![Sample our Built Environment journals, sign in here to start your access, Latest two full volumes FREE to you for 14 days]({"type":"image" , "src" : "/sda/5926/TOC-Subject-Sample-2021-Built-Environment.jpg"})
Abstract
Fast pyrolysis of spent coffee waste, a major non-cellulosic material, and oak wood chips, a cellulosic material, was carried out in a micro tubular reactor over a temperature range of 550 to 750°C with sweep gas flow rates of 20 and 500 mL/min. When the temperature was raised from 550 to 750°C, the gas yields were significantly enhanced, but the liquid yields were reduced. The highest liquid yield, 63.4 wt%, was obtained after pyrolysis of spent coffee waste at 550°C at a sweep gas rate of 500 mL/min. The highest gas yield, 65.74 wt%, was obtained after pyrolysis of the oak wood chips at 750°C at a sweep gas flow rate of 20 mL/min. The gas products primarily included considerable amounts of CO, CO2, and hydrocarbon-rich gases but no hydrogen. Furthermore, regardless of the biomass source, the hydrocarbon-rich gases were qualitatively similar and largely consisted of methane, ethane, ethylene, propane, and propylene. The gas chromatography-mass spectrometry analysis of the pyrolyzed bio-oils demonstrated that the major compounds were phenol derivatives, aldehydes, ketones, acids, and alcohols.