is as Important as Science…………D109
BROWN, Lezah: Evaluating the Association of Workplace Psychosocial Stressors with Occupational Injury, Illness, and Assault…………31
BRYANT, Rodney: Characterizing Inward Leakage in a Pressure Demand, Self Contained Breathing Apparatus…………437
BRYCE, Elizabeth: Health Care Workers and Respiratory Protection: Is the User Seal Check a Surrogate for Respirator Fit-Testing?…………267
BRÅTVEIT, Magne: Excessive Exposure to Dust Among Cleaners in the Ethiopian Cement Industry…………544
BUCKLEY, Timothy: A Pilot Study of Workplace Dermal Exposures to Cypermethrin at a Chemical Manufacturing Plant…………600
BURNHAM, Tim: Effects of Forearm vs. Leg Submersion in Work Tolerance Time in a Hot Environment While Wearing Fire Fighter Protective Clothing…………473
BURSTYN, Igor: Isolation of airborne oxacillin-resistant staphylococcus aureus from culturable air samples of urban homes…………80
BUSCH, Angela: Effect of Transfer, Lifting, and Repositioning (TLR) Injury Prevention Program on Musculoskeletal Injury Among Direct Care Workers…………226
BYRNE, David: Acceptance of a Semi-Custom Hearing Protector by Manufacturing Workers…………D125
BYRNS, George: The Risks and Benefits of Chemical Fumigation in the Health Care Environment…………104
C
CADARETTE, Bruce: Methods of Evaluating Protective Clothing Relative to Heat and Cold Stress: Thermal Manikin, Biomedical Modeling, and Human Testing…………588
CARNEIRO, L.: Uranium Oxide Solubility in Simulated Lung Fluids…………D51
CARRÉ, Didier: Personal Exposure to PAHs in the Refinery During Truck Loading of Bitumen…………D97
CEBALLOS, Diana: Survey of Dermal Protection in Washington State Collision Repair Industry…………551
CHENG, Yung Sung: Letter to the Editor…………
CENA, Lorenzo: Characterization and Control of Airborne Particles Emitted During Production of Epoxy / Carbon Nanotube Nanocomposites…………86
CENTENO, Jose: Biomarkers of Mercury Exposure in Two Eastern Ukraine Cities…………187
CHAREST-TARDIF, Ginette: Letters to the Editor…………D37
CHEN, Min: Retrospective Occupational Exposure Assessment for Case-Control and Case-Series Epidemiology Studies Based in Shanghai China…………561
CHENG, Yung Sung: Letter to the Editor…………D88
CHERID, Hafsa: Performance of Two Different Limulus Amebocyte Lysate Assays for the Quantitation of Fungal Glucan…………540
CHO, Kyungmin: Comparison of Workplace Protection Factors for Different Biological Contaminants…………417
CLOUTIER, Yves: Validation of the Criteria for Initiating the Cleaning of Heating, Ventilation, and Air-Conditioning (HVAC) Ductwork Under Real Conditions…………467
COCA, Aitor: Physiological Responses to Wearing a Prototype Firefighter Ensemble Compared with a Standard Ensemble…………49
COCA, Aitor: Effects of Liquid Cooling Garments on Recovery and Performance Time in Individuals Performing Strenuous Work Wearing a Firefighter Ensemble…………409
COFFEY, Christopher: Integrating Direct-Reading Exposure Assessment Methods into Industrial Hygiene Practice…………D31
CONKO, Kathryn: Biomarkers of Mercury Exposure in Two Eastern Ukraine Cities…………187
CONNOR, Thomas: A Pilot Study of Workplace Dermal Exposures to Cypermethrin at a Chemical Manufacturing Plant…………600
CONROY, Lorraine: Evaluating the Association of Workplace Psychosocial Stressors with Occupational Injury, Illness, and Assault…………31
CONTRERAS, John: Variability and Specificity Associated with Environmental Methamphetamine Sampling and Analysis…………636
CORREA, Adolfo: Inter-Rater Reliability of Assessed Prenatal Maternal Occupational Exposures to Solvents, Polycyclic Aromatic Hydrocarbons, and Heavy Metals…………718
COUCH, James (Column Editor): Case Study: Occupational Exposures to Antineoplastic Drugs in an Oncology-Hematology Department…………D1
COUCH, James (Column Editor): Deepwater Horizon Response Workers Exposure Assessment at the Source: MC252 Well No. 1…………D43
COUCH, James (Column Editor): Safety and Chemical Exposure Evaluation at a Small Biodiesel Production Facility…………D69
COUCH, James (Column Editor): Hazard Evaluation and Preventive Recommendations for an Unusual Confined Space Issue in an Opera Set Design…………D81
COUCH, James (Column Editor): Acceptance of a Semi-Custom Hearing Protector by Manufacturing Workers…………D125
COX-GANSER, Jean: Correcting Diacetyl Concentrations from Air Samples Collected with NIOSH Method 2557…………59
CRAWFORD, Shaun: Comparison of Toluene Adsorption Among Granular Activated Carbon and Different Types of Activated Carbon Fibers (ACFs)…………573
CUMMINGS, Kristin: Identification and Measurement of Diacetyl Substitutes in Dry Bakery Mix Production…………93
CURWIN, Brian: Exposure Characterization of Metal Oxide Nanoparticles in the Workplace…………580
D
DANIELL, W.: Evaluation and Comparison of Three Exposure Assessment Techniques…………310
DANYLUK, Quinn: Health Care Workers and Respiratory Protection: Is the User Seal Check a Surrogate for Respirator Fit-Testing?…………267
D'ARCY, James: A Strategy for Assessing Workplace Exposures to Nanomaterials…………673
DAVIES, H.: Evaluation and Comparison of Three Exposure Assessment Techniques…………310
DAVIS, Mary: Comparing Gravimetric and Real-Time Sampling of PM2.5 Concentrations Inside Truck Cabins…………662
DAVIS, Rickie: Acceptance of a Semi-Custom Hearing Protector by Manufacturing Workers…………D125
DAY, Gregory: Identification and Measurement of Diacetyl Substitutes in Dry Bakery Mix Production…………93
DEBIA, M.: Solvent Substitution: An Analysis of Comprehensive Hazard Screening Indices…………387
DEL POZZI, Andrew: Effects of Forearm vs. Leg Submersion in Work Tolerance Time in a Hot Environment While Wearing Fire Fighter Protective Clothing…………473
DELCLOS, George: Assessing Maintenance of Evaporative Cooling Systems in Legionellosis Outbreaks…………249
DELCLOS, George: Letter to the Editor…………D86
DEMANGE, Martine: Evaluation of Sampling Methods for Measuring Exposure to Volatile Inorganic Acids in Workplace Air. Part 1: Sampling Hydrochloric Acid (HCl) and Nitric Acid (HNO3) from a Test Gas Atmosphere…………492
DEMANGE, Martine: Evaluation of Sampling Methods for Measuring Exposure to Volatile Inorganic Acids in Workplace Air. Part 2: Sampling Capacity and Breakthrough Tests for Sodium Carbonate – Impregnated Filters…………642
