Undrained behaviour of Changi sand in triaxial and plane-strain compression

Abstract

The results of an experimental study of the undrained behaviour of Changi sand under axisymmetric and plane-strain conditions are presented. K₀ consolidated undrained plane-strain tests and K₀ or isotropically consolidated triaxial tests on very loose and medium dense specimens were conducted. The undrained behaviour of sand at very loose and medium dense states under plane-strain conditions was characterised and compared with that under axisymmetric conditions. It was observed that the undrained behaviour of very loose and medium dense sand under plane strain is similar to that under axisymmetric conditions. However, because of the formation of shear bands in plane-strain tests, the post-peak behaviour of medium dense sand in plane strain is different from that in triaxial tests. It was also established that an instability line for plane-strain conditions can be defined in a way similar to that for axisymmetric conditions. Using the state parameter, a unified relationship between the normalised slope of instability line and the state parameters can be established for both axisymmetric and plane-strain conditions. Using this relationship, the instability conditions established under axisymmetric conditions can be used for plane-strain conditions.

Keywords:

• sand
• laboratory tests
• stress–strain behaviour
• liquefaction
• triaxial
• plane strain

Acknowledgements

Some of the test results presented in this paper were obtained by Dr W.K. Leong and Ms W.L. Loke. Their contributions are gratefully acknowledged.