![Sample our Built Environment journals, sign in here to start your access, Latest two full volumes FREE to you for 14 days]({"type":"image" , "src" : "/sda/5926/TOC-Subject-Sample-2021-Built-Environment.jpg"})
ABSTRACT
This article analyzes the indoor climate that creates risk of damages in naturally ventilated churches in the cold climate of Estonia. Indoor temperature and humidity were measured over a one-year period and the results were analyzed on the basis of damage functions: mold growth, risk of cracking and fracturing of wooden objects, and delamination of the gesso layer of panel paintings.
In unheated churches, one of the most dominant problems was very high relative humidity throughout the year, creating a high risk for mold and algae growth. Churches may need background heating to avoid freezing during a long cold winter that causes low surface temperatures of massive walls during the spring–summer period. It was found that mold risk was significantly lower in heated churches than in unheated or intermittently heated churches. The risk of mold growth was not decreased by the use of intermittent heating.
In heated churches, overheating (room temperature >+10ºC) causes a RH below 50% during cold periods, and the favorable period for irreversible response of panel paintings was significantly longer, so there is a higher risk that the gesso may crack or delaminate. From the point of view of the cracking and fracturing of wood, indoor climate conditions are in the safe range for most of the year.
Funding
This work was supported by the Estonian Ministry of Education and Research under Grant IUT1−15 “Nearly-zero energy solutions and their implementation on deep renovation of buildings”; Central Baltic Interreg IV A program under project SMC “Sustainable Management of Historic Rural Churches in the Baltic Sea Region”.