DES TOMBE, Karen: Silica Exposure Assessment in a Mortality Study of Vermont Granite Workers…………71
DEYE, Gregory: Comparison of Air Sampling Methods for Aerosolized spores of B. anthracis Sterne…………179
DEYGOUT, Fran¸cois: Personal Exposure to PAHs in the Refinery During Truck Loading of Bitumen…………D97
DIAS DA CUNHA, Kenya: Uranium Oxide Solubility in Simulated Lung Fluids…………D51
DOROTTE, Michel: Evaluation of Sampling Methods for Measuring Exposure to Volatile Inorganic Acids in Workplace Air. Part 1: Sampling Hydrochloric Acid (HCl) and Nitric Acid (HNO3) from a Test Gas Atmosphere…………492
DUNGAN, Robert: Airborne Endotoxin from Indoor and Outdoor Environments: Effect of Sample Dilution on the Kinetic Limulus Amebocyte Lysate (LAL) Assay…………147
DUNN, Kevin: Personal PM2.5 Exposure Among Wildland Firefighters Working at Prescribed Forest Burns in Southeastern United States…………503
DWIVEDI, Alok: Comparison of Workplace Protection Factors for Different Biological Contaminants…………417
E
ECHEVERRIA, Diana: Inter-Rater Reliability of Assessed Prenatal Maternal Occupational Exposures to Solvents, Polycyclic Aromatic Hydrocarbons, and Heavy Metals…………718
EIDE, Mary: Correcting Diacetyl Concentrations from Air Samples Collected with NIOSH Method 2557…………59
EIMER, Benjamin: Evaluation of Nano- and Sub-micron Particle Penetration through Ten Nonwoven Fabrics using a Wind-Driven Approach…………13
EIMER, Benjamin: Evaluation Of The Filtration Performance Of Niosh-Approved N95 Filtering Facepiece Respirators By Photometric And Number-Based Test Methods…………23
EMERY, Robert: Assessing Maintenance of Evaporative Cooling Systems in Legionellosis Outbreaks…………249
EMERY, Robert: Letter to the Editor…………D86
ENDRUSICK, Thomas: Methods of Evaluating Protective Clothing Relative to Heat and Cold Stress: Thermal Manikin, Biomedical Modeling, and Human Testing…………588
ESMEN, Nurtan: A Novel Method for Reducing the Number of Agents to Be Studied in an Occupational Epidemiologic Study…………236
ESTILL, Cheryl: Comparison of Air Sampling Methods for Aerosolized spores of B. anthracis Sterne…………179
EVANS, Douglas: A Strategy for Assessing Workplace Exposures to Nanomaterials…………673
F
FAULKNER, Kimberly: Impact of Three Biological Decontamination Methods on Filtering Facepiece Respirator Fit, Odor, Comfort, and Donning Ease…………426
FENT, Kenneth: Field Comparison of Air Sampling Methods for Monomeric and Polymeric 1,6-Hexamethylene Diisocyanate…………161
FENT, Kenneth: Survey of Dermal Protection in Washington State Collision Repair Industry…………551
FENT, Kenneth: Development of a Sampling Patch to Measure Dermal Exposures to Monomeric and Polymeric 1,6-Hexamethylene Diisocyanate: A Pilot Study…………709
FERNANDES-FLACK, Jessica: Effectiveness of Hospital-Based Decontamination During a Simulated Mass Casualty Exposure…………D131
FIEDLER, N.: Development of Solvent Exposure Index for Construction Painters…………375
FIGUEROA, Crescente: Hood Entry Coefficients of Compound Exhaust Hoods…………740
FINKELSTEIN, Murray: Silica Exposure Assessment in a Mortality Study of Vermont Granite Workers…………71
FINLEY, B.: Characterization of Formaldehyde Exposure Resulting from the Use of Four Professional Hair Straightening Products…………686
FLACK, Sheila: Survey of Dermal Protection in Washington State Collision Repair Industry…………551
FLANDERS, W.: Short-Term Monitoring of Formaldehyde: Comparison of Two Direct-Reading Instruments to a Laboratory-Based Method…………357
FLURI, Alexandra: Implementation of a Quantitative Real-Time PCR Assay for the Detection of Mycobacterium immunogenum in Metalworking Fluids…………478
FOTO, Mark: Performance of Two Different Limulus Amebocyte Lysate Assays for the Quantitation of Fungal Glucan…………540
FRANKE, John: Laser-Generated Air Contaminants from Medical Laser Applications: A State-of-the-Science Review of Exposure Characterization, Health Effects, and Control…………447
FREELS, Sally: Evaluating the Association of Workplace Psychosocial Stressors with Occupational Injury, Illness, and Assault…………31
FU, Hua: Retrospective Occupational Exposure Assessment for Case-Control and Case-Series Epidemiology Studies Based in Shanghai China…………561
FULLER, Thomas: The Risks and Benefits of Chemical Fumigation in the Health Care Environment…………104
FUNG, David: Particle Release from Respirators, Part I: Determination of the Effect of Particle Size, Drop Height, and Load…………1
FUNG, David: Particle Release from Respirators, Part II: Determination of the Effect of Tension Applied in Simulation of Removal…………10
G
GAFFNEY, Shannon (Column Editor): Case Study: Ammonia Exposure While Pumping Diesel Exhaust Fluid…………D7
GAFFNEY, Shannon (Column Editor): Effects of Occupational Exposure on the Health of Workers in the Cricket Bat Manufacturing Industry in Kashmir, India…………D63
GAFFNEY, Shannon (Column Editor): Personal Exposure to PAHs in the Refinery During Truck Loading of Bitumen…………D97
GAFFNEY, Shannon: Characterization of Formaldehyde Exposure Resulting from the Use of Four Professional Hair Straightening Products…………686
GAFFNEY, Shannon (Column Editor): Effectiveness of Hospital-Based Decontamination During a Simulated Mass Casualty Exposure…………D131
GAGNON, Yvonne: NIOSH Manual of Analytical Methods 5th Edition – New Resources and Direction…………D59
GAINES, Linda: Survey of Dermal Protection in Washington State Collision Repair Industry…………551
GANSER, Gary: Correcting Diacetyl Concentrations from Air Samples Collected with NIOSH Method 2557…………59
GAO, Pengfei: Evaluation of Nano- and Sub-micron Particle Penetration through Ten Nonwoven Fabrics using a Wind-Driven Approach…………13
GAO, Pengfei: Performance Evaluation of 26 Combinations of Chemical Protective Clothing Materials and Chemicals After Repeated Exposures and Decontaminations…………625
GERACI, Charles: A Strategy for Assessing Workplace Exposures to Nanomaterials…………673
GERBER, Marco: Implementation of a Quantitative Real-Time PCR Assay for the Detection of Mycobacterium immunogenum in Metalworking Fluids…………478
GERIN, M.: Comparison of formaldehyde exposure levels in two multi-industry occupational exposure databanks using multimodel inference…………38
GERIN, M.: Solvent Substitution: An Analysis of Comprehensive Hazard Screening Indices…………387
