Abstract
Activated persulfate generated from Fe2+-sodium persulfate (SPS) was used as a conditioner for dewatering of waste activated sludge. The effects of Fe2+-SPS on dewaterability were investigated by specific resistance to filtration (SRF) and capillary suction time (CST), as well as further confirmed the results with diaphragm filter press dewatering process in laboratory. The amount of extracellular polymeric substances (EPS) and zeta potentials were analyzed. With 30 mg Fe2+ per gram dry solid (DS) and 100 mg SPS per gram DS, 89.0% of SRF and 84.1% of CST reductions were achieved, respectively. Furthermore, the dewatered cake moisture content was as low as 52.6% in the diaphragm filter press dewatering. The EPS fractions and zeta potential of the sludge floc were found to have significantly changed during the Fe2+-SPS conditioning. Proteins and polysaccharides contents in filtrate all increased with increase in the amount of Fe2+-SPS, but decreased in tightly bound EPS (TB-EPS). The change of proteins content in loosely bound EPS (LB-EPS) was more significant than polysaccharides. Scanning electron microscope images further demonstrated that the Fe2+-SPS pre-treatment ruptured the sludge floc resulting in the formation of permeable and incompressibility structure in filtration process.
Acknowledgments
The author would like to appreciate the financial support provided by the National Natural Science Foundation of China (51078162), the Wuhan Planning Project of Science and Technology (201260723226), the Fundamental Research Funds for the Central Universities (2013TS071), the Research Project of Chinese Ministry of Education (113046A), and the Project on Technical of Research and Development of Shenzhen (CXY201106210008A). The authors would also like to thank the Analytical and Testing Center of Huazhong University of Science and Technology, for providing the facilities for the experimental measurements.