Effect of knife wear on finger-joint strength of silver fir (Abies alba) wood

Abstract

This study was carried out to determine the effect of knife wear, as measured in hours of use, on the finger-joint strength of silver fir wood (Abies alba), bonded with polyurethane (PU) and polyvinyl acetate (PVAc) adhesives. Wood samples were collected after 1, 32 and 64 h of knife wear. Results showed that as knife wear increased, bending strength or modulus of rupture (MOR) of the finger-jointed samples was reduced by 11.1% (PVAc) to 21.2% (PU) after 32 h of knife wear, and by 19.6% (PVAc) to 27.6% (PU) after 64 h of knife wear, whereas modulus of elasticity (MOE) of the finger-jointed samples was reduced by 10.5% (PVAc) to 12.5% (PU) after 32 h of knife wear, and by 11.7% (PVAc) to 10.0% (PU) after 64 h of knife wear. Tension strength of the finger-jointed samples was reduced by 2.1% (PVAc) to 1.5% (PU) after 32 h of knife wear, and by 5.4% (PVAc) to 16.0% (PU) after 64 h of knife wear.

Keywords:

• Bending strength
• finger-joint
• knife wear
• silver fir wood
• tension strength

Acknowledgements

The author would like to thank Mr P. Giotas of Giotas S. A. in Grevena for the supply of the samples. No funding has been received for this work.