GIBB, Herman: Biomarkers of Mercury Exposure in Two Eastern Ukraine Cities…………187
GIBBS, Graham: Silica Exposure Assessment in a Mortality Study of Vermont Granite Workers…………71
GIBBS, Shawn: Isolation of airborne oxacillin-resistant staphylococcus aureus from culturable air samples of urban homes…………80
GLYNN, M.: Characterization of Formaldehyde Exposure Resulting from the Use of Four Professional Hair Straightening Products…………686
GOTTESFELD, Perry: Review: Lead Exposure in Battery Manufacturing and Recycling in Developing Countries and Among Children in Nearby Communities…………520
GRAHAM, William: Silica Exposure Assessment in a Mortality Study of Vermont Granite Workers…………71
GREER, Laura: A Pilot Study of Workplace Dermal Exposures to Cypermethrin at a Chemical Manufacturing Plant…………600
GRESSEL, Michael: Short-Term Monitoring of Formaldehyde: Comparison of Two Direct-Reading Instruments to a Laboratory-Based Method…………357
GRIBOVICH, Andrey: Hazard Evaluation and Preventive Recommendations for an Unusual Confined Space Issue in an Opera Set Design…………D81
GRINSHPUN, Sergey: Comparison of Workplace Protection Factors for Different Biological Contaminants…………417
GROTE, Ardith: Identification and Measurement of Diacetyl Substitutes in Dry Bakery Mix Production…………93
GRÉVILLOT, Georges: A Comparison of the Wheeler-Jonas Model and the Linear Driving Force at Constant-Pattern Model for the Prediction of the Service Time of Activated Carbon Cartridges…………279
GUPTA, Bhupender: Evaluation of Nano- and Sub-micron Particle Penetration through Ten Nonwoven Fabrics using a Wind-Driven Approach…………13
GURIAN, Patrick: Isolation of airborne oxacillin-resistant staphylococcus aureus from culturable air samples of urban homes…………80
GUSBETH, Krista: Evaluation of Sampling Methods for Measuring Exposure to Volatile Inorganic Acids in Workplace Air. Part 1: Sampling Hydrochloric Acid (HCl) and Nitric Acid (HNO3) from a Test Gas Atmosphere…………492
H
HAINES, Ted: Ongoing Use of Conventional Devices and Safety Device Activation Rates in Hospitals in Ontario, Canada…………154
HALL, Daniel: Personal PM2.5 Exposure Among Wildland Firefighters Working at Prescribed Forest Burns in Southeastern United States…………503
HARBER, Philip: Anxiety During Respirator Use: Comparison of Two Respirator Types…………123
HARDCASTLE, Stephen: Ice Cooling Vest on Tolerance for Exercise Under Uncompensable Heat Stress…………484
HARDCASTLE, Stephen: The Influence of Activewear Worn Under Standard Work Coveralls on Whole-Body Heat Loss…………652
HAVER, Cary: Biomarkers of Mercury Exposure in Two Eastern Ukraine Cities…………187
HEIN, Misty: Comparison of Air Sampling Methods for Aerosolized spores of B. anthracis Sterne…………179
HEIN, Misty: Inter-Rater Reliability of Assessed Prenatal Maternal Occupational Exposures to Solvents, Polycyclic Aromatic Hydrocarbons, and Heavy Metals…………718
HENDRICKS, Warren: Correcting Diacetyl Concentrations from Air Samples Collected with NIOSH Method 2557…………59
HERRICK, Robert: Comparing Gravimetric and Real-Time Sampling of PM2.5 Concentrations Inside Truck Cabins…………662
HETHERINGTON, Yimei: Retrospective Occupational Exposure Assessment for Case-Control and Case-Series Epidemiology Studies Based in Shanghai China…………561
HEWETT, Paul: Exposure Data from Multi-Application, Multi-Industry Maintenance of Surfaces and Joints Sealed with Asbestos-Containing Gaskets and Packing…………194
HEWETT, Paul: Desktop Study of Occupational Exposure Judgments: Does Education and Experience Influence Accuracy?…………746
HINDS, William: Particle Release from Respirators, Part I: Determination of the Effect of Particle Size, Drop Height, and Load…………1
HINDS, William: Particle Release from Respirators, Part II: Determination of the Effect of Tension Applied in Simulation of Removal…………10
HINKAMP, David: Hazard Evaluation and Preventive Recommendations for an Unusual Confined Space Issue in an Opera Set Design…………D81
HIRST, Deborah: Short-Term Monitoring of Formaldehyde: Comparison of Two Direct-Reading Instruments to a Laboratory-Based Method…………357
HOATH, Steven: Acute Treatment with Kerosene Damages the Dermal Barrier and Alters the Distribution of Topically Applied Benzo(a)pyrene in Mice…………701
HOBBS, Gerald: Correcting Diacetyl Concentrations from Air Samples Collected with NIOSH Method 2557…………59
HODGES, Lisa: Comparison of Air Sampling Methods for Aerosolized spores of B. anthracis Sterne…………179
HOLCOMB, Mark: Measurement of Respirable Superabsorbent Polyacrylate (SAP) Dust by Ethanol Derivatization Using Gas Chromatography-Mass Spectrometry (GC-MS) Detection…………215
HOLM, S.: Potential Artifacts Associated with Historical Preparation of Joint Compound Samples and Reported Airborne Asbestos Concentrations…………271
HON, Chun-Yip: Health Care Workers and Respiratory Protection: Is the User Seal Check a Surrogate for Respirator Fit-Testing?…………267
HONG, Sung-Jong: Clinical Characteristics of Acoustic Trauma Caused by Gunshot Noise in Mass Rifle Drills Without Ear Protection…………618
HOOD, Joyce: Effectiveness of Hospital-Based Decontamination During a Simulated Mass Casualty Exposure…………D131
HOWE, Alan: Evaluation of Sampling Methods for Measuring Exposure to Volatile Inorganic Acids in Workplace Air. Part 1: Sampling Hydrochloric Acid (HCl) and Nitric Acid (HNO3) from a Test Gas Atmosphere…………492
HOYT, Reed: Methods of Evaluating Protective Clothing Relative to Heat and Cold Stress: Thermal Manikin, Biomedical Modeling, and Human Testing…………588
HSIAO, Ta-Chih: Evaluation of Nano- and Sub-micron Particle Penetration through Ten Nonwoven Fabrics using a Wind-Driven Approach…………13
J
JAISWAL, Y.: Effects of Occupational Exposure on the Health of Workers in the Cricket Bat Manufacturing Industry in Kashmir, India…………D63
JANSSEN, Bob: Health Care Workers and Respiratory Protection: Is the User Seal Check a Surrogate for Respirator Fit-Testing?…………267
JANSSEN, Larry: Letter to the Editor…………D15
JAQUES, Peter: Evaluation of Nano- and Sub-micron Particle Penetration through Ten Nonwoven Fabrics using a Wind-Driven Approach…………13
JAYJOCK, Michael: The Daubert Standard as Applied to Exposure Assessment Modeling Using the Two-Zone (NF/FF) Model Estimation of Indoor Air Breathing Zone Concentration as an Example…………D114
