ABSTRACT
Co-briquetting of coal fines and lignocellulosic biomass is a possible path for incorporating biomass energy into the current coal-based infrastructure, although the cost and performance of conventional binders remain problematic. The use of steam-exploded sugarcane bagasse (SE SCB) as a binder for coal fines briquetting was therefore investigated. SE SCB (produced at 140–220°C for 15 min) was mixed with high-ash bituminous coal-fines at various concentrations (0–18%), and briquetted at a pressure value of 24 MPa and at various temperatures (25–180°C). Following multivariate optimization, an optimal steam explosion temperature range of 185–195°C was found. At these pretreatment temperatures, sufficient disruption of the lignocellulosic structure occurred, resulting in increased binding between coal fines and SCB, while higher temperatures resulted in detrimental destruction of fiber structure and reduction in binding performance. A synergistic interaction between briquetting temperatures and SE SCB content above 100°C and 13%, respectively, substantially improved briquette properties. At these optimum conditions, the briquettes had a compressive strength of 1205 kPa, an abrasion resistance of 97%, water absorption index of 82%, and a wet compressive strength of 501 kPa. Briquettes maintained structural integrity when pyrolyzed at 700°C and had a post-pyrolysis compressive strength of 134 kPa, indicating that SE SCB could potentially be a suitable binder for coal fines briquetting.
Acknowledgments
We would like to thank the South African Coal Processing Society (SACPS) as well as SASOL for their assistance in funding this research with no involvement in study design; in the collection of data; analysis or interpretation of data; in the writing of the report; or in the decision to submit the article for publication.
Disclosure Statement
The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper.
Supplementary Data
Supplemental data for this article can be accessed online at https://doi.org/10.1080/19392699.2023.2179041.