![Sample our Physical Sciences journals, sign in here to start your FREE access for 14 days]({"type":"image" , "src" : "/sda/110819/TOC-Subject-Sample-2021-Physical-Sciences.jpg"})
Abstract
The residual lignins KRL and SRL, isolated from a conventional kraft pulp and a SuperBatch pulp respectively, were reacted with peroxyformic acid (PFA). The reagent consumptions were determined and the products fractionated according to their solubility. Both lignins consumed a roughly equal amount of PFA, which was nearly 50% higher than that consumed by kraft lignin. The undissolved fractions of PFA-treated residual lignins (yield >80%) contained less aromatic units, phenolic hydroxyl and methoxyl groups, and considerably more carboxyl groups (including those of formate esters) than the untreated lignins. The extent of these modifications was approximately equal for KRL and SRL, which together with the similar PFA consumptions and product yields of KRL and SRL indicates that the two residual lignins showed no essential difference in reactivity toward PFA. The effect of fiber wall morphology on delignification efficiency during PFA delignification is suggested to be small because of the cleavage of lignin-carbohydrate linkages occurring under acid conditions. The part of KRL remaining insoluble after PFA-treatment had a 40% higher molar mass than KRL while in the case of SRL there was hardly any such difference in molar mass. The lignins solubilized during the PFA treatments represented the most highly degraded part of the lignins, having very low molar masses and being richer in carboxyl groups and lower in aromatic units, phenolic hydroxyl, and methoxyl groups than the undissolved lignins.