JIANG, Hongyu: Comparing Gravimetric and Real-Time Sampling of PM2.5 Concentrations Inside Truck Cabins…………662
JOHNSON, Peter: Vehicle Design Influences Whole Body Vibration Exposures: Effect of the Location of the Front Axle Relative to the Cab…………364
JOHNSON, Rachel: Isolation of airborne oxacillin-resistant staphylococcus aureus from culturable air samples of urban homes…………80
JONES, Gordon: Comparison of Workplace Protection Factors for Different Biological Contaminants…………417
JONES, Rachel: Factors Influencing Dust Exposure: Finishing Activities in Drywall Construction…………324
JONES, Rachel: Development and Evaluation of a Semi-Empirical Two-Zone Dust Exposure Model for a Dusty Construction Trade…………337
JONES, Rachel: Comparing Two-Zone Models of Dust Exposure…………513
JONES, Susan: Comparison of Workplace Protection Factors for Different Biological Contaminants…………417
JOVICIC, Dubravka: Occupational Exposure in Nuclear Medicine…………D101
JURGENSON, Vera: Biomarkers of Mercury Exposure in Two Eastern Ukraine Cities…………187
K
KATICA, Charles: Effects of Forearm vs. Leg Submersion in Work Tolerance Time in a Hot Environment While Wearing Fire Fighter Protective Clothing…………473
KENNEDY, Nola: Particle Release from Respirators, Part I: Determination of the Effect of Particle Size, Drop Height, and Load…………1
KENNEDY, Nola: Particle Release from Respirators, Part II: Determination of the Effect of Tension Applied in Simulation of Removal…………10
KENNY, Glen: Ice Cooling Vest on Tolerance for Exercise Under Uncompensable Heat Stress…………484
KENNY, Glen: The Influence of Activewear Worn Under Standard Work Coveralls on Whole-Body Heat Loss…………652
KEY-SCHWARTZ, Rosa: NIOSH Manual of Analytical Methods 5th Edition – New Resources and Direction…………D59
KIM, Jung-Hyun: Effects of Liquid Cooling Garments on Recovery and Performance Time in Individuals Performing Strenuous Work Wearing a Firefighter Ensemble…………409
KOFFORD, Shalece: Variability and Specificity Associated with Environmental Methamphetamine Sampling and Analysis…………636
KOLKER, Allan: Biomarkers of Mercury Exposure in Two Eastern Ukraine Cities…………187
KOPSTEIN, Melvyn: Estimating Airborne Benzene Exposures from Air Monitoring Data for Mineral Spirits…………300
KOPSTEIN, Melvyn: Letter to the Editor and Author's Reply…………D139
KOURNIKAKIS, Bill: Anthrax Letters in an Open Office Environment: Effects of Selected CDC Response Guidelines on Personal Exposure and Building Contamination…………113
KOVALCHIK, Stephanie: Particle Release from Respirators, Part II: Determination of the Effect of Tension Applied in Simulation of Removal…………10
KOZLOV, Kostj: Biomarkers of Mercury Exposure in Two Eastern Ukraine Cities…………187
KREISS, Kathleen: Identification and Measurement of Diacetyl Substitutes in Dry Bakery Mix Production…………93
KULLMAN, Greg: Correcting Diacetyl Concentrations from Air Samples Collected with NIOSH Method 2557…………59
KULLMAN, Greg: Identification and Measurement of Diacetyl Substitutes in Dry Bakery Mix Production…………93
L
LADOW, Kathy: Acute Treatment with Kerosene Damages the Dermal Barrier and Alters the Distribution of Topically Applied Benzo(a)pyrene in Mice…………701
LACEY, Steven: Laser-Generated Air Contaminants from Medical Laser Applications: A State-of-the-Science Review of Exposure Characterization, Health Effects, and Control…………447
LACEY, Steven: Hazard Evaluation and Preventive Recommendations for an Unusual Confined Space Issue in an Opera Set Design…………D81
LAN, Christopher: Ice Cooling Vest on Tolerance for Exercise Under Uncompensable Heat Stress…………484
LANDA, Edward: Biomarkers of Mercury Exposure in Two Eastern Ukraine Cities…………187
LARRANAGA, Michael (Column Editor): Uranium Oxide Solubility in Simulated Lung Fluids…………D51
LARRANAGA, Michael (Column Editor): Occupational Exposure in Nuclear Medicine…………D101
LARRANAGA, Michael: Effectiveness of Hospital-Based Decontamination During a Simulated Mass Casualty Exposure…………D131
LARSEN, Lloyd: Comparison of Air Sampling Methods for Aerosolized spores of B. anthracis Sterne…………179
LAVOIE, Jacques: Validation of the Criteria for Initiating the Cleaning of Heating, Ventilation, and Air-Conditioning (HVAC) Ductwork Under Real Conditions…………467
LAVOUÉ, J.: Comparison of formaldehyde exposure levels in two multi-industry occupational exposure databanks using multimodel inference…………38
LAVOUÉ, Jérôme: Validation of the Criteria for Initiating the Cleaning of Heating, Ventilation, and Air-Conditioning (HVAC) Ductwork Under Real Conditions…………467
LAW, Brandon: Safety and Chemical Exposure Evaluation at a Small Biodiesel Production Facility…………D68
LAWSON, Christina: Inter-Rater Reliability of Assessed Prenatal Maternal Occupational Exposures to Solvents, Polycyclic Aromatic Hydrocarbons, and Heavy Metals…………718
LEBOUF, Ryan: Identification and Measurement of Diacetyl Substitutes in Dry Bakery Mix Production…………93
LEE, Edgar: Unknown Exposures: Gaps in Basic Characterization Addressed with Person-Portable Gas Chromatography-Mass Spectrometry Instrumentation…………129
LEE, Won-Sang: Clinical Characteristics of Acoustic Trauma Caused by Gunshot Noise in Mass Rifle Drills Without Ear Protection…………618
LEMMO, John: Measurement of Respirable Superabsorbent Polyacrylate (SAP) Dust by Ethanol Derivatization Using Gas Chromatography-Mass Spectrometry (GC-MS) Detection…………215
LEVY, Johnathan: Comparing Gravimetric and Real-Time Sampling of PM2.5 Concentrations Inside Truck Cabins…………662
LI, Yuan: Anxiety During Respirator Use: Comparison of Two Respirator Types…………123
LIANG, Youxin: Retrospective Occupational Exposure Assessment for Case-Control and Case-Series Epidemiology Studies Based in Shanghai China…………561
LIECKFIELD, Robert: Measurement of Respirable Superabsorbent Polyacrylate (SAP) Dust by Ethanol Derivatization Using Gas Chromatography-Mass Spectrometry (GC-MS) Detection…………215
LIM, Hyun: Effect of Transfer, Lifting, and Repositioning (TLR) Injury Prevention Program on Musculoskeletal Injury Among Direct Care Workers…………226
LIMA, C.: Uranium Oxide Solubility in Simulated Lung Fluids…………D51
LIMA, R.: Uranium Oxide Solubility in Simulated Lung Fluids…………D51
