![Sample our Engineering & Technology journals, sign in here to start your access, latest two full volumes FREE to you for 14 days]({"type":"image" , "src" : "/sda/5933/TOC-Subject-Sample-2021-Engineering-Tech.jpg"})
Abstract
The commercially available macroporous resin XAD4 was evaluated for its capacity to adsorb the polyphenols contained in olive mill wastewater (OMWW). The adsorption was performed in the mode of fixed packed bed contactor. The effects of OMWW flow rate, temperature, dilution and pH on the resin adsorption capacity were investigated. Polyphenols concentration decreased with time. The pattern of the total polyphenols concentration dependence on time was found similar in all cases. The pattern included a very steep section for roughly the first 2 h of the operation, followed by a second section of decreasing gradient down to a final asymptotic equilibrium limit. Neither the time required for approaching the equilibrium nor the magnitude of the equilibrium concentration was substantially affected by the OMWW temperature. The increase of OMWW flow rate affected markedly the speed of approaching the equilibrium but not its position. The variation of the total polyphenols concentration showed that higher concentrations yielded more rapid kinetics at the initial section, but no apparent differentiation of the time was required to approach equilibrium. Acidic pH appeared to be favourable for the adsorption. Finally, a novel modelling approach was developed to simulate the adsorption process kinetics.
Acknowledgements
The authors are grateful to Dimitrios Tsakiridis Olive Mill Company, Pournari, Larissa, Greece for their support by providing the raw OMWW material which was used in this work. Furthermore, the authors want to extend their gratitude to the Greek Ministry of Education for supporting this research through the ARCHIMEDES III GRANT CODE No: 33/32/4.