Estimating Menard pressuremeter modulus and limit pressure from SPT in silty sand and silty clay soils. A case study in Mashhad, Iran

Abstract

The Menard pressuremeter test is a relatively expensive in situ test, which generates useful information about the strength and deformation properties of any soil and weak rock, which is carried out in some projects. On the other hand, the SPT test is a rather inexpensive, simple and typical in situ test used to determine the engineering properties of silt, clay, sand, and fine gravel which is utilised in almost all projects.

In this study SPT blow counts (N₆₀) were correlated with pressuremeter modulus (E_PMT) and limit pressure (P_L) and empirical equations were proposed to estimate P_L and E_PMT from N₆₀ in silty sand and silty clay soils separately. These tests have been conducted during subway geotechnical investigation in Mashhad, Iran.

Moreover, in order to verify these empirical equations, they were compared with similar equations that have been proposed by other researchers. These comparisons display that in all equations a linear relationship exists between N₆₀ - E_PMT and N₆₀ - P_L. However, the line slopes are different so it can be concluded the line slopes are related to soil type and geological condition of an area. Thus, for each area a separate empirical equation must be presented.

Keywords:

• standard penetration test
• pressuremeter modulus
• limit pressure