LIPPERT, Julia: Laser-Generated Air Contaminants from Medical Laser Applications: A State-of-the-Science Review of Exposure Characterization, Health Effects, and Control…………447
LOGAN, Perry: Desktop Study of Occupational Exposure Judgments: Does Education and Experience Influence Accuracy?…………746
LOMBARDI, Bernard: Personal Exposure to PAHs in the Refinery During Truck Loading of Bitumen…………D97
LOPEZ, Ramon: Laser-Generated Air Contaminants from Medical Laser Applications: A State-of-the-Science Review of Exposure Characterization, Health Effects, and Control…………447
LUNGU, Claudiu: Comparison of Toluene Adsorption Among Granular Activated Carbon and Different Types of Activated Carbon Fibers (ACFs)…………573
LUNSFORD, Alan: NIOSH Manual of Analytical Methods 5th Edition – New Resources and Direction…………D59
LUSE, Nicole: Acute Treatment with Kerosene Damages the Dermal Barrier and Alters the Distribution of Topically Applied Benzo(a)pyrene in Mice…………701
LYNCH, Stephanie: Laboratory Study to Assess Causative Factors Affecting Temporal Changes in Filtering Facepiece Respirator Fit: Part I – Pilot Study…………729
LYNN, Aaron: Ice Cooling Vest on Tolerance for Exercise Under Uncompensable Heat Stress…………484
M
MACOMBER, Margaret: Measurement of Respirable Superabsorbent Polyacrylate (SAP) Dust by Ethanol Derivatization Using Gas Chromatography-Mass Spectrometry (GC-MS) Detection…………215
MARCHAND, Geneviève: Validation of the Criteria for Initiating the Cleaning of Heating, Ventilation, and Air-Conditioning (HVAC) Ductwork Under Real Conditions…………467
MARINKOVIC, Olivera: Occupational Exposure in Nuclear Medicine…………D101
MARSTEAU, Stéphanie: A Comparison of the Wheeler-Jonas Model and the Linear Driving Force at Constant-Pattern Model for the Prediction of the Service Time of Activated Carbon Cartridges…………279
MARTINEZ, Kenneth: Anthrax Letters in an Open Office Environment: Effects of Selected CDC Response Guidelines on Personal Exposure and Building Contamination…………113
MARTYNY, John: Variability and Specificity Associated with Environmental Methamphetamine Sampling and Analysis…………636
MAYNARD, Andrew: A Strategy for Assessing Workplace Exposures to Nanomaterials…………673
MCCLEERY, Robert: Anthrax Letters in an Open Office Environment: Effects of Selected CDC Response Guidelines on Personal Exposure and Building Contamination…………113
MCCORMACK, Paul: Measurement of Respirable Superabsorbent Polyacrylate (SAP) Dust by Ethanol Derivatization Using Gas Chromatography-Mass Spectrometry (GC-MS) Detection…………215
MCKAY, Roy: Comparison of Workplace Protection Factors for Different Biological Contaminants…………417
MENSCH, Amy: Characterizing Inward Leakage in a Pressure Demand, Self Contained Breathing Apparatus…………437
METCALFE, Judy: Effect of Transfer, Lifting, and Repositioning (TLR) Injury Prevention Program on Musculoskeletal Injury Among Direct Care Workers…………226
METHNER, Mark: A Strategy for Assessing Workplace Exposures to Nanomaterials…………673
MILLER, Adam: Evaluation of Nano- and Sub-micron Particle Penetration through Ten Nonwoven Fabrics using a Wind-Driven Approach…………13
MILLER, Adam: Evaluation Of The Filtration Performance Of Niosh-Approved N95 Filtering Facepiece Respirators By Photometric And Number-Based Test Methods…………23
MILLER, J.: Performance of Two Different Limulus Amebocyte Lysate Assays for the Quantitation of Fungal Glucan…………540
MOEN, Bente: Excessive Exposure to Dust Among Cleaners in the Ethiopian Cement Industry…………544
MOON, In Seok: Clinical Characteristics of Acoustic Trauma Caused by Gunshot Noise in Mass Rifle Drills Without Ear Protection…………618
MORITZ, Andreas: Evaluation of Sampling Methods for Measuring Exposure to Volatile Inorganic Acids in Workplace Air. Part 1: Sampling Hydrochloric Acid (HCl) and Nitric Acid (HNO3) from a Test Gas Atmosphere…………492
MULHAUSEN, John: Desktop Study of Occupational Exposure Judgments: Does Education and Experience Influence Accuracy?…………746
MURPHY, Colin: Hazard Evaluation and Preventive Recommendations for an Unusual Confined Space Issue in an Opera Set Design…………D81
MURPHY, William: Acceptance of a Semi-Custom Hearing Protector by Manufacturing Workers…………D125
MUSGROVE, Darren: Evaluation of Sampling Methods for Measuring Exposure to Volatile Inorganic Acids in Workplace Air. Part 1: Sampling Hydrochloric Acid (HCl) and Nitric Acid (HNO3) from a Test Gas Atmosphere…………492
N
NAEHER, Luke: Personal PM2.5 Exposure Among Wildland Firefighters Working at Prescribed Forest Burns in Southeastern United States…………503
NEIER, N.: Characterization of Formaldehyde Exposure Resulting from the Use of Four Professional Hair Straightening Products…………686
NEITZEL, Richard: Evaluation and Comparison of Three Exposure Assessment Techniques…………310
NEUDORF, Mike: Health Care Workers and Respiratory Protection: Is the User Seal Check a Surrogate for Respirator Fit-Testing?…………267
NOVAK, Debra: Impact of Three Biological Decontamination Methods on Filtering Facepiece Respirator Fit, Odor, Comfort, and Donning Ease…………426
NWANKWO, C.: Development of Solvent Exposure Index for Construction Painters…………375
NYLANDER-FRENCH, Leena: Field Comparison of Air Sampling Methods for Monomeric and Polymeric 1,6-Hexamethylene Diisocyanate…………161
NYLANDER-FRENCH, Leena: Survey of Dermal Protection in Washington State Collision Repair Industry…………551
NYLANDER-FRENCH, Leena: Development of a Sampling Patch to Measure Dermal Exposures to Monomeric and Polymeric 1,6-Hexamethylene Diisocyanate: A Pilot Study…………709
O
OLESON, Jacob: Airborne Nanoparticle Concentrations in the Manufacturing of Polytetrafluoroethylene (PTFE) Apparel…………139
OSTRAAT, Michele: A Strategy for Assessing Workplace Exposures to Nanomaterials…………673
OURY, Véronique: Evaluation of Sampling Methods for Measuring Exposure to Volatile Inorganic Acids in Workplace Air. Part 1: Sampling Hydrochloric Acid (HCl) and Nitric Acid (HNO3) from a Test Gas Atmosphere…………492
OURY, Véronique: Evaluation of Sampling Methods for Measuring Exposure to Volatile Inorganic Acids in Workplace Air. Part 2: Sampling Capacity and Breakthrough Tests for Sodium Carbonate – Impregnated Filters…………642
