Abstract
Steady-state axisymmetric simulations using the Reynolds-Averaged Navier-Stokes equations have been carried out in order to optimize the performance of a Chemical, Biological, Radiological, and Nuclear (CBRN) canister filter for its use in a powered air-purifying respirator (PAPR). Alterations have been made to the shape of the canister, the spacing of the rear wall of the canister with regard to the carbon filter, and the bracketing between (i) the particulate filter and the carbon bed and (ii) the carbon bed and the canister wall. The pressure drops across the canister and the residence time distribution at the rear of the carbon bed have been analyzed in detail based on an extensive parametric analysis involving the aforementioned variations. It has been demonstrated that the non-uniform porosity profile of the carbon bed resulted in alternating regions of high and low velocity close to the canister wall, providing a possible route for breakthrough. Designs, which included a bracket at the rear of the carbon bed, blocked this route and consequently had a longer minimum mean residence time than those, which did not. It has also been shown that the spacing between the carbon bed and the canister rear wall had a large impact on both residence time and pressure drop. In cases where the carbon backed directly onto the canister rear wall flow in the axial direction from the outside wall toward the canister axis resulted in far greater pressure drop and a reduction in minimum mean residence time within the carbon bed.