A three-dimensional model of steady flame spread over a thin solid in low-speed concurrent flows

Abstract

Athree-dimensional model of a steady concurrent flame spread over a thin solid in a low-speed flowtunnel in microgravity has been formulated and numerically solved. The gas-phase combustion model includes the full Navier-Stokes equations for the conservation of mass, momentum, energy and species. The solid is assumed to be a thermally thin, non-charring cellulosic sheet and the solid model consists of continuity and energy equations whose solution provides boundary conditions for the gas phase. The gas-phase reaction is represented by a one-step, second-order, finite-rate Arrhenius kinetics and the solid pyrolysis is approximated by a one-step, zeroth-order decomposition obeying an Arrhenius law. Gas-phase radiation is neglected but solid radiative loss is included in the model. Selected results are presented showing detailed three-dimensional flame structures and flame spread characteristics.

In a parametric study, varying the tunnel (solid) widths and the flow velocity, two important three-dimensional effects have been investigated, namely wall heat loss and oxygen side diffusion. The lateral heat loss shortens the flame and retards flame spread. On the other hand, oxygen side diffusion enhances the combustion reaction at the base region and pushes the flame base closer to the solid surface. This closer flame base increases the solid burnout rate and enhances the steady flame spread rate. In higher speed flows, three-dimensional effects are dominated by heat loss to the side-walls in the downstream portion of the flame and the flame spread rate increases with fuel width. In low-speed flows, the flames are short and close to the quenching limit. Oxygen side diffusion then becomes a dominant mechanism in the narrow three-dimensional flames. The flame spreads faster as the solid width is made narrower in this regime. Additional parametric studies include the effect of tunnelwall thermal condition and the effect of adding solid fuel sample holders.