O'BRIEN, Catherine: Methods of Evaluating Protective Clothing Relative to Heat and Cold Stress: Thermal Manikin, Biomedical Modeling, and Human Testing…………588
O'CONNOR, Paula: NIOSH Manual of Analytical Methods 5th Edition – New Resources and Direction…………D59
O'SHAUGHNESSY, Patrick: Case Study: Ammonia Exposure While Pumping Diesel Exhaust Fluid…………D7
O'SHAUGHNESSY, Patrick: A Strategy for Assessing Workplace Exposures to Nanomaterials…………673
P
PAJIC, Jelena: Occupational Exposure in Nuclear Medicine…………D101
PALMIERO, Andrew: Impact of Three Biological Decontamination Methods on Filtering Facepiece Respirator Fit, Odor, Comfort, and Donning Ease…………426
PALMIERO, Andy: Laboratory Study to Assess Causative Factors Affecting Temporal Changes in Filtering Facepiece Respirator Fit: Part I – Pilot Study…………729
PARK, Hyun Jin: Clinical Characteristics of Acoustic Trauma Caused by Gunshot Noise in Mass Rifle Drills Without Ear Protection…………618
PARK, Sang-Yong: Clinical Characteristics of Acoustic Trauma Caused by Gunshot Noise in Mass Rifle Drills Without Ear Protection…………618
PARKER, David: Exposure Assessment in Auto Collision Repair Shops…………401
PARKER, David: Letters to the Editor…………D73
PAUSTENBACH, Dennis: Letters to the Editor…………D139
PAVON, I.: Assessment of Noise Exposure During Commuting in the Madrid Subway…………533
PEARCE, Terri: Integrating Direct-Reading Exposure Assessment Methods into Industrial Hygiene Practice…………D31
PEARCE, Terri: Safety and Chemical Exposure Evaluation at a Small Biodiesel Production Facility…………D68
PENDERGRASS, Stephanie: Identification and Measurement of Diacetyl Substitutes in Dry Bakery Mix Production…………93
PEREZ, Hernando: Isolation of airborne oxacillin-resistant staphylococcus aureus from culturable air samples of urban homes…………80
PETERS, Thomas: Characterization and Control of Airborne Particles Emitted During Production of Epoxy / Carbon Nanotube Nanocomposites…………86
PETERS, Thomas: Airborne Nanoparticle Concentrations in the Manufacturing of Polytetrafluoroethylene (PTFE) Apparel…………139
PHALEN, Robert: Integrity of Disposable Nitrile Exam Gloves Exposed to Simulated Movement…………289
PIACITELLI, Chris: Correcting Diacetyl Concentrations from Air Samples Collected with NIOSH Method 2557…………59
PIAMONTE, Matthew: Ice Cooling Vest on Tolerance for Exercise Under Uncompensable Heat Stress…………484
PICKENS, William: Acute Treatment with Kerosene Damages the Dermal Barrier and Alters the Distribution of Topically Applied Benzo(a)pyrene in Mice…………701
PICKUP, Roger: Implementation of a Quantitative Real-Time PCR Assay for the Detection of Mycobacterium immunogenum in Metalworking Fluids…………478
PIERCE, J.: Characterization of Formaldehyde Exposure Resulting from the Use of Four Professional Hair Straightening Products…………686
PIERCE, Jennifer: A Novel Method for Reducing the Number of Agents to Be Studied in an Occupational Epidemiologic Study…………236
PIERCE, Jennifer: Laser-Generated Air Contaminants from Medical Laser Applications: A State-of-the-Science Review of Exposure Characterization, Health Effects, and Control…………447
POKHREL, Amod: Review: Lead Exposure in Battery Manufacturing and Recycling in Developing Countries and Among Children in Nearby Communities…………520
POWELL, Jeffrey: Physiological Responses to Wearing a Prototype Firefighter Ensemble Compared with a Standard Ensemble…………49
POWELL, Jeffrey: Impact of Three Biological Decontamination Methods on Filtering Facepiece Respirator Fit, Odor, Comfort, and Donning Ease…………426
PRITCHETT, Kelly: Effects of Forearm vs. Leg Submersion in Work Tolerance Time in a Hot Environment While Wearing Fire Fighter Protective Clothing…………473
PRITCHETT, Robert: Effects of Forearm vs. Leg Submersion in Work Tolerance Time in a Hot Environment While Wearing Fire Fighter Protective Clothing…………473
PROKIC, Vedrana: Occupational Exposure in Nuclear Medicine…………D101
Q
QIAN, H.: Development of Solvent Exposure Index for Construction Painters…………375
R
RAKIC, Boban: Occupational Exposure in Nuclear Medicine…………D101
RAMACHANDRAN, Gurumurthy: A Strategy for Assessing Workplace Exposures to Nanomaterials…………673
RAMACHANDRAN, Gurumurthy: Desktop Study of Occupational Exposure Judgments: Does Education and Experience Influence Accuracy?…………746
RAMOS, Gabriel: Anthrax Letters in an Open Office Environment: Effects of Selected CDC Response Guidelines on Personal Exposure and Building Contamination…………113
RANGEL, Kelly: Assessing Maintenance of Evaporative Cooling Systems in Legionellosis Outbreaks…………249
RANGEL, Kelly: Letter to the Editor…………D86
RECUERO, M.: Assessment of Noise Exposure During Commuting in the Madrid Subway…………533
REEB-WHITAKER, Carolyn: Field Comparison of Air Sampling Methods for Monomeric and Polymeric 1,6-Hexamethylene Diisocyanate…………161
REEB-WHITAKER, Carolyn: Survey of Dermal Protection in Washington State Collision Repair Industry…………551
REEFHUIS, Jennita: Inter-Rater Reliability of Assessed Prenatal Maternal Occupational Exposures to Solvents, Polycyclic Aromatic Hydrocarbons, and Heavy Metals…………718
RENGASAMY, Samy: Evaluation Of The Filtration Performance Of Niosh-Approved N95 Filtering Facepiece Respirators By Photometric And Number-Based Test Methods…………23
REPONEN, Tiina: Comparison of Workplace Protection Factors for Different Biological Contaminants…………417
RHODES, Glenn: Implementation of a Quantitative Real-Time PCR Assay for the Detection of Mycobacterium immunogenum in Metalworking Fluids…………478
RICKABAUGH, Keith: A Strategy for Assessing Workplace Exposures to Nanomaterials…………673
ROBERGE, Raymond: Physiological Responses to Wearing a Prototype Firefighter Ensemble Compared with a Standard Ensemble…………49
ROBERGE, Raymond: Effects of Liquid Cooling Garments on Recovery and Performance Time in Individuals Performing Strenuous Work Wearing a Firefighter Ensemble…………409
ROBERGE, Raymond: Laboratory Study to Assess Causative Factors Affecting Temporal Changes in Filtering Facepiece Respirator Fit: Part I – Pilot Study…………729
ROBERTSON, Shirley: A Pilot Study of Workplace Dermal Exposures to Cypermethrin at a Chemical Manufacturing Plant…………600
