ABSTRACT
Stone columns are widely used around the world as cost-effective soil improvement techniques for highways and embankments. They are also used as drainage to expedite the consolidation period, and accordingly to increase the allowable pressure, reduce settlement, and reduce the liquefaction potential for shallow foundations. Currently the design of these columns is based on the unit cell or homogenised material concepts, which neglect the effect of the interaction of the columns. This paper presents a 3-D numerical model using the finite element technique and the commercial software ‘ABAQUS’ to simulate the case of a group of stone columns installed in soft clay. The model is capable of capturing the interaction between columns and the surrounding soil and of establishing the mode of failure of the system. After validating the model with the available experimental results, it was used to predict the allowable pressure and the failure mechanism of groups of stone columns for given geometry/soil conditions. An improvement factor was introduced ‘IF’, which is defined as the ratio of the capacity of the improved to the unimproved soft clay. The results of this investigation are presented in the form of design charts to assist the engineer to determine the level of improvement needed to achieve a given allowable pressure for the foundation.
Acknowledgments
The financial support from the National Science and Engineering Research Council of Canada (NSERC) and Concordia University are acknowledged.
Disclosure statement
No potential conflict of interest was reported by the author(s).
Data availability statement
Some or all data, models, or code that support the findings of this study are available from the corresponding author upon request.