Post-work inspection for overbreak in tunnels: a case study application to the Alqueva hydroelectric plant

ABSTRACT

This work seeks to contribute to the understanding of the intrinsic, geological-geotechnical and operational causes of overbreak in tunnels through the case study of the overbreak of two tunnels during the construction phase of the Alqueva hydroelectric plant in Portugal. The excavations were carried out in lithologies with good geotechnical characteristics, for this reason, overbreak was not expected. To determine if the overbreak was done due to operational negligence, mathematical models were developed to quantify (1) the overbreak by the peripheral divergence involving the specific load of the explosives used in the peripheral zone of the tunnel, (2) the geotechnical quality of the rock mass, and (3) the operational aspects. For the mathematical modelling, it was necessary to characterise the causes of excavation damage zone (EDZ), considering the participation of the developer and the contractor. To analyse the calculations and determine the acceptable limits, the Swiss standard SIA 198, which recommends a maximum tolerable overbreak, was used.

KEYWORDS:

• Overbreak
• methodology
• peripheral divergence
• geotechnical quality
• operational aspects
• post-work inspection

List of notations

Table

Acknowledgments

The authors would like to thank the Vale Institute of Technological for the material resources for the preparation of this study and the Geotechnical Centre of the Technological Institute of Lisbon for providing the data.

Disclosure statement

No potential conflict of interest was reported by the author(s).