ROCHELEAU, Carissa: Inter-Rater Reliability of Assessed Prenatal Maternal Occupational Exposures to Solvents, Polycyclic Aromatic Hydrocarbons, and Heavy Metals…………718
ROE, Marc: Unknown Exposures: Gaps in Basic Characterization Addressed with Person-Portable Gas Chromatography-Mass Spectrometry Instrumentation…………129
ROSE, Laura: Comparison of Air Sampling Methods for Aerosolized spores of B. anthracis Sterne…………179
ROSPENDA, Kathleen: Evaluating the Association of Workplace Psychosocial Stressors with Occupational Injury, Illness, and Assault…………31
ROUSSET, Davy: Evaluation of Sampling Methods for Measuring Exposure to Volatile Inorganic Acids in Workplace Air. Part 1: Sampling Hydrochloric Acid (HCl) and Nitric Acid (HNO3) from a Test Gas Atmosphere…………492
ROUSSET, Davy: Evaluation of Sampling Methods for Measuring Exposure to Volatile Inorganic Acids in Workplace Air. Part 2: Sampling Capacity and Breakthrough Tests for Sodium Carbonate – Impregnated Filters…………642
RUEFENACHT, Andrea: Implementation of a Quantitative Real-Time PCR Assay for the Detection of Mycobacterium immunogenum in Metalworking Fluids…………478
RYNELL, Patrik: Vehicle Design Influences Whole Body Vibration Exposures: Effect of the Location of the Front Axle Relative to the Cab…………364
S
SADOWSKI, Charles: Unknown Exposures: Gaps in Basic Characterization Addressed with Person-Portable Gas Chromatography-Mass Spectrometry Instrumentation…………129
SAITO, Rena: Correcting Diacetyl Concentrations from Air Samples Collected with NIOSH Method 2557…………59
SAMMONS, Deborah: A Pilot Study of Workplace Dermal Exposures to Cypermethrin at a Chemical Manufacturing Plant…………600
SANTIAGO, Silverio: Anxiety During Respirator Use: Comparison of Two Respirator Types…………123
SANTOS, M.: Uranium Oxide Solubility in Simulated Lung Fluids…………D51
SAWKA, Michael: Methods of Evaluating Protective Clothing Relative to Heat and Cold Stress: Thermal Manikin, Biomedical Modeling, and Human Testing…………588
SCHISSLER, Andrew: Ice Cooling Vest on Tolerance for Exercise Under Uncompensable Heat Stress…………484
SCHLECHT, Paul: NIOSH Manual of Analytical Methods 5th Edition – New Resources and Direction…………D59
SCHNATTER, A.: Retrospective Occupational Exposure Assessment for Case-Control and Case-Series Epidemiology Studies Based in Shanghai China…………561
SCHUMANN, Brenda: Acute Treatment with Kerosene Damages the Dermal Barrier and Alters the Distribution of Topically Applied Benzo(a)pyrene in Mice…………701
SEIXAS, N.: Evaluation and Comparison of Three Exposure Assessment Techniques…………310
SERRANO, Kate: Variability and Specificity Associated with Environmental Methamphetamine Sampling and Analysis…………636
SHADOMY, Sean: Anthrax Letters in an Open Office Environment: Effects of Selected CDC Response Guidelines on Personal Exposure and Building Contamination…………113
SHAFFER, Ronald: Evaluation of Nano- and Sub-micron Particle Penetration through Ten Nonwoven Fabrics using a Wind-Driven Approach…………13
SHAFFER, Ronald: Physiological Responses to Wearing a Prototype Firefighter Ensemble Compared with a Standard Ensemble…………49
SHAFFER, Ronald: Impact of Three Biological Decontamination Methods on Filtering Facepiece Respirator Fit, Odor, Comfort, and Donning Ease…………426
SHAH, Syed: Effect of Transfer, Lifting, and Repositioning (TLR) Injury Prevention Program on Musculoskeletal Injury Among Direct Care Workers…………226
SHAW, Peter: Acceptance of a Semi-Custom Hearing Protector by Manufacturing Workers…………D125
SHEEHAN, P.: Potential Artifacts Associated with Historical Preparation of Joint Compound Samples and Reported Airborne Asbestos Concentrations…………271
SHEEN, Shaw-Ching: Effect of Exit Spacing in a Multiple-Jet Nozzle on Noise Levels at Audible Frequencies…………349
SHEPHERD, Angie: Evaluation of Nano- and Sub-micron Particle Penetration through Ten Nonwoven Fabrics using a Wind-Driven Approach…………13
SHEPHERD, Angie: Physiological Responses to Wearing a Prototype Firefighter Ensemble Compared with a Standard Ensemble…………49
SHEPPARD, L.: Evaluation and Comparison of Three Exposure Assessment Techniques…………310
SHUKLA, Rakesh: Comparison of Workplace Protection Factors for Different Biological Contaminants…………417
SIEGEL, Paul: Safety and Chemical Exposure Evaluation at a Small Biodiesel Production Facility…………D68
SIMMONS, Catherine: Exposure Data from Multi-Application, Multi-Industry Maintenance of Surfaces and Joints Sealed with Asbestos-Containing Gaskets and Packing…………194
SIMMONS, Catherine: Factors Influencing Dust Exposure: Finishing Activities in Drywall Construction…………324
SIMMONS, Catherine: Development and Evaluation of a Semi-Empirical Two-Zone Dust Exposure Model for a Dusty Construction Trade…………337
SIMMONS, Catherine: Comparing Two-Zone Models of Dust Exposure…………513
SIMMONS, Michael: Correcting Diacetyl Concentrations from Air Samples Collected with NIOSH Method 2557…………59
SINGH, Umesh: Comparison of Workplace Protection Factors for Different Biological Contaminants…………417
SMITH, Jerome: A Pilot Study of Workplace Dermal Exposures to Cypermethrin at a Chemical Manufacturing Plant…………600
SMITH, Philip: Unknown Exposures: Gaps in Basic Characterization Addressed with Person-Portable Gas Chromatography-Mass Spectrometry Instrumentation…………129
SMITH, Thomas: Comparing Gravimetric and Real-Time Sampling of PM2.5 Concentrations Inside Truck Cabins…………662
SNAWDER, John: A Pilot Study of Workplace Dermal Exposures to Cypermethrin at a Chemical Manufacturing Plant…………600
SNYDER, Jay: Estimating Reusability of Organic Air-Purifying Respirator Cartridges…………609
SOKAS, Rosemary: Evaluating the Association of Workplace Psychosocial Stressors with Occupational Injury, Illness, and Assault…………31
SPICER, L.: Characterization of Formaldehyde Exposure Resulting from the Use of Four Professional Hair Straightening Products…………686
STAPLETON, Jill: Ice Cooling Vest on Tolerance for Exercise Under Uncompensable Heat Stress…………484
STAPLETON, Jill: The Influence of Activewear Worn Under Standard Work Coveralls on Whole-Body Heat Loss…………652
STEIN, Elliot: Letter to the Editor…………D86
STEIN, Lauren: Performance Evaluation of 26 Combinations of Chemical Protective Clothing Materials and Chemicals After Repeated Exposures and Decontaminations…………625
STEVENSON, Edward: A Strategy for Assessing Workplace Exposures to Nanomaterials…………673
STEWART, Patricia: Inter-Rater Reliability of Assessed Prenatal Maternal Occupational Exposures to Solvents, Polycyclic Aromatic Hydrocarbons, and Heavy Metals…………718
STOCK, Allison: Personal PM2.5 Exposure Among Wildland Firefighters Working at Prescribed Forest Burns in Southeastern United States…………503
STOVER, Derry: Case Study: Occupational Exposures to Antineoplastic Drugs in an Oncology-Hematology Department…………D1
STRINGER, Bernadette: Ongoing Use of Conventional Devices and Safety Device Activation Rates in Hospitals in Ontario, Canada…………154
SWANEPOEL, DeWet: Validity of Diagnostic Computer-Based Air and Forehead Bone Conduction Audiometry…………210
SWANSON, Naomi: Evaluating the Association of Workplace Psychosocial Stressors with Occupational Injury, Illness, and Assault…………31
SYLVAIN, David: Deepwater Horizon Response Workers Exposure Assessment at the Source: MC252 Well No. 1…………D43
SYMANSKI, Elaine: Assessing Maintenance of Evaporative Cooling Systems in Legionellosis Outbreaks…………249
SYMANSKI, Elaine: Letter to the Editor…………D86
T
TABACCHI, Mattia: Assessment of Noise Exposure During Commuting in the Madrid Subway…………533
TALASKA, Glenn: Acute Treatment with Kerosene Damages the Dermal Barrier and Alters the Distribution of Topically Applied Benzo(a)pyrene in Mice…………701
TAYLOR, Jennifer: Isolation of airborne oxacillin-resistant staphylococcus aureus from culturable air samples of urban homes…………80
TAYLOR, Michael: The Daubert Standard as Applied to Exposure Assessment Modeling Using the Two-Zone (NF/FF) Model Estimation of Indoor Air Breathing Zone Concentration as an Example…………D114
THOMASEN, Jennifer: Field Comparison of Air Sampling Methods for Monomeric and Polymeric 1,6-Hexamethylene Diisocyanate…………161
THOMASEN, Jennifer: Survey of Dermal Protection in Washington State Collision Repair Industry…………551
THOMASEN, Jennifer: Development of a Sampling Patch to Measure Dermal Exposures to Monomeric and Polymeric 1,6-Hexamethylene Diisocyanate: A Pilot Study…………709
TOMASOVIC, Beth: Performance Evaluation of 26 Combinations of Chemical Protective Clothing Materials and Chemicals After Repeated Exposures and Decontaminations…………625
TRUCHON, Ginette: Letters to the Editor…………D37
U
UNICE, Kenneth: Letters to the Editor…………D139
V
VACEK, Pamela: Silica Exposure Assessment in a Mortality Study of Vermont Granite Workers…………71
VALLIÉRES, Cécile: A Comparison of the Wheeler-Jonas Model and the Linear Driving Force at Constant-Pattern Model for the Prediction of the Service Time of Activated Carbon Cartridges…………279
VAN DYKE, Mike: Variability and Specificity Associated with Environmental Methamphetamine Sampling and Analysis…………636
VERMA, Dave: Silica Exposure Assessment in a Mortality Study of Vermont Granite Workers…………71
VERNEZ, David: Letters to the Editor…………D37
VINCENT, R.: Comparison of formaldehyde exposure levels in two multi-industry occupational exposure databanks using multimodel inference…………38
VISCUSI, Dennis: Impact of Three Biological Decontamination Methods on Filtering Facepiece Respirator Fit, Odor, Comfort, and Donning Ease…………426
VOSBURGH, Donna: Airborne Nanoparticle Concentrations in the Manufacturing of Polytetrafluoroethylene (PTFE) Apparel…………139
W
WANG, Sheng-Wei: Development of Solvent Exposure Index for Construction Painters…………375
WANI, Khursheed: Effects of Occupational Exposure on the Health of Workers in the Cricket Bat Manufacturing Industry in Kashmir, India…………D63
WARSHAWSKY, Dave: Acute Treatment with Kerosene Damages the Dermal Barrier and Alters the Distribution of Topically Applied Benzo(a)pyrene in Mice…………701
WATERS, Martha: Inter-Rater Reliability of Assessed Prenatal Maternal Occupational Exposures to Solvents, Polycyclic Aromatic Hydrocarbons, and Heavy Metals…………718
WEISEL, C.: Development of Solvent Exposure Index for Construction Painters…………375
WHITE, Kenneth L.: Letter to the Editor…………D25
WHITTAKER, Stephen: Field Comparison of Air Sampling Methods for Monomeric and Polymeric 1,6-Hexamethylene Diisocyanate…………161
WHITTAKER, Stephen: Survey of Dermal Protection in Washington State Collision Repair Industry…………551
WILLIAMS, Rita: The Action Level…………D27
WILLIAMS, Rita: The Action Level…………D39
WILLIAMS, W.: Physiological Responses to Wearing a Prototype Firefighter Ensemble Compared with a Standard Ensemble…………49
WILLIAMS, W.: Effects of Liquid Cooling Garments on Recovery and Performance Time in Individuals Performing Strenuous Work Wearing a Firefighter Ensemble…………409
WONG, Otto: Retrospective Occupational Exposure Assessment for Case-Control and Case-Series Epidemiology Studies Based in Shanghai China…………561
WONG, Weng Kee: Integrity of Disposable Nitrile Exam Gloves Exposed to Simulated Movement…………289
WOOD, Gerry: Estimating Reusability of Organic Air-Purifying Respirator Cartridges…………609
WU, Samantha: Anxiety During Respirator Use: Comparison of Two Respirator Types…………123
X
XU, Hanna: Biomarkers of Mercury Exposure in Two Eastern Ukraine Cities…………187
XU, Xiaojiang: Methods of Evaluating Protective Clothing Relative to Heat and Cold Stress: Thermal Manikin, Biomedical Modeling, and Human Testing…………588
Y
YANG, Hoon-Shik: Clinical Characteristics of Acoustic Trauma Caused by Gunshot Noise in Mass Rifle Drills Without Ear Protection…………618
YANG, Mengshi: Evaluation of Nano- and Sub-micron Particle Penetration through Ten Nonwoven Fabrics using a Wind-Driven Approach…………13
YASSI, Annalee: Health Care Workers and Respiratory Protection: Is the User Seal Check a Surrogate for Respirator Fit-Testing?…………267
YOST, Michael: Survey of Dermal Protection in Washington State Collision Repair Industry…………551
YUN, David: Anxiety During Respirator Use: Comparison of Two Respirator Types…………123
Z
ZELEKE, Zeyede: Excessive Exposure to Dust Among Cleaners in the Ethiopian Cement Industry…………544
ZHOU, Yue: Letter to the Editor…………D88
ZHU, Ying: Comparing Gravimetric and Real-Time Sampling of PM2.5 Concentrations Inside Truck Cabins…………662
ZHUANG, Ziqing: Laboratory Study to Assess Causative Factors Affecting Temporal Changes in Filtering Facepiece Respirator Fit: Part I – Pilot Study…………729