Multi-objective optimization of a Stirling cooler using particle swarm optimization algorithm

Abstract

The Stirling cooler is a potential substitute for the vapor compression refrigeration system in a moderate-temperature zone. An isothermal model of a Stirling cooler based on finite time thermodynamics is established. The expressions of input power, cooling capacity, and coefficient of performance (COP) are derived. The input power, cooling capacity, and COP of the Stirling cooler are optimized simultaneously using the particle swarm optimization (PSO) algorithm. The performance of the multi-objective particle swarm optimization (MOPSO) algorithm is tested by four benchmark functions. The technique for order preference by similarity to an ideal solution (TOPSIS) is used to obtain the global optimal solution. According to the global optimal solution, the Stirling cooler obtains the performance with an input power of 106.5 W, a cooling capacity of 266.7 W, and a COP of 2.5. Compared with the results obtained by the single-objective optimization of cooling capacity, the COP increases by 42.0%, and the input power decreases by 59.3%. Finally, a sensitivity analysis of heat exchangers on the cooling capacity is carried out. The result shows that the cooling capacity is more sensitive to the hot-side heat exchanger in the optimal design point.

Disclosure statement

No potential conflict of interest was reported by the author(s).

Additional information

Funding

This work was supported by the National Natural Science Foundation of China under grant